
1 / 3 · Click to enlarge
At a glance
Made by Seeed Studio, this lora module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Other Boards & Modules; operating frequency (mhz) 868; processor STMicro STM3L412 Arm Cortex-M4 microcontroller @ 80 MHz with 40KB RAM, 64 or 128KB flash.
Key Highlights
- Model No. / Name: Other Boards & Modules
- Operating Frequency (MHz): 868
- Processor: STMicro STM3L412 Arm Cortex-M4 microcontroller @ 80 MHz with 40KB RAM, 64 or 128KB flash
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Other Boards & Modules |
|---|---|
| Operating Frequency (MHz) | 868 |
| Processor | STMicro STM3L412 Arm Cortex-M4 microcontroller @ 80 MHz with 40KB RAM, 64 or 128KB flash |
| Transceiver | Semtech SX1302 LoRa with 2x SX1250 Tx/Rx front-ends |
| Transmit Power (dBm) | Up to 26dBm @ 3.3V |
| Receiver Type | Down to -139dBm @ SF12, BW 125 kHz; -125dBm @ 125K/SF7 |
| No. of Bands | EU868, AS923, AS920, AU915, KR920, and IN865, u.FL antenna connector |
| SPI version | Standby: 7.5 mA; Tx up to 415 mA; Rx: 40 mA |
| USB version | Standby: 20 mA; Tx up to 425 mA; Rx: 53 mA |
| Interface | SPI or USB interface on 52-pin mPCIe edge connector |
| Shipping Weight | 0.007 kg |
| Shipping Dimensions | 10 × 6 × 1 cm |
Overview
The WM1302 LoRaWAN Gateway Module (SPI) - EU868, based on LoRa Concentrator Semtech SX1302, made by Seeed Studio, is listed in our lora module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Other Boards & Modules (your supply must deliver at least this much current)
- Operating Frequency (MHz): 868 (make sure the rest of your system works at this frequency)
- Processor: STMicro STM3L412 Arm Cortex-M4 microcontroller @ 80 MHz with 40KB RAM, 64 or 128KB flash (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Transceiver: Semtech SX1302 LoRa with 2x SX1250 Tx/Rx front-ends
- Transmit Power (dBm): Up to 26dBm @ 3.3V
- Receiver Type: Down to -139dBm @ SF12, BW 125 kHz; -125dBm @ 125K/SF7 (make sure the rest of your system works at this frequency)
- No. of Bands: EU868, AS923, AS920, AU915, KR920, and IN865, u.FL antenna connector (confirm your cable or board uses the same connector)
- SPI version: Standby: 7.5 mA; Tx up to 415 mA; Rx: 40 mA
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Semtech SX1302 LoRa Transceiver with 2x SX1250 Tx/Rx front-ends
- Tx power – Up to 26dBm @ 3.3V
- Rx sensitivity – Down to -139dBm @ SF12, BW 125 kHz; -125dBm @ 125K/SF7
- LoRaWAN 1.0.2 compatible.
- LoRa band coverage – EU868, AS923, AS920, AU915, KR920, and IN865.
Package Includes:
1 x WM1302 LoRaWAN Gateway Module (SPI) - EU868, based on LoRa Concentrator Semtech SX1302Quick specs
- Model No. / Name
- Other Boards & Modules
- Operating Frequency (MHz)
- 868
- Processor
- STMicro STM3L412 Arm Cortex-M4 microcontroller @ 80 MHz with 40KB RAM, 64 or 128KB flash
- Transceiver
- Semtech SX1302 LoRa with 2x SX1250 Tx/Rx front-ends
- Transmit Power (dBm)
- Up to 26dBm @ 3.3V
- Receiver Type
- Down to -139dBm @ SF12, BW 125 kHz; -125dBm @ 125K/SF7



















