Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Seeed Studio, this lora module is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor Prototype Kit; power supply voltage (v) 5V; display 2.4 Inch. Check that your power source supplies 5V before connecting it.

Key Highlights

  • Item Type: Sensor Prototype Kit
  • Power Supply Voltage (V): 5V
  • Display: 2.4 Inch

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor Prototype Kit
Power Supply Voltage (V)5V
Display2.4 Inch
Storage CapacityMicro SD card slot
Main control (MCU)STM32WLE5JC (Cortex-M4)
Shipping Weight0.608 kg
Shipping Dimensions8.72 × 8.53 × 8.33 cm

Overview

The SeeedStudio SenseCAP K1100 - The Sensor Prototype Kit with LoRa and AI, made by Seeed Studio, is listed in our lora module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor Prototype Kit
  • Power Supply Voltage (V): 5V (match this to your power supply; too high a voltage can damage the part)
  • Display: 2.4 Inch (measured diagonally; compare with the space you have before ordering)
  • Storage Capacity: Micro SD card slot (space for firmware, files or media)
  • Main control (MCU): STM32WLE5JC (Cortex-M4) (look up this chip to confirm it runs the firmware or libraries you plan to use)
  • Shipping Weight: 0.608 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 8.72 × 8.53 × 8.33 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

SeeedStudio SenseCAP K1100  SenseCAP K1100 comes with all the essential sensors and devices, including a Wio Terminal, an AI Vision Sensor, and a LoRa-enabled module - that together allows users of all backgrounds and levels to create DIY sensors for data collection and solving real-world challenges. One of the most highlighted features of SenseCAP K1100 is a ready-to-use and always-on Grove-Vision AI Sensor for object detection. SenseCAP K1100 supports customized machine learning models for users to train on Wio Terminal and also allows users to directly import models from the others. In addition, the kit is fully supported by Edge Impulse to provide simple model training experiences for beginners.

Features:

  1. Deploy in 10 Minutes: Build an AIoT project through 3 steps in 10 minutes
  2. Advanced Technologies: Combination of Machine Learning, LoRa technology, and pre-trained embedded AI Vision Sensor
  3. Great Extensibility: Compatible with 400+ Grove sensors to support extensive applications and customization options
  4. Broad Integration: Compatible with mainstream platforms for Cloud support
  5. Open-source Platform: Compatible with beginner-friendly programming platforms enabling co-creation of IoT sensors
  6. Upgradable to Industrial Sensors: Gateway to the higher-end SenseCAP series of outdoor sensors for industrial usage
  7. Coverage: Up to 10 km
  8. Internet Backhaul Options: Wi-Fi, 4G, Ethernet
  9. Frequency Plans: Global LoRaWAN Frequency Support

Applications:

  1. Human Traffic Flow Detection: Monitor the data of human traffic flow using the AI Vision Sensor
  2. Indoor Air Quality Control: Detect various gas types and carbon dioxide in the air to monitor the atmospheric environment indoors
  3. Potted Plants Health Monitor: Monitor data of temperature, humidity, and soil moisture to maintain the optimal environment for the desktop potted plants

Package Includes:

1 x Wio Terminal

1 x Grove - Wio-E5

1 x Grove - VOC and eCO2 Gas Sensor SGP30

1 x Grove - Soil Moisture Sensor

1 x Grove - Temp&Humi Sensor(SHT40)

1 x Grove - Vision AI Module

4 x Grove - Cable

1 x Grove - 4 pin Male Jumper to Grove 4 pin Conversion Cable

1 x USB Cable - Type C

Quick specs

Item Type
Sensor Prototype Kit
Power Supply Voltage (V)
5V
Display
2.4 Inch
Storage Capacity
Micro SD card slot
Main control (MCU)
STM32WLE5JC (Cortex-M4)
Shipping Weight
0.608 kg
See all specifications