Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A Grove-compatible 433MHz LoRa radio module built on the RFM95 transceiver and ATmega168 controller. It gives your project a long-range UART wireless link with an onboard wire antenna and an MHF connector for an external antenna.

Key Highlights

  • RFM95 transceiver based on SX1276 LoRa technology
  • 433MHz operating frequency for long-range spread-spectrum links
  • UART communication mode for simple serial control
  • 3.3V to 5V input suits common Grove and dev boards
  • Onboard wire antenna plus MHF connector for external antenna
  • Compact 40 x 20 mm board weighing about 11 g

Ideal For

  • IoT developers building long-range sensor nodes
  • Makers using Seeed Studio Grove boards and shields
  • Students learning LoRa and serial radio communication
  • Engineers prototyping remote telemetry links
  • Hobbyists adding 433MHz wireless to microcontroller projects

Buying Tip

Confirm your project and the receiving end both use the 433MHz band, and plan an MHF external antenna if your link distance or surroundings demand more gain.

Elecvora expert review

Our verdict

A tidy, well-integrated LoRa module that removes most of the wiring friction from 433MHz wireless projects. It suits Grove users who want a serial radio link without building a transceiver circuit from scratch.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Grove connector and cable simplify hookup
  • RFM95 transceiver with proven LoRa modulation
  • Onboard wire antenna plus MHF option for external antennas
  • Wide 3.3V to 5V input range
  • Low standby and receive current draw

Cons

  • Only the 433MHz band is covered by this version
  • External antenna must be bought separately
  • Best performance depends on careful antenna placement

Best for

Grove-based IoT and sensor projects needing a long-range serial link

Not ideal for

Projects operating on 868MHz or non-Grove wiring setups

Specifications

Model No. / NameSeeedStudio Grove Modules
Operating Frequency (MHz)433
Voltage Rating3.3 to 5
Input Voltage (V)5V/3.3V
Operating Temperature (°C)-20 to 70°C
Communication ModeUART
Operating Frequecy433Mhz
Length (mm)40
Width (mm)20
Weight (g)11
Mounting Hole Diameter (mm)2
Shipping Weight0.016 kg
Shipping Dimensions15 × 10 × 2 cm

What's in the box

  • 1 x Grove LoRa Radio 433MHz module
  • 1 x Grove cable

Frequently Asked Questions

What frequency does this module use?
This version operates at 433MHz. A separate 868MHz version is available if your project uses that band.
How does it connect to my board?
It uses a Grove cable and communicates over UART, so your host board needs a Grove port and a free serial interface.
What voltage does it need?
The module accepts an input of 3.3V to 5V.
Can I use an external antenna?
Yes. An MHF connector next to the onboard wire antenna lets you attach an external antenna with an MHF interface for more gain.
What is included in the package?
You receive one Grove LoRa Radio 433MHz module and one Grove cable.
How should I position the antenna?
Keep it vertical to the board and as straight as possible, and avoid large metal objects or metal caps near the antenna.

Overview

The Seeed Studio Grove LoRa Radio 433MHz is a plug-in wireless module that adds LoRa communication to Grove-based electronics. At its core sits the RFM95 transceiver, a LoRa long-range modem designed for spread-spectrum links with strong interference immunity and low current draw. An ATmega168 controller handles the module side, making it a self-contained radio block you can wire into a project with a single Grove cable.

Because it uses UART, the module talks to your host board over a standard serial connection. The board includes a simple wire antenna for receiving signals, and an MHF connector sits next to it so you can attach a second, external antenna when you need more signal gain.

Key Features

  • RFM95 LoRa transceiver for long-range, interference-resistant communication
  • 433MHz band operation for this version of the module
  • UART interface keeps integration straightforward
  • Dual antenna options with an onboard wire antenna and an MHF connector
  • +20dBm output capability for stronger transmission
  • Compact footprint at roughly 40 x 20 mm and 11 g

Specifications Explained

Frequency: the module operates at 433MHz, so both ends of your link must use matching 433MHz hardware. A separate 868MHz version exists for that band.

Power: the board accepts 3.3V to 5V, which covers the usual logic and supply levels found on Grove-ready development boards.

Current draw: expect around 28mA average during continuous +20dBm transmission, about 20mA average in receive mode at 500kHz bandwidth, and roughly 8.4mA average in standby. These figures help you plan power for remote or battery-backed nodes.

Environment: the rated operating temperature range is -20 to 70 degrees Celsius.

Mounting: two 2mm mounting holes let you fix the board securely inside an enclosure or on a carrier plate.

Compatibility and Requirements

The module connects through a Grove cable, so it pairs naturally with Seeed Studio Grove boards and shields that expose a Grove port. Communication happens over UART, meaning your host needs a free serial interface. Supply voltage must stay within the 3.3V to 5V range. If you add an external antenna, it must have an MHF interface.

Typical Uses

Use it for remote sensor nodes, long-distance data links between microcontrollers, IoT prototypes that need a wireless backhaul, and any Grove project where a serial radio link is more practical than Wi-Fi or Bluetooth.

Antenna Care

Keep the antenna vertical to the board and as straight as possible for the best performance. Avoid placing large metal objects close to the antenna, and skip metal enclosures or caps around the device if you can.

What's in the Box

  • 1 x Grove LoRa Radio 433MHz module
  • 1 x Grove cable

Quick specs

Model No. / Name
SeeedStudio Grove Modules
Operating Frequency (MHz)
433
Voltage Rating
3.3 to 5
Input Voltage (V)
5V/3.3V
Operating Temperature (°C)
-20 to 70°C
Communication Mode
UART
See all specifications