Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact ESP32-C5 dev board with dual-band Wi-Fi 6, Bluetooth 5 LE, Zigbee/Thread support, 8MB Flash, and 8MB PSRAM. Pre-soldered headers and a U.FL antenna connector make it ready for rapid IoT prototyping.

Key Highlights

  • ESP32-C5HR8 RISC-V processor up to 240 MHz
  • Dual-band Wi-Fi 6 (2.4 GHz and 5 GHz)
  • Bluetooth 5 Low Energy and IEEE 802.15.4
  • 8MB Flash and 8MB PSRAM onboard
  • 11 GPIO pins with ADC, I2C, SPI, UART, PWM, JTAG
  • Pre-soldered headers and U.FL antenna connector

Ideal For

  • IoT developers building smart home devices
  • Engineers prototyping wireless sensor nodes
  • Makers working on connected embedded systems
  • Product designers needing dual-band Wi-Fi in a compact form factor
  • Educators teaching IoT and wireless networking

Buying Tip

Check that your development environment supports the ESP32-C5 chip before purchasing, as toolchain support may vary.

Elecvora expert review

Our verdict

The Seeed Studio XIAO ESP32-C5 packs dual-band Wi-Fi 6, Bluetooth 5 LE, and Zigbee/Thread support into a tiny pre-soldered board with generous memory. It is a strong choice for developers who need advanced wireless connectivity in a compact form factor.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual-band Wi-Fi 6 for flexible and fast wireless connectivity
  • 8MB Flash and 8MB PSRAM provide ample memory
  • Pre-soldered headers and castellated edges simplify prototyping and production
  • U.FL connector allows external antenna for extended range
  • Onboard lithium battery charging support

Cons

  • Requires a separate Li-ion/LiPo battery for portable use
  • External antenna not included
  • Software support for Zigbee/Thread depends on the stack

Best for

IoT developers needing dual-band Wi-Fi and multi-protocol wireless in a compact board

Not ideal for

Beginners who need extensive documentation and community examples for the ESP32-C5

Specifications

Shipping Weight0.020 kg
Shipping Dimensions6 × 4 × 2 cm

Frequently Asked Questions

What is the processor speed of the XIAO ESP32-C5?
It uses a 32-bit RISC-V single-core processor running up to 240 MHz.
Does the board support 5 GHz Wi-Fi?
Yes, it supports dual-band Wi-Fi 6 on both 2.4 GHz and 5 GHz bands.
Can I connect an external antenna?
Yes, there is a U.FL connector for an external antenna. An onboard 2.4 GHz FPC antenna is also included.
Is a battery included?
No, a battery is not included. The board has onboard charging support for Li-ion/LiPo batteries.
What programming interface does it use?
It has a USB Type-C interface for power and programming.
Does it support Zigbee and Thread?
The hardware supports IEEE 802.15.4, but protocol support depends on the software stack you use.

Overview

The Seeed Studio XIAO ESP32-C5 is a pre-soldered development board designed for modern IoT and wireless applications. At its core is the ESP32-C5HR8 chip, featuring a 32-bit RISC-V single-core processor that runs up to 240 MHz. The board supports dual-band Wi-Fi 6 (2.4 GHz and 5 GHz), Bluetooth 5 Low Energy, and IEEE 802.15.4 for Zigbee and Thread, giving you flexible connectivity options for connected projects. With 8MB Flash and 8MB PSRAM, there is enough memory for wireless stacks and embedded applications. The compact XIAO form factor includes castellated edges for surface-mount assembly, and the pre-soldered headers let you start prototyping immediately.

Key Features

  • ESP32-C5HR8 processor: 32-bit RISC-V single-core up to 240 MHz with a low-power RISC-V core.
  • Dual-band Wi-Fi 6: Supports 802.11ax on both 2.4 GHz and 5 GHz bands for improved throughput and reduced congestion.
  • Bluetooth 5 Low Energy: Enables low-power wireless connections for peripherals and beacons.
  • IEEE 802.15.4: Hardware support for Zigbee and Thread (protocol support depends on software stack).
  • Memory: 8MB Flash and 8MB PSRAM for embedded applications.
  • GPIO and interfaces: 11 GPIO pins, 1 analog pin plus 4 analog pads on the reverse side, 1x I2C, 1x UART, 1x SPI, and 1x JTAG pads.
  • Antenna options: Onboard 2.4 GHz FPC antenna (2.9 dBi) and U.FL connector for external antenna.
  • Power and charging: USB Type-C for power and programming, plus onboard lithium battery charging support.

Specifications Explained

The ESP32-C5HR8 processor delivers ample performance for wireless networking and control tasks. The dual-band Wi-Fi 6 support means you can use the less crowded 5 GHz band for higher throughput or the 2.4 GHz band for better range. Bluetooth 5 Low Energy and IEEE 802.15.4 open up options for connecting sensors, wearables, and smart home devices. The 8MB Flash and 8MB PSRAM provide headroom for firmware and data buffering, while the 11 GPIO pins with ADC, I2C, SPI, UART, and PWM cover common peripherals. The U.FL connector lets you attach an external antenna if you need better signal strength, and the onboard charging circuit simplifies battery-powered designs.

Compatibility and Requirements

The board is compatible with standard development environments that support the ESP32-C5, such as Espressif's IoT Development Framework. It requires a USB Type-C cable for power and programming. For battery operation, a Li-ion or LiPo battery with the correct connector is needed (not included). An external antenna can be connected via the U.FL connector if required. The castellated edges make it suitable for SMT/PCBA production workflows.

Typical Uses

  • Smart home devices and automation systems
  • Wireless sensor nodes and networks
  • Industrial monitoring and connected embedded systems
  • Prototyping IoT products with dual-band Wi-Fi
  • Battery-powered applications with low-power requirements

What's in the Box

Package contents are not specified. Please check the product listing for details.

Quick specs

Shipping Weight
0.020 kg
Shipping Dimensions
6 × 4 × 2 cm
See all specifications