
1 / 2 · Click to enlarge
At a glance
Made by SENSIRION, this gas sensors is a good fit for makers, students and electronics hobbyists. Main specs: item type Gas Concentration Sensor; sensor type Gas Concentration Sensor; model no. / name STC31-R3. Check that your power source supplies 3.3 before connecting it.
Key Highlights
- Item Type: Gas Concentration Sensor
- Sensor Type: Gas Concentration Sensor
- Model No. / Name: STC31-R3
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Gas Concentration Sensor |
|---|---|
| Sensor Type | Gas Concentration Sensor |
| Model No. / Name | STC31-R3 |
| Operating Voltage (V) | 3.3 |
| Current consumption | 03 |
| Operating Temperature (°C) | -20 to +85 °C |
| Response Time (mS) | 0.5 |
| Interface | Digital 2-wire interface |
| Length (mm) | 82 |
| Width (mm) | 34.4 |
| Weight (g) | 25 |
| Measurement Range | 500 to + 500 Pa |
| Resolution | 16 Bits |
| Accuracy | 0.5 °C (10 °C to 50 °C) |
| Input current (mA) | ±70 |
| Shipping Weight | 0.04 kg |
| Shipping Dimensions | 9 × 7 × 2 cm |
Overview
The Sensirion STC31-R3 Gas Concentration Sensor 0-100%, I2C Output, made by SENSIRION, is listed in our gas sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Gas Concentration Sensor
- Sensor Type: Gas Concentration Sensor
- Model No. / Name: STC31-R3
- Operating Voltage (V): 3.3 (match this to your power supply; too high a voltage can damage the part)
- Current consumption: 03 (your supply must deliver at least this much current)
- Operating Temperature (°C): -20 to +85 °C
- Response Time (mS): 0.5
- Interface: Digital 2-wire interface (confirm your cable or board uses the same connector)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Wide CO₂ Measurement Range: 0–100% volume concentration
- 16-bit Digital Resolution for both gas and temperature readings
- High Accuracy: ±0.5–1 vol% + 3% of measured value
- Built-in Temperature Sensor: Accurate from –20 °C to +85 °C
- Flexible Calibration Modes: Supports forced and automatic self-calibration
- I²C Digital Interface: Fast-mode Plus compatible with CRC protection
- Low Power Mode: Sleep mode with data retention
- Configurable Gas Models: Supports CO₂ in air or nitrogen
Package Includes:
1 x Sensirion STC31-R3 Gas Concentration Sensor 0-100%, I2C OutputQuick specs
- Item Type
- Gas Concentration Sensor
- Sensor Type
- Gas Concentration Sensor
- Model No. / Name
- STC31-R3
- Operating Voltage (V)
- 3.3
- Current consumption
- 03
- Operating Temperature (°C)
- -20 to +85 °C



















