
1 / 3 · Click to enlarge
AI Summary
A reusable 20 x 250 mm reverse Velcro cable tie with a flexible silicone webbing body that grips wire bundles firmly without tools. It fastens and releases in seconds, making it easy to reorganise cabling again and again.
Key Highlights
- Reverse Velcro hook-and-loop design for a secure, quick-release hold
- 20 mm width and 250 mm length suit small to medium cable bundles
- Flexible silicone webbing stays soft against wire insulation
- Tool-free installation and easy replacement when routes change
- Reusable construction supports repeated organising and re-routing
- Lightweight at roughly 7 g per tie
Ideal For
- Drone and FPV builders tidying internal wiring harnesses
- RC hobbyists organising servo and receiver leads
- Desk and home office users managing charging cables
- Workshop and DIY users bundling tool cords
- Anyone who needs reusable, tool-free cable straps
Buying Tip
Check your largest bundle against the 250 mm length before ordering, and buy several ties so each cable run can be secured at more than one point.
Elecvora expert review
Our verdict
A simple, well-sized reusable strap that does one job reliably: holding cable bundles without tools or damage. The silicone webbing and reverse Velcro make it easy to adjust repeatedly, which is exactly what changing builds and desk setups demand.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Reusable fastening that opens and closes without tools
- Soft silicone webbing is gentle on cable jackets
- Useful 20 mm width and 250 mm length for common bundles
- Very light at around 7 g per tie
Cons
- Not a permanent or load-bearing fixing
- No adhesive mount or anchor included
- Single tie per pack, so larger jobs need multiple units
Best for
Reusable cable bundling in drones, RC models and desk setups
Not ideal for
Permanent structural mounting or heavy load restraint
Specifications
| Sensor Type | Strain Gauge Based Load Cell |
|---|---|
| Length (mm) | 250 |
| Weight (g) | 07 |
| Width (mm) | 20 |
| Operating Voltage (V) | 2.7~5.5 |
| Dimensions (L x W x H) mm | 170 x 130 x 130 |
| Installation | Tool-Free, Easy Replacement |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 18 × 5 × 2 cm |
What's in the box
- 1 x SimpliFly 20 x 250 mm reverse Velcro zip tie with silicone webbing
Frequently Asked Questions
How do these reverse Velcro ties fasten?
Are they reusable?
What size bundles can they hold?
Do they need power or any tools?
What is included in the package?
Will the strap damage my cables?
Overview
The SimpliFly 20 x 250 mm reverse Velcro zip tie is a reusable cable strap for keeping wiring tidy without cutting, clipping or tying anything permanently. The reverse Velcro layout puts the gripping hook-and-loop face where it meets the strap itself, so the tie closes on contact and peels open again when you need to change a route. A silicone webbing body gives the strap its flexibility, letting it follow curves and sit flat against a frame or desk edge rather than springing away.
At 20 mm wide and 250 mm long, it handles the everyday bundles found in electronics work: receiver and servo leads, charging cables, network runs and tool cords. Each tie weighs around 7 g, so a handful adds negligible mass to a drone or RC build.
Key Features
- Reverse Velcro fastening: the strap grips along its own length for a firm hold and a fast release.
- Silicone webbing: flexible, durable material that stays soft against cable jackets and painted surfaces.
- Tool-free installation: wrap, press and peel by hand; no cutters or dispensers required.
- Reusable by design: reposition or remove a tie whenever a layout changes.
- Practical size: 20 mm width spreads pressure across a bundle; 250 mm length gives useful wrap range.
Specifications Explained
Width and length: the 20 mm width gives the strap enough surface area for a stable hold on grouped wires, while 250 mm of length lets you loop around thicker bundles or double back for a tighter wrap.
Weight: at roughly 7 g per tie, weight is not a concern even when several are used inside a small airframe.
Silicone webbing: this is the flexible body of the strap. It keeps the tie pliable so it conforms to shapes instead of kinking, and it is the reason the tie can be reused repeatedly.
Tool-free installation: no additional hardware is needed to fit or replace a tie, which matters when you are working inside a crowded frame or behind a desk.
Compatibility and Requirements
These ties are a general-purpose cable management accessory and need no power source or controller to operate. They are sized for small to medium wire bundles and are suited to drone frames, RC models, electronics benches and cable runs around the home or office. No mounting hardware is supplied, so plan on wrapping the tie around a frame tube, standoff, cable bundle or similar anchor point.
Typical Uses
- Grouping receiver, ESC and camera leads inside a drone or RC build
- Keeping charging and data cables tidy on a desk or in a bag
- Routing network and power cables behind a workstation
- Bundling tool cords and hobby wiring in a workshop
- Temporary cable control during assembly, testing or repairs
What's in the Box
1 x SimpliFly 20 x 250 mm reverse Velcro zip tie with silicone webbing.
Quick specs
- Sensor Type
- Strain Gauge Based Load Cell
- Length (mm)
- 250
- Weight (g)
- 07
- Width (mm)
- 20
- Operating Voltage (V)
- 2.7~5.5
- Dimensions (L x W x H) mm
- 170 x 130 x 130

















