Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Seeed Studio, this air quality sensor is a good fit for makers, students and electronics hobbyists. Main specs: item type Dust Sensor; operating voltage (v) 3.3 to 5.5; operating humidity 95% rh or less. Check that your power source supplies 3.3 to 5.5 before connecting it.

Key Highlights

  • Item Type: Dust Sensor
  • Operating Voltage (V): 3.3 to 5.5
  • Operating humidity: 95% rh or less

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeDust Sensor
Operating Voltage (V)3.3 to 5.5
Operating humidity95% rh or less
Operating Temperature (°C)0~45 °C
Dimensions (L x W x H) mm59(W) × 45(H) × 22(D) mm
Output FormatNegative Logic Digital output, High: over 4.0V(Rev.2), Low: under 0.7V
Detecting Range0~28,000 / 0 ~ 8000 pcs/liter / pcs/0.01cf
Shipping Weight0.027 kg
Shipping Dimensions13 × 8 × 2 cm

Overview

The Seeed Studio Grove - Dust Sensor(PPD42NS) - measuring PM 2.5,dual PWM output, made by Seeed Studio, is listed in our air quality sensor range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Dust Sensor
  • Operating Voltage (V): 3.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Operating humidity: 95% rh or less
  • Operating Temperature (°C): 0~45 °C
  • Dimensions (L x W x H) mm: 59(W) × 45(H) × 22(D) mm (measure your mounting space before ordering)
  • Output Format: Negative Logic Digital output, High: over 4.0V(Rev.2), Low: under 0.7V
  • Detecting Range: 0~28,000 / 0 ~ 8000 pcs/liter / pcs/0.01cf (quoted range is usually line-of-sight; walls and interference shorten it)
  • Shipping Weight: 0.027 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This Dust Sensor gives a good indication of the air quality in an environment by measuring the dust concentration. The Particulate Matter level (PM level) in the air is measured by counting the Low Pulse Occupancy time (LPO time) in a given time unit. LPO time is proportional to PM concentration. This sensor can provide reliable data for air purifier systems; it is responsive to PM of diameter 1μm.

Note: This sensor uses a counting method to measure dust concentration, not the weighing method, and the unit is pcs/L or pcs/0.01cf.

Getting started with SeeedStudio Grove Dust Sensor


Features: 

  1. Grove compatible interface(extra wire with connector)
  2. Stable and sensitive detection of not only cigarette smoke but also house dust which are indoor asthma triggers.
  3. Air is self-aspirated with the current of the air generation mechanism with a built-in heater.
  4. Easy maintenance. High sensitivity lasts long term.
  5. Dual output for the particle size over 1 micron and 2.5 microns (approx).
  6. More compact and lighter, and easy installation.
  7. PWM output

Application:

  1. Air Purifier
  2. Air Quality Monitor
  3. Air Conditioner
  4. Ventilator

Package Includes :

1 x SeeedStudio Grove Dust Sensor

Quick specs

Item Type
Dust Sensor
Operating Voltage (V)
3.3 to 5.5
Operating humidity
95% rh or less
Operating Temperature (°C)
0~45 °C
Dimensions (L x W x H) mm
59(W) × 45(H) × 22(D) mm
Output Format
Negative Logic Digital output, High: over 4.0V(Rev.2), Low: under 0.7V
See all specifications