
1 / 3 · Click to enlarge
AI Summary
A compact bistable switch module that toggles state with a single button press and holds it after release. Its 0.5uA draw and 2.2-5V range make it well suited to battery-powered and embedded projects.
Key Highlights
- Single-button bistable toggle holds its state after release
- Ultra-low 0.5uA operating current suits battery-powered builds
- Wide 2.2V to 5V operating voltage range
- Compact 15 x 14 mm board weighing around 2 g
- Simple integration into DIY, automation and embedded designs
- Built from quality electronic components for durable use
Ideal For
- Makers building battery-powered toggle circuits
- Electronics students learning bistable switching
- DIY hobbyists adding a single-button on/off control
- Embedded developers needing a compact low-power switch stage
- Home automation tinkerers building simple control panels
Buying Tip
Confirm your project's supply rail sits within 2.2V to 5V and plan how you will mount and wire the button before soldering, since the board is only 15 x 14 mm.
Elecvora expert review
Our verdict
A neat little module for anyone who wants a latching single-button toggle without building the circuit from scratch. Its 0.5uA draw and 2.2-5V range make it genuinely useful in battery-powered and embedded work.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very low 0.5uA operating current
- Wide 2.2V to 5V supply range
- Single-button bistable operation
- Compact 15 x 14 mm, 2 g board
Cons
- Requires a separate push button
- Soldering or connector work needed to wire it in
- Limited documentation on pinout in the supplied data
Best for
Battery-powered DIY and embedded projects needing a latching toggle
Not ideal for
Users wanting a plug-and-play module with pre-attached button and leads
Specifications
| Item Type | Bistable Switch Module |
|---|---|
| Model No. / Name | Single Bond Bistable Switch |
| Operating Current (mA) | 0.0005 |
| Operating Voltage (V) | 2.2 – 5 |
| Length (mm) | 15 |
| Width (mm) | 14 |
| Weight (g) | 02 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 4 × 3 × 2 cm |
What's in the box
- 1 x Single Bond Button Bistable Switch Module 2.2-5V 0.5uA
Frequently Asked Questions
What does bistable mean on this module?
What voltage does it need?
How much current does it draw?
Does it come with a button?
How big is the board?
How should I care for it?
Overview
The Single Bond Button Bistable Switch Module is a small, ready-built switching board for projects that need a latching toggle action from one push button. Press the button once and the module changes state; press again and it changes back. Because the state is bistable, it stays where you left it after the button is released, which is different from a momentary push button that only makes contact while held.
At roughly 15 mm by 14 mm and about 2 g, the board fits into tight enclosures, handheld gadgets and compact prototypes. It is a practical building block for makers who want a low-power toggle stage without designing and testing a discrete latch circuit themselves.
Key Features
- Single-button control: one button toggles the module between its two stable states.
- Bistable behaviour: the selected state is retained after the press ends.
- Very low current draw: 0.5uA typical operating current keeps standby drain minimal.
- Flexible supply range: operates from 2.2V to 5V.
- Compact footprint: 15 x 14 mm board at approximately 2 g.
Specifications Explained
Operating current: 0.5uA
This is the headline figure. A 0.5uA draw is roughly half a microamp, so the module adds very little load to a battery or low-power rail. That matters in designs where the switch sits idle for long periods and every microamp counts.
Operating voltage: 2.2V to 5V
The wide range covers common low-voltage logic supplies as well as 5V rails, giving you room to use the module in different builds without adding a regulator just for the switch. Check that your supply stays inside this window.
Size and weight
At 15 x 14 mm and about 2 g, the board is small enough for panel-mount buttons, wearable-adjacent builds and densely packed project boxes. Plan a little clearance around it for wiring and button access.
Compatibility and Requirements
The module needs a DC supply within 2.2V to 5V and a push button wired to its input. You will also need a load or signal line for the switched output, plus basic soldering or connector skills depending on how you mount it. No other accessories are confirmed in the product data, so check your own wiring plan before ordering.
Typical Uses
- Latching power on/off control in battery-powered gadgets
- Mode selection in DIY electronics and embedded prototypes
- Simple toggle inputs for home automation projects
- Educational builds demonstrating bistable logic
- Compact control panels where a single button is preferred
What's in the Box
1 x Single Bond Button Bistable Switch Module 2.2-5V 0.5uA.
Quick specs
- Item Type
- Bistable Switch Module
- Model No. / Name
- Single Bond Bistable Switch
- Operating Current (mA)
- 0.0005
- Operating Voltage (V)
- 2.2 – 5
- Length (mm)
- 15
- Width (mm)
- 14













