
1 / 3 · Click to enlarge
AI Summary
A compact SG3525 + LM358 control board for inverter and MOSFET driver builds, offering 12V to 24V output at up to 1A. Its built-in 5.1V ±1% reference and protection features simplify the surrounding circuit.
Key Highlights
- SG3525 and LM358 combination for inverter control and signal conditioning
- Output voltage range of 12V to 24V for flexible supply designs
- Driver current up to 1A, capable of driving up to twenty 3205 MOSFETs
- Adjustable frequency for tuning switching behaviour to the application
- Overcurrent, short circuit and self-locking turn-off protection
- On-chip 5.1V reference trimmed to ±1%, no external resistors needed
Ideal For
- Hobbyists building low-voltage power inverters
- Technicians prototyping regulated switching supplies
- Makers driving banks of 3205 MOSFETs
- Electronics students studying PWM control circuits
- Bench builders replacing discrete SG3525 control stages
Buying Tip
Check that your planned power stage and MOSFET count stay within the 1A driver current and 12V to 24V output range before ordering.
Elecvora expert review
Our verdict
A tidy, low-cost control board that packages the SG3525 and LM358 with useful protection into a small module. It suits builders who already understand inverter topologies and want to skip the discrete control wiring.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Integrated 5.1V ±1% reference saves external components
- Overcurrent, short circuit and self-locking turn-off protection
- Adjustable frequency and output regulation
- Up to 1A drive for multi-MOSFET stages
Cons
- No package contents specified
- Power stage and enclosure not included
- Requires electronics assembly skills to use safely
Best for
Inverter and switching supply prototyping
Not ideal for
Plug-and-play users with no soldering or electronics experience
Specifications
| Item Type | Driver Board |
|---|---|
| Output Voltage | 12V to 24V |
| Driver Current (A) | Up to 1A |
| Output Logical Signal | NOR logic output stage |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 10 × 6 × 2 cm |
Frequently Asked Questions
What is the SG3525 + LM358 board used for?
What output voltage does it support?
How much current can it drive?
Does it need external reference resistors?
What happens during a fault?
What is included with the board?
Overview
The SG3525 + LM358 Inverter Drive Board is a compact blue control module built around two well-known ICs: the SG3525 pulse-width modulation controller and the LM358 dual operational amplifier. Together they form the control and signal stage of a switching power supply or inverter, handling frequency setting, output regulation and fault protection on a single small board.
The board is intended for builders who want a ready-made driver stage instead of wiring the same discrete circuit by hand. It outputs between 12V and 24V and supplies up to 1A of driver current, which the manufacturer states is enough to drive up to twenty 3205 MOSFETs.
Key Features
- Adjustable frequency: the operating frequency can be set for different switching applications.
- Overcurrent protection: the circuit responds to excessive current before damage occurs.
- Short circuit protection: faults on the output are handled without destroying the board.
- Self-locking turn-off: in a fault condition the output is disabled automatically and stays off.
- Output voltage regulation: the output level can be adjusted for precise control.
- Built-in 5.1V reference: trimmed to ±1%, so external reference resistors are not required.
- NOR logic output stage: keeps the off-state output low, which improves efficiency.
Specifications Explained
12V to 24V output means the board is aimed at the common low-voltage inverter and converter range, covering 12V battery systems and 24V setups. Up to 1A driver current describes the gate-drive capability rather than the load current of the final power stage; it is what allows the board to switch multiple MOSFETs. The 5.1V reference trimmed to ±1% gives the regulation loop a stable comparison point without extra components. The NOR logic output stage ensures a defined low level when the output is off, avoiding floating gate signals.
Compatibility and Requirements
The board is designed for switching power supplies and MOSFET driver stages operating in the 12V to 24V range. It can drive up to twenty 3205 MOSFETs according to the supplied data. A suitable DC supply, external power stage components and wiring are required to complete a working circuit; these are not part of the board.
Typical Uses
- Power inverter control stages
- Regulated switching supply projects
- MOSFET gate driving in multi-device power stages
- Educational and bench prototyping of PWM control circuits
What's in the Box
Package contents are not specified for this listing. Please confirm the included items before ordering if you need accessories or connectors.
Quick specs
- Item Type
- Driver Board
- Output Voltage
- 12V to 24V
- Driver Current (A)
- Up to 1A
- Output Logical Signal
- NOR logic output stage
- Shipping Weight
- 0.01 kg
- Shipping Dimensions
- 10 × 6 × 2 cm













