Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SEGGER, this pic programmers and debuggers is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name SEGGER J-LINK BASE CLASSIC; operating temperature (°c) +5 to +60; humidity range Max. 90% rH (non-condensing). Check that your power source supplies 4.5 to 5 before connecting it.

Key Highlights

  • Model No. / Name: SEGGER J-LINK BASE CLASSIC
  • Operating Temperature (°C): +5 to +60
  • Humidity Range: Max. 90% rH (non-condensing)

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameSEGGER J-LINK BASE CLASSIC
Operating Temperature (°C)+5 to +60
Humidity RangeMax. 90% rH (non-condensing)
Supply Voltage4.5 to 5
Shipping Weight0.235 kg
Shipping Dimensions23 × 17 × 5 cm

Overview

The SEGGER 8.08.00 J-LINK BASE CLASSIC Debugger, ST-LINK/V2 In-Circuit Debugger/Programmer, STM8 and STM32 MCU Family Support, made by SEGGER, is listed in our pic programmers and debuggers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: SEGGER J-LINK BASE CLASSIC
  • Operating Temperature (°C): +5 to +60
  • Humidity Range: Max. 90% rH (non-condensing) (quoted range is usually line-of-sight; walls and interference shorten it)
  • Supply Voltage: 4.5 to 5 (match this to your power supply; too high a voltage can damage the part)
  • Shipping Weight: 0.235 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 23 × 17 × 5 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SEGGER J-LINK 8.08.00 is a USB powered JTAG emulator supporting a large number of CPU cores. It is based on a 32-bit RISC CPU, it can communicate at high speed with the supported target CPUs. J-Link is used around the world in tens of thousands of places for development and production (flash programming) purposes. It is supported by all major IDEs such as IAR EWARM, Keil MDK, Rowley CrossWorks, Atollic TrueSTUDIO, IAR EWRX, Renesas HEW, Renesas e2studio, and many others. Including all models, more than 100, 000 J-Links have been sold so far, making J-Link probably the most popular emulator for ARM cores and the de facto standard.

The SEGGER J-LINK BASE CLASSIC Debugger and ST-LINK/V2 In-Circuit Debugger/Programmer are essential tools for embedded system development, offering support for STM8 and STM32 microcontrollers. These tools are widely used for debugging, programming, and evaluating embedded applications with various microcontroller families.

SEGGER J-LINK BASE CLASSIC Debugger:

The SEGGER J-LINK BASE CLASSIC is a powerful and cost-effective debugging tool designed for developers working with ARM-based microcontrollers, including STM32 and STM8. It enables fast, reliable, and efficient debugging of embedded applications, offering several advantages in terms of speed, compatibility, and features.

Note: Refer to the datasheet in the ATTACHMENTS section for more info. regd. the product.


Features:

  1. High-Speed Debugging: SEGGER J-LINK provides high-speed debugging via the SWD (Serial Wire Debug) and JTAG interfaces, allowing developers to work efficiently with ARM-based microcontrollers.
  2. Support for ARM Cortex-M Processors: It supports ARM Cortex-M processors, which include the STM32 (Cortex-M0, M3, M4, and M7) and STM8 (8-bit MCUs) families.
  3. Flash Programming: The SEGGER J-LINK allows for programming the flash memory of microcontrollers, providing a straightforward interface for uploading and updating firmware.
  4. Cross-platform Compatibility: It is compatible with popular IDEs such as Keil MDK, IAR Embedded Workbench, GCC, and Segger Embedded Studio.
  5. Real-Time Debugging: With SEGGER J-LINK, developers can perform real-time debugging, stepping through code, setting breakpoints, and inspecting variables during execution.
  6. SEGGER J-LINK 8.08.00 J-LINK BASE CLASSIC Debugger, ST-LINK/V2 In-Circuit Debugger/Programmer, STM8 and STM32 MCU Family Support
  7. Direct download into flash memory of most popular microcontrollers supported
  8. Download speed up to 1MByte/second
  9. Supports unlimited breakpoints in flash memory
  10. Free software updates, 1 year of support
  11. Supports concurrent access to CPU by multiple applications
  12. Fully plug-and-play compatible
  13. Target power supply: J-Link can supply up to 300mA to target with overload protection
  14. The remote server included, allows using J-Link remotely via TCP/IP
  15. Supports JTAG chains with multiple devices
  16. RDI interface DLL available

Package Includes:

1 x SEGGER J-LINK BASE CLASSIC Debugger

1 x USB Cable for Connection

1 x 20-pin JTAG Connector

Quick specs

Model No. / Name
SEGGER J-LINK BASE CLASSIC
Operating Temperature (°C)
+5 to +60
Humidity Range
Max. 90% rH (non-condensing)
Supply Voltage
4.5 to 5
Shipping Weight
0.235 kg
Shipping Dimensions
23 × 17 × 5 cm
See all specifications