Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SENSIRION, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Pressure Sensor; sensor type Pressure Sensor; model no. / name SDP32-125PA. Check that your power source supplies 3.3 before connecting it.

Key Highlights

  • Item Type: Pressure Sensor
  • Sensor Type: Pressure Sensor
  • Model No. / Name: SDP32-125PA

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypePressure Sensor
Sensor TypePressure Sensor
Model No. / NameSDP32-125PA
Operating Voltage (V)3.3
Current consumption5.5
Measurement Range-40 °C to +85 °C
Flow Range± 250 slm
Response Time (mS)0.5
Resolution16 Bits
Accuracy-40 °C to +85 °C
InterfaceDigital 2-wire interface
Repeatability0.1°C
Frequency400 kHz
Length (mm)82
Width (mm)34.4
Weight (g)<6
Shipping Weight0.5 kg
Shipping Dimensions9 × 7 × 2 cm

Overview

The Sensirion SDP32-125PA Pressure Sensor ±125 Pa, I2C, 250pcs Tape Reel, made by SENSIRION, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Pressure Sensor
  • Sensor Type: Pressure Sensor
  • Model No. / Name: SDP32-125PA
  • Operating Voltage (V): 3.3 (match this to your power supply; too high a voltage can damage the part)
  • Current consumption: 5.5 (your supply must deliver at least this much current)
  • Measurement Range: -40 °C to +85 °C (quoted range is usually line-of-sight; walls and interference shorten it)
  • Flow Range: ± 250 slm (quoted range is usually line-of-sight; walls and interference shorten it)
  • Response Time (mS): 0.5

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Sensirion SDP32-125PA Pressure Sensor ±125 Pa, I2C, 250pcs Tape Reelis a highly accurate digital differential pressure sensor featuring built-in temperature compensation for both pressure and mass flow measurements. It ensures precise performance across a wide range of environmental conditions without requiring absolute pressure compensation. Designed for air, N₂, and O₂, it offers ultra-fast response, excellent long-term stability, and low power consumption, making it ideal for applications where accuracy, responsiveness, and energy efficiency are critical. Note: Refer to datasheet in the ATTACHMENTS section for more info. regd. the product.

Features:

  1. Ultra-low pressure range: ±125 Pa
  2. Digital I2C interface with selectable addresses
  3. Continuous and triggered measurement modes
  4. 16-bit resolution for pressure and temperature
  5. Temperature range: -40 °C to +85 °C
  6. Compact QFN package with minimal footprint
  7. Fully calibrated and temperature-compensated
  8. High update rate: up to 2.2 kHz for pressure

Applications:
  1. Medical
  2. HVAC
  3.  Automotive
  4.  Process automation
  5. Burner control

Package Includes:

1 x Sensirion SDP32-125PA Pressure Sensor ±125 Pa, I2C, 250pcs Tape Reel

Quick specs

Item Type
Pressure Sensor
Sensor Type
Pressure Sensor
Model No. / Name
SDP32-125PA
Operating Voltage (V)
3.3
Current consumption
5.5
Measurement Range
-40 °C to +85 °C
See all specifications