Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by RENESAS, this memory ic is a good fit for everyday home and hobby use. Main specs: manufacturer RENESAS; flash memory Serial NOR; interface SPI. Check that your power source supplies 1.7 to 3.6 before connecting it.

Key Highlights

  • Manufacturer: RENESAS
  • Flash Memory: Serial NOR
  • Interface: SPI

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerRENESAS
Flash MemorySerial NOR
InterfaceSPI
No. of Pins8
Supply Voltage1.7 to 3.6
IC MountingSurface Mount
Operating Temperature (°C)-40 to 85
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The AT45DB641E-SHN-B-RENESAS-Flash Memory, DataFlash, Serial NOR, 64Mbit, 32K Pages x 264Byte, SPI, WSOIC-8, made by RENESAS, is listed in our memory ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: RENESAS
  • Flash Memory: Serial NOR (more memory leaves room for larger programs and buffers)
  • Interface: SPI (confirm your cable or board uses the same connector)
  • No. of Pins: 8
  • Supply Voltage: 1.7 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • IC Mounting: Surface Mount
  • Operating Temperature (°C): -40 to 85
  • Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The AT45DB641E is a 1.7V minimum, serial-interface sequential access Flash memory ideally suited for a wide variety of digital voice, image, program code, and data storage applications. The AT45DB641E also supports the RapidS serial interface for applications requiring very high speed operation. Its 69,206,016 bits of memory are organized as 32,768 pages of 256 bytes or 264 bytes each. In addition to the main memory, the AT45DB641E also contains two SRAM buffers of 256/264 bytes each. Interleaving between both buffers can dramatically increase a system's ability to write a continuous data stream. In addition, the SRAM buffers can be used as additional system scratch pad memory, and E2 PROM emulation (bit or byte alterability) can be easily handled with a self-contained three step read-modify-write operation. Unlike conventional Flash memories that are accessed randomly with multiple address lines and a parallel interface, the DataFlash® uses a serial interface to sequentially access its data. The simple sequential access dramatically reduces active pin count, facilitates simplified hardware layout, increases system reliability, minimizes switching noise, and reduces package size. The device is optimized for use in many commercial and industrial applications where high-density, low-pin count, low-voltage, and low-power are essential. To allow for simple in-system re-programmability, the AT45DB641E does not require high input voltages for programming. The device operates from a single 1.7V to 3.6V power supply for the erase and program and read operations. The AT45DB641E is enabled through the Chip Select pin (CS) and accessed via a 3-wire interface consisting of the Serial Input (SI), Serial Output (SO), and the Serial Clock (SCK). All programming and erase cycles are self-timed.

Features:

  1. Single 1.7V - 3.6V supply
  2. Program and Erase Suspend/Resume
  3. Hardware and software controlled reset options
  4. JEDEC Standard Manufacturer and Device ID Read
  5. Endurance: 100,000 program/erase cycles per page minimum
  6. Data retention: 20 years
  7.  Complies with full industrial temperature range

Package Includes:

1 x AT45DB641E-SHN-B-RENESAS-Flash Memory, DataFlash, Serial NOR, 64Mbit, 32K Pages x 264Byte, SPI, WSOIC-8

Quick specs

Manufacturer
RENESAS
Flash Memory
Serial NOR
Interface
SPI
No. of Pins
8
Supply Voltage
1.7 to 3.6
IC Mounting
Surface Mount
See all specifications