
1 / 2 · Click to enlarge
At a glance
Made by Seeed Studio, this arm microcontrollers ic is a good fit for makers, students and electronics hobbyists. Main specs: manufacturer Seeed studio; frequency rating 240MHz; operating temperature (°c) -40 to 65.
Key Highlights
- Manufacturer: Seeed studio
- Frequency Rating: 240MHz
- Operating Temperature (°C): -40 to 65
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Manufacturer | Seeed studio |
|---|---|
| Frequency Rating | 240MHz |
| Operating Temperature (°C) | -40 to 65 |
| Clock Frequency | up to 240 |
| Processor | ESP32-S3R8 Xtensa LX7 dual-core,32-bit processor that operates at up to 240 MHZ |
| Memory Capacity | 8M PSRAM & 8MB Flash |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
Overview
The Seeed Studio XIAO ESP32S3 - 2.4GHz WiFi, BLE 5.0, made by Seeed Studio, is listed in our arm microcontrollers ic range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Manufacturer: Seeed studio
- Frequency Rating: 240MHz (make sure the rest of your system works at this frequency)
- Operating Temperature (°C): -40 to 65
- Clock Frequency: up to 240 (make sure the rest of your system works at this frequency)
- Processor: ESP32-S3R8 Xtensa LX7 dual-core,32-bit processor that operates at up to 240 MHZ (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Memory Capacity: 8M PSRAM & 8MB Flash (more memory leaves room for larger programs and buffers)
- Shipping Weight: 0.001 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 1 × 1 × 1 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Applications:
- Internet of Things
- Wearable devices
- Smart Homes
- Robotics
- Health monitoring
- Education
- Low-Power(LP) networking
- Rapid prototyping
Features:
- ESP32S3 32-bit dual-core Xtensa processor running at 240MHz
- Supports Arduino and MicroPython development
- 2.4GHz WiFi and BLE 5.0 with 100m+ remote communication (U.FL antenna)
- Lithium battery charge management and 4 power modes, with deep sleep at 14μA
- Thumb-sized design (21 x 17.5mm) in XIAO form factor, ideal for wearable devices
- Breadboard-friendly and SMD design, with no components on the back
- Perfect for Smart Homes, IoT, wearable devices, and robotics
Packages Include:
1 x Seeed Studio XIAO ESP32S3 - 2.4GHz WiFi BLE 5.0Quick specs
- Manufacturer
- Seeed studio
- Frequency Rating
- 240MHz
- Operating Temperature (°C)
- -40 to 65
- Clock Frequency
- up to 240
- Processor
- ESP32-S3R8 Xtensa LX7 dual-core,32-bit processor that operates at up to 240 MHZ
- Memory Capacity
- 8M PSRAM & 8MB Flash



















