
1 / 4 · Click to enlarge
AI Summary
A compact Grove-compatible speaker module with an LM386 amplifier and an onboard volume potentiometer. It gives Arduino and Raspberry Pi projects clear, adjustable audio output from a single connector.
Key Highlights
- LM386 audio amplifier delivers a 46 dB voltage gain
- Onboard potentiometer for quick, tool-free volume adjustment
- Grove-compatible interface for single-connector wiring
- Operates from 4 to 5.5 VDC, matching common logic supplies
- Lightweight 12 g module with 2 mm mounting holes
- Produces different tones from different input frequencies
Ideal For
- Arduino beginners following Grove starter tutorials
- Raspberry Pi makers adding audio alerts to a project
- STEM educators teaching tone generation and amplification
- Electronics hobbyists building a coded music box
- Makers who need quick audible feedback in a compact build
Buying Tip
Check that your controller can supply 4 to 5.5 VDC and has a Grove-compatible port or an adapter before ordering.
Elecvora expert review
Our verdict
A practical, well-integrated audio output module that removes the fiddly part of adding sound to a microcontroller project. The onboard gain and volume control make it forgiving for beginners while staying useful for experienced makers.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- LM386 stage provides plenty of gain for small signals
- Volume adjustable on the board without code changes
- Grove connector keeps wiring simple and reliable
- Lightweight with mounting holes for panel fixing
Cons
- Best suited to tones and alerts rather than full music playback
- Requires a controller and supply within the stated voltage range
- Audio quality depends on the input signal you generate
Best for
Makers adding clear, adjustable audio feedback to Arduino or Raspberry Pi projects
Not ideal for
Listeners expecting hi-fi music playback from a small module
Specifications
| Weight (g) | 12 |
|---|---|
| Operating Voltage (VDC) | 4 to 5.5 |
| Voltage Gain (dB) | 46 |
| Bandwidth | 20 |
| Length (mm) | 130 |
| Width (mm) | 90 |
| Mounting Hole Diameter (mm) | 2 |
| Shipping Weight | 0.016 kg |
| Shipping Dimensions | 9.5 × 6.8 × 1.2 cm |
What's in the box
- 1 x Seeed Studio Grove Speaker
Frequently Asked Questions
What voltage does the Grove Speaker need?
Can I change the loudness without editing code?
Which boards can I use it with?
How do I produce different sounds?
What is included with the product?
Is it suitable for playing full music tracks?
Overview
The Seeed Studio Grove Speaker is an audio output module built for microcontroller projects. It combines a small speaker with an LM386 amplifier and a Grove-compatible connector, so you can add sound to an Arduino or Raspberry Pi build without designing an amplifier circuit yourself. Instead of a thin buzzer beep, you get amplified voice and tone output that is easy to hear.
Because the module handles amplification onboard, the signal from your board only needs to carry the audio content. You code the tones or melodies, and the module takes care of driving the speaker.
Key Features
- LM386 amplification: a 46 dB voltage gain raises low-level signals to audible output.
- Adjustable volume: a built-in potentiometer lets you change loudness directly on the board.
- Grove interface: a single connector keeps wiring tidy and beginner-friendly.
- Flexible tone generation: feed different input frequencies to produce different tones.
- Compact and light: 12 g weight and 2 mm mounting holes for easy fixing.
Specifications Explained
Operating voltage of 4 to 5.5 VDC matches the typical 5 V supply used by many development boards, with a little headroom on either side. Stay inside that window to keep the amplifier behaving predictably.
Voltage gain of 46 dB describes how much the LM386 stage boosts the incoming signal. In practice, it means quiet audio from your microcontroller becomes clearly audible through the speaker.
Bandwidth of 20 relates to the frequency range the module handles, which is well suited to tones, alerts and simple melodies rather than full-range music playback.
Dimensions of 130 mm by 90 mm describe the module footprint, and the 2 mm mounting holes let you secure it to a panel or chassis. At 12 g, it adds almost nothing to the weight of a handheld project.
Compatibility and Requirements
The module is designed for Grove-compatible boards and controllers, including Arduino and Raspberry Pi projects. You need a controller that can output a signal to the speaker and a supply within the 4 to 5.5 VDC range. Seeed Studio publishes guidance documents, including a Getting Started preface and an introduction to Grove, which are worth reading before first use, especially if you are new to the ecosystem.
Typical Uses
- Audible alerts and status notifications in Arduino builds
- Simple melody and music box projects driven by coded frequencies
- Single audio signalling in Raspberry Pi setups
- Teaching projects that demonstrate amplification and tone generation
- Adding sound feedback to compact, battery-friendly gadgets
What's in the Box
One Seeed Studio Grove Speaker module is included.
Quick specs
- Weight (g)
- 12
- Operating Voltage (VDC)
- 4 to 5.5
- Voltage Gain (dB)
- 46
- Bandwidth
- 20
- Length (mm)
- 130
- Width (mm)
- 90





















