Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The Seeed Studio Grove BLE dual model adds Bluetooth 4.0 SPP and BLE connectivity to your projects via a standard Grove connector. It supports AT commands for flexible configuration of RF power, baud rate, and device name, with low power consumption under 10 mA.

Key Highlights

  • Bluetooth 4.0 dual-mode module with BLE and SPP support
  • AT command configuration for RF power, baud rate, and name
  • Adjustable RF power from -23 dBm to 6 dBm
  • Standard Grove connector for easy plug-and-play wiring
  • Low working current under 10 mA and sleep mode under 1 mA
  • Onboard K2 button for disconnect or factory reset

Ideal For

  • Makers adding Bluetooth to Arduino projects
  • Students learning wireless serial communication
  • Engineers prototyping IoT devices
  • Raspberry Pi enthusiasts needing BLE connectivity
  • Educators building Bluetooth demos

Buying Tip

Check that your host board has a Grove connector or a Grove base shield, and confirm whether you need 3.3 V or 5 V operation before powering the module.

Elecvora expert review

Our verdict

The Seeed Studio Grove BLE dual model is a solid, well-documented module for adding Bluetooth 4.0 connectivity to Grove-based projects. Its AT command interface and adjustable RF power give useful flexibility, though it requires familiarity with serial commands.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Easy plug-and-play with Grove connector
  • AT commands allow custom baud rate, name, and RF power
  • Low power consumption suitable for battery projects
  • Dual-mode SPP and BLE support

Cons

  • Requires a Grove base shield or compatible host
  • Configuration via AT commands may be challenging for beginners
  • Limited to 6K byte speed

Best for

Makers and engineers using Grove systems who need configurable Bluetooth serial communication.

Not ideal for

Those seeking a solderless, app-only Bluetooth solution without serial configuration.

Specifications

Item TypeSeeedStudio Module
Bluetooth VersionBLE
RF Power-23dbm, -6dbm, 0dbm, 6dbm, can modify through AT Command AT+POWE
Speed Asynchronous6K Bytes, Synchronous: 6K Bytes
Sensitivity (dBm)≤-84dBm at 0.1% BER
Service Central PeripheralUUID FFE0,FFE1
Operating Temperature (°C)–5 ~ +65 Centigrade
Working Current (mA)< 10 mA
Source Current< 20 mA
Sleep Mode Current< 1 mA
Shipping Weight0.017 kg
Shipping Dimensions9 × 7 × 2 cm

What's in the box

  • 1 x Seeed Studio Grove BLE (dual model) module

Frequently Asked Questions

What is the difference between SPP and BLE modes?
SPP (Serial Port Profile) emulates a serial port over Bluetooth Classic, while BLE (Bluetooth Low Energy) is designed for low-power data transfer. The module supports both, and you can choose based on your device compatibility.
How do I change the RF power?
Use the AT command AT+POWE followed by the desired power level (-23, -6, 0, or 6 dBm). This lets you balance range and power consumption.
What voltage does the module require?
The module operates at 3.3 V or 5.0 V DC, making it compatible with both 3.3 V and 5 V microcontrollers.
What is included in the package?
The package includes one Seeed Studio Grove BLE (dual model) module. A Grove cable is not included unless specified.
How do I reset the module to factory settings?
Press and hold the K2 button for more than 100 ms while in sleep mode to restore factory settings.
What is the operating temperature range?
The module operates between -5 °C and +65 °C, suitable for indoor and sheltered outdoor use.

Overview

The Seeed Studio Grove BLE (dual model) is a Bluetooth 4.0 module designed for quick integration into microcontroller projects. It uses a CSR dual-mode Bluetooth chip with an ARM architecture single chip that supports AT instructions, allowing you to configure serial baud rate, device name, and pairing password to match your application. The module provides both SPP (Serial Port Profile) and BLE (Bluetooth Low Energy) connectivity, making it suitable for a wide range of wireless serial communication tasks.

Key Features

  • Dual-mode Bluetooth 4.0: Supports both SPP and BLE for flexible connectivity.
  • AT command control: Adjust RF power, baud rate, device name, and pairing password via simple AT commands.
  • Adjustable RF power: Choose from -23 dBm, -6 dBm, 0 dBm, or 6 dBm to balance range and power consumption.
  • Grove connector: Standard J1 Grove connector enables plug-and-play with Grove-compatible base shields and cables.
  • Status LED and K2 button: LED indicates sleep (slow flash) or connected (steady on); K2 button disconnects or restores factory settings.
  • Low power: Working current under 10 mA, source current under 20 mA, and sleep mode current under 1 mA.

Specifications Explained

Bluetooth version: Bluetooth 4.0 with BLE support ensures compatibility with modern devices while maintaining low energy use.

RF power: The module can transmit at -23 dBm, -6 dBm, 0 dBm, or 6 dBm. Lower power reduces consumption and range; higher power extends range. You can modify this through the AT+POWE command.

Speed: Asynchronous and synchronous speeds are both 6K bytes, suitable for typical sensor data and control signals.

Sensitivity: ≤-84 dBm at 0.1% BER means the receiver can pick up weak signals reliably.

Service UUIDs: FFE0 and FFE1 are used for BLE central and peripheral roles.

Operating temperature: -5 to +65 °C suits indoor and sheltered outdoor use.

Current: Working current under 10 mA, source current under 20 mA, and sleep current under 1 mA make it friendly for battery-powered projects.

Compatibility and Requirements

The module uses a standard Grove connector (J1) and requires a Grove-compatible host or base shield. It operates at 3.3 V or 5.0 V DC. Configuration is done via AT commands over serial, so a serial terminal or microcontroller with UART is needed. No additional software is required beyond a serial connection.

Typical Uses

  • Wireless serial communication between microcontrollers and smartphones or PCs.
  • Adding Bluetooth connectivity to Arduino or Raspberry Pi projects.
  • Remote sensor data logging and control.
  • Prototyping IoT devices with BLE.
  • Educational projects exploring Bluetooth communication.

What's in the Box

  • 1 x Seeed Studio Grove BLE (dual model) module

Quick specs

Item Type
SeeedStudio Module
Bluetooth Version
BLE
RF Power
-23dbm, -6dbm, 0dbm, 6dbm, can modify through AT Command AT+POWE
Speed Asynchronous
6K Bytes, Synchronous: 6K Bytes
Sensitivity (dBm)
≤-84dBm at 0.1% BER
Service Central Peripheral
UUID FFE0,FFE1
See all specifications