Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A complete ATSAMD51 development system with a 2.4-inch LCD, dual-band Wi-Fi, BLE 5.0 and onboard sensors in a finished enclosure. Grove ports and Raspberry Pi-compatible GPIO make it easy to expand without extra hardware.

Key Highlights

  • ATSAMD51 ARM Cortex-M4F core at 120MHz, boostable to 200MHz
  • 2.4-inch 320x240 LCD with ILI9341 driver IC
  • Realtek RTL8720DN Wi-Fi 802.11 a/b/g/n and BLE 5.0
  • Onboard IMU, microphone, buzzer, light sensor and IR emitter
  • Two Grove ports plus 40-pin Raspberry Pi-compatible GPIO
  • USB Type-C with OTG support and microSD slot up to 16GB

Ideal For

  • Makers building IoT sensor nodes with a built-in display
  • Students learning Arduino or MicroPython on integrated hardware
  • Engineers prototyping handheld instruments and dashboards
  • Developers exploring edge computing with Raspberry Pi
  • Educators who need a tidy, enclosure-ready teaching board

Buying Tip

Confirm whether you need a Grove cable or USB-C cable separately, since the listed data does not specify included accessories.

Elecvora expert review

Our verdict

The Wio Terminal packs a display, wireless, sensors and expansion into one finished unit, which saves a lot of assembly time on display-driven IoT projects. It is a sensible choice when you want a presentable prototype without designing an enclosure from scratch.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Screen, wireless and sensors integrated on one board
  • Grove ports and Raspberry Pi-compatible GPIO for expansion
  • Finished enclosure with magnets and mounting holes
  • Works with both Arduino and MicroPython

Cons

  • microSD support is limited to 16GB
  • No battery or charging circuit is specified in the data
  • Wireless setup depends on the RTL8720DN firmware workflow

Best for

Makers and engineers building display-based IoT and handheld projects

Not ideal for

Projects that need a battery-powered, cable-free design out of the box

Specifications

Item TypeDevelopment Board
Main ChipMaximum Speed: 200MHz External Flash: 4MBytes Operating Temperature: -40°C ~ 85°C (TA) Resolution: 320x240
Wireless ConnectivityWi-Fi: 802.11 a/b/g/n 1x1, 2.4GHz & 5GHz Bluetooth: Support BLE5.0 Accelerometer: LIS3DHTR Microphone: 1.0V-10V -42dB
Additional Specs.Speaker: ≥78dB @10cm 4000Hz Light Sensor: 400-1050nm Infrared Emitter: 940nm MicroSD Card Slot: Maximum 16GB GPIO: 40-PIN (Raspberry Pi Compatible)
LCD ScreenDisplay Size: 2.4inch Drive IC: ILI9341
InterfaceFPC: 20-Pins USB Type-C: Power & USB-OTG
Overall Dimension72mm*57mm*12mm
Shipping Weight0.13 kg
Shipping Dimensions10 × 6 × 2 cm

Frequently Asked Questions

What can I program the Wio Terminal with?
It supports Arduino and MicroPython. The ATSAMD51 core runs at 120MHz with a boost to 200MHz, and 4MB of external flash is available.
Does it have Wi-Fi and Bluetooth?
Yes. The Realtek RTL8720DN provides 802.11 a/b/g/n Wi-Fi on 2.4GHz and 5GHz bands plus Bluetooth LE 5.0.
How is the board powered?
Power is supplied through the USB Type-C port, which also supports USB-OTG. The 40-pin header on the back can supply power when USB host or client functions are used.
What sensors are built in?
It includes an LIS3DHTR accelerometer, a microphone, a light sensor covering 400-1050nm, a 940nm infrared emitter and a speaker rated at 78dB or higher at 10cm.
What size microSD card can I use?
The microSD card slot supports cards up to 16GB, which is enough for logging sensor readings and storing data files.
What comes in the box?
Package contents are not confirmed in the product data, so verify the included accessories with the listing before purchase.

Overview

The Seeed Studio Wio Terminal is a self-contained development system rather than a bare microcontroller. It pairs a Microchip ATSAMD51P19 ARM Cortex-M4F core with a 2.4-inch LCD, Realtek RTL8720DN wireless connectivity and a set of onboard sensors, all mounted in a designed enclosure. For anyone who has built a project on a breadboard and then struggled to turn it into something presentable, the Wio Terminal shortens that gap considerably.

The board runs at 120MHz with a boost to 200MHz and includes 4MB of external flash alongside 192KB of RAM. The display offers 320x240 resolution, so live readings, menus and simple interfaces can be shown without adding a separate screen module.

Key Features

  • Integrated sensing: LIS3DHTR accelerometer, microphone, light sensor (400-1050nm) and 940nm infrared emitter are already on the board.
  • Audio feedback: an onboard speaker rated at 78dB or higher at 10cm and 4000Hz.
  • Wireless: dual-band 2.4GHz and 5GHz Wi-Fi plus Bluetooth LE 5.0 through the RTL8720DN.
  • Controls: configurable buttons and a 5-way switch for menu navigation.
  • Expansion: two Grove ports, a 40-pin Raspberry Pi-compatible GPIO header, a 20-pin FPC connector and USB Type-C.
  • Mounting: the enclosure includes built-in magnets and two mounting holes.

Specifications Explained

The 200MHz maximum clock speed and 4MB external flash give enough headroom for graphics, buffered sensor data and moderate wireless workloads. The 320x240 LCD is driven by an ILI9341 controller, a well-known part that keeps display code straightforward. Dual-band Wi-Fi matters in crowded 2.4GHz environments, and BLE 5.0 supports low-power links to phones and peripherals. The 40-pin header follows Raspberry Pi layout, so many existing HATs and accessories can be considered. A microSD slot accepting up to 16GB is useful for logging readings over time. Operating temperature is rated from -40°C to 85°C.

Compatibility and Requirements

The Wio Terminal works with Arduino and MicroPython. USB Type-C handles power and USB-OTG, and the 40-pin header on the back can supply power when USB host or client functions are in use. As a USB host it can read data from mice, keyboards, MIDI devices, game controllers and 3D printers; as a USB client it can emulate a mouse, keyboard or MIDI device on a host PC. Supported protocols include SPI, I2C, I2S, ADC, DAC, PWM and UART.

Typical Uses

  • IoT sensor nodes that publish readings over Wi-Fi
  • Handheld instruments with an on-screen interface
  • Edge computing experiments paired with a Raspberry Pi
  • Data logging to microSD with the onboard sensors
  • Teaching and prototyping with Arduino or MicroPython

What's in the Box

Package contents are not confirmed in the available product data, so check the listing details before ordering.

Wio Terminal: ATSAMD51 Core with Realtek RTL8720DN BLE 5.0 & Wi-Fi 2.4G/5G Dev Board

Quick specs

Item Type
Development Board
Main Chip
Maximum Speed: 200MHz External Flash: 4MBytes Operating Temperature: -40°C ~ 85°C (TA) Resolution: 320x240
Wireless Connectivity
Wi-Fi: 802.11 a/b/g/n 1x1, 2.4GHz & 5GHz Bluetooth: Support BLE5.0 Accelerometer: LIS3DHTR Microphone: 1.0V-10V -42dB
Additional Specs.
Speaker: ≥78dB @10cm 4000Hz Light Sensor: 400-1050nm Infrared Emitter: 940nm MicroSD Card Slot: Maximum 16GB GPIO: 40-PIN (Raspberry Pi Compatible)
LCD Screen
Display Size: 2.4inch Drive IC: ILI9341
Interface
FPC: 20-Pins USB Type-C: Power & USB-OTG
See all specifications