Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SENSIRION, this pressure sensors is a good fit for makers, students and electronics hobbyists. Main specs: pressure type Differential; sensor type CMOSens MEMS digital differential pressure sensor; supply voltage 5.5 V. Check that your power source supplies 5.5 V before connecting it.

Key Highlights

  • Pressure Type: Differential
  • Sensor Type: CMOSens MEMS digital differential pressure sensor
  • Supply Voltage: 5.5 V

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Pressure TypeDifferential
Pressure Range125 Pa
Sensor TypeCMOSens MEMS digital differential pressure sensor
Supply Voltage5.5 V
Accuracy+/-3%
ApplicationHVAC and medical and cleanroom and filter monitoring
Output TypeDigital
Weight (Kg)0.008 kg
Shipping Weight0.01 kg
Shipping Dimensions10 × 7 × 3 cm

Overview

The SENSIRION Pressure Sensor-SDP810-125PA, 125 Pa, Digital, Differential, 5.5 V, Tube, 3.8 mA, made by SENSIRION, is listed in our pressure sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Pressure Type: Differential
  • Pressure Range: 125 Pa (quoted range is usually line-of-sight; walls and interference shorten it)
  • Sensor Type: CMOSens MEMS digital differential pressure sensor
  • Supply Voltage: 5.5 V (match this to your power supply; too high a voltage can damage the part)
  • Accuracy: +/-3%
  • Application: HVAC and medical and cleanroom and filter monitoring
  • Output Type: Digital
  • Weight (Kg): 0.008 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SDP810-125PA from Sensirion is a digital differential pressure sensor with tube connection. It is designed for high volume applications. The sensor measures pressure of air and non-aggressive gases with superb accuracy and no offset drift. It delivers outstanding accuracy at bottom end of measuring range. The SDP800 features a digital 2-wire interface which makes it easy to connect directly to a microprocessor. The outstanding performance of this sensor is based on Sensirion’s patented CMOSens sensor technology which combines sensor element, signal processing and digital calibration on small CMOS chip. The differential pressure is measured by a thermal sensor element using flow through technology. The well proven CMOS technology is suitable for high quality mass production and it is ideal choice for demanding & cost sensitive OEM applications. It is also in HVAC, gas boilers, pellet stoves and fuel cells, filter monitoring, VAV control, heat recovery.

Applications:

  1. Sensing & Instrumentation
  2. Medical

Features:

  1. Excellent accuracy & repeatability, no drift, no offset, hysteresis free
  2. Extended feature set, smart averaging, outstanding accuracy and long term stability
  3. Calibrated temperature range from -20°C to 85°C, measurement time from 40ms to 50ms
  4. High reliability, best signal to noise ratio, 3ms flow step response time, 16bit resolution
  5. 25ms power-up time, 2ms soft reset time, 400KHz I2C SCL frequency, 0.5ms measurement speed
  6. 3V to 5.5V supply voltage, 3.8mA (measuring), 1.1mA (idle state), 1uA (sleep mode) supply current
  7. Measurement range from -125Pa to 125Pa (-0.5 to 0.5inch H2O), calibrated for air, N2
  8. 0.08Pa zero point accuracy, 3% of reading span accuracy, 0.04Pa zero point repeatability
  9. 0.5% of reading span repeatability, less than 0.05Pa/year offset stability
  10. Less than 0.5% of reading per 10°C span shift due to temperature variation

Package Includes:

1 x SENSIRION Pressure Sensor-SDP810-125PA, 125 Pa, Digital, Differential, 5.5 V, Tube, 3.8 mA

Quick specs

Pressure Type
Differential
Pressure Range
125 Pa
Sensor Type
CMOSens MEMS digital differential pressure sensor
Supply Voltage
5.5 V
Accuracy
+/-3%
Application
HVAC and medical and cleanroom and filter monitoring
See all specifications