Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Seeed Studio, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: rated voltage (vdc) 5; resolution 480x480; wifi (y/n) wifi IEEE 802.11 b/g/n 2.4 GHz Bluetooth 5 (LE). Check that your power source supplies 5 before connecting it.

Key Highlights

  • Rated Voltage (VDC): 5
  • Resolution: 480x480
  • WiFi (Y/N): wifi IEEE 802.11 b/g/n 2.4 GHz Bluetooth 5 (LE)

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Rated Voltage (VDC)5
Resolution480x480
WiFi (Y/N)wifi IEEE 802.11 b/g/n 2.4 GHz Bluetooth 5 (LE)
Operating Temperature (°C)-10 - 50degree C
Operating humidity0 - 90%RH
Length (mm)96.2
Width (mm)92.2
Weight (g)231
Shipping Weight0.241 kg
Shipping Dimensions14 × 13 × 5 cm

Overview

The SenseCAP Indicator D1, 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040, made by Seeed Studio, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Rated Voltage (VDC): 5 (match this to your power supply; too high a voltage can damage the part)
  • Resolution: 480x480
  • WiFi (Y/N): wifi IEEE 802.11 b/g/n 2.4 GHz Bluetooth 5 (LE) (check your phone or controller supports the same Bluetooth version for full range)
  • Operating Temperature (°C): -10 - 50degree C
  • Operating humidity: 0 - 90%RH
  • Length (mm): 96.2 (measure your mounting space before ordering)
  • Width (mm): 92.2 (measure your mounting space before ordering)
  • Weight (g): 231 (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

SenseCAP Indicator D1 4-Inch Touch Screen IoT development platform powered by ESP32S3 & RP2040 driven by ESP32 and RP2040 dual-MCU and supports Wi-Fi/BLE communication. The board comes with a USB Type-C and two Grove interfaces, supports ADC and I2C transmission protocols, and can easily connect to other peripherals with rich GPIOs. SenseCAP Indicator is a fully open-source powerful IoT development platform for developers. Native firmware enables you to use it as a desktop air quality detector or you could customize one of your own styles. There are built-in tVOCs and CO2 sensors, and a Grove TH sensor is provided to connect externally to reduce heat interference to get more accurate temperature and humidity results.

Features:

  1. Dual MCUs and Rich GPIOs
  2. Real-time Air Quality Monitoring
  3. Fully Open Source Platform

Package Includes:

1 x Sense CAP Indicator

1 x USB-C Cable (1M)

Quick specs

Rated Voltage (VDC)
5
Resolution
480x480
WiFi (Y/N)
wifi IEEE 802.11 b/g/n 2.4 GHz Bluetooth 5 (LE)
Operating Temperature (°C)
-10 - 50degree C
Operating humidity
0 - 90%RH
Length (mm)
96.2
See all specifications