
1 / 2 · Click to enlarge
At a glance
Made by RENESAS, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Gas Sensor; heater voltage 5.4 VDC at TSENSOR = 240 degree C.; heater resistance typically 30 Ω (At room temperature). Check that your power source supplies 5.4 VDC at TSENSOR = 240 degree C. before connecting it.
Key Highlights
- Item Type: Gas Sensor
- Heater Voltage: 5.4 VDC at TSENSOR = 240 degree C.
- Heater Resistance: typically 30 Ω (At room temperature)
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Gas Sensor |
|---|---|
| Heater Voltage | 5.4 VDC at TSENSOR = 240 degree C. |
| Heater Resistance | typically 30 Ω (At room temperature) |
| Sensing voltage | 2.5 to 5.0 VDC |
| Sensing Temperature (°C) | 240 °C at VH = 5.4V |
| Environmental Temperature (°C) | -20 to 50 °C |
| Storage Temperature (°C) | -50 to 125 °C |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 5 × 5 × 1 cm |
Overview
The RENESAS Gas Detection Sensor, Hydrogen (H2), Diffusion, SGAS Series, made by RENESAS, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Gas Sensor
- Heater Voltage: 5.4 VDC at TSENSOR = 240 degree C. (match this to your power supply; too high a voltage can damage the part)
- Heater Resistance: typically 30 Ω (At room temperature)
- Sensing voltage: 2.5 to 5.0 VDC (match this to your power supply; too high a voltage can damage the part)
- Sensing Temperature (°C): 240 °C at VH = 5.4V
- Environmental Temperature (°C): -20 to 50 °C
- Storage Temperature (°C): -50 to 125 °C (space for firmware, files or media)
- Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
adsorbed gases have significant electronic effects on the individual grains. These gas-solid interactions result in a change in electron (or hole) density at the surface (i.e., a space charge forms), which in turn changes the electrical conductivity of the oxide. IDT has developed a set of nanostructured gas sensing materials with excellent sensitivity and stability. Applications:
- Leak Detection
- Gas Concentration Detection
- Breath Detection
Specifications:
- High sensitivity to low hydrogen concentrations (<10 to 1000 ppm)
- Fast response time (<15 seconds at 100ppm)
- Environmental temperature range of -20°C to 50°C
- Environmental humidity range of 0% to 90% RH,
non-condensing - Low dependence on flow rate
- Rugged, reliable sensor based on IDT’s exclusive technology
Packages Includes:
1 x RENESAS Gas Detection Sensor, Hydrogen (H2), Diffusion, SGAS SeriesQuick specs
- Item Type
- Gas Sensor
- Heater Voltage
- 5.4 VDC at TSENSOR = 240 degree C.
- Heater Resistance
- typically 30 Ω (At room temperature)
- Sensing voltage
- 2.5 to 5.0 VDC
- Sensing Temperature (°C)
- 240 °C at VH = 5.4V
- Environmental Temperature (°C)
- -20 to 50 °C



















