
1 / 4 · Click to enlarge
At a glance
Made by Seeed Studio, this iot development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; model no. / name MG24; processor type Arm Cortex-M33.
Key Highlights
- Item Type: Development Board
- Model No. / Name: MG24
- Processor Type: Arm Cortex-M33
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Development Board |
|---|---|
| Model No. / Name | MG24 |
| RAM | 256 kB |
| Processor Type | Arm Cortex-M33 |
| Microcontroller | Silicon Labs EFR32MG24 |
| Storage Capacity | 1536 kB internal Flash, 4 MB external Flash |
| Length (mm) | 21 |
| Width (mm) | 17.8 |
| Weight (g) | 05 |
| Shipping Weight | 0.006 kg |
| Shipping Dimensions | 5 × 5 × 3 cm |
Overview
The Seeed Studio XIAO MG24 Sense Development Board(Pre-Soldered) - Silicon Labs EFR32MG24, Matter Native over Thread/BLE 5.3, Arduino Compatible, made by Seeed Studio, is listed in our iot development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Development Board
- Model No. / Name: MG24
- RAM: 256 kB (more memory leaves room for larger programs and buffers)
- Processor Type: Arm Cortex-M33 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Microcontroller: Silicon Labs EFR32MG24 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Storage Capacity: 1536 kB internal Flash, 4 MB external Flash (space for firmware, files or media)
- Length (mm): 21 (measure your mounting space before ordering)
- Width (mm): 17.8 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Seeed Studio XIAO MG24 Sense (Pre-Soldered) is a compact, ultra-low-power MCU development board powered by Silicon Labs’ EFR32MG24 SoC. Development Board is featuring native Matter® protocol support over Thread and BLE 5.3, it is ideal for smart home and IoT applications. With onboard analog microphone and 6-axis IMU, it supports TinyML, edge AI, and gesture recognition.
Its 4MB Flash, 19 GPIOs, integrated antenna, and USB-C interface make it powerful yet compact at just 21x17.8mm. This pre-soldered version enables rapid prototyping for wearables, automation, and embedded projects, and remains compatible with Arduino IDE and the extensive XIAO accessory ecosystem.
Features:
- High-Performance MCU: 32-bit ARM Cortex-M33 @ 78MHz
- Native Matter® Support: Thread & BLE 5.3 compatible
- Ultra-Low Power: Sleep current as low as 1.95μA
- Onboard Sensors: 6-axis IMU + analog microphone
- Rich Connectivity: 19 GPIOs, UART, SPI, I²C, all PWM
- 4MB Additional Flash: External onboard storage
- Pre-Soldered & Compact: Thumb-size 21 x 17.8mm
- Security Engine: Secure Boot, TrustZone®, RNG & Crypto acceleration
Applications:
- Smart Home Devices: Using Matter® for devices like smart locks, sensors, and lighting.
- Remote Controls: Low-power remotes for home automation systems
- TinyML Applications: On-device machine learning for gesture recognition and voice commands.
- Environmental Monitoring: Battery-powered sensors for temperature, humidity, and air quality.
Package Includes:
1 x Seeed Studio XIAO MG24 Sense (Pre-Soldered)
Quick specs
- Item Type
- Development Board
- Model No. / Name
- MG24
- RAM
- 256 kB
- Processor Type
- Arm Cortex-M33
- Microcontroller
- Silicon Labs EFR32MG24
- Storage Capacity
- 1536 kB internal Flash, 4 MB external Flash




















