Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact subwoofer low-pass filter board that accepts 10-24V DC and lets you adjust the crossover from 22Hz to 300Hz. It delivers clean mono bass output from mono or stereo inputs.

Key Highlights

  • Adjustable low-pass crossover from 22Hz to 300Hz
  • Wide 10V-24V DC single power supply range
  • Accepts mono or stereo input with mono subwoofer output
  • Fully sealed potentiometers for durable, reliable adjustment
  • Pure copper screw terminals for secure wiring
  • Replaceable op-amp IC socket for easy upgrades

Ideal For

  • DIY audio enthusiasts building custom subwoofer systems
  • Car audio installers adding a subwoofer to a factory stereo
  • Home theater owners wanting adjustable bass filtering
  • Electronics hobbyists experimenting with op-amp upgrades
  • Makers integrating bass management into compact projects

Buying Tip

Check that your DC supply voltage falls within 10V–24V and that your subwoofer amplifier accepts a mono line-level input before ordering.

Elecvora expert review

Our verdict

A practical, low-cost low-pass filter board that gives DIYers adjustable bass management with a replaceable op-amp for tweaking. It is straightforward to wire and well-suited to compact installations.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Adjustable 22Hz–300Hz crossover covers most subwoofer needs
  • Wide 10V–24V single-supply operation
  • Sealed potentiometers and copper terminals for durability
  • Replaceable op-amp socket encourages experimentation

Cons

  • Requires a separate DC power supply (not included)
  • Soldering or careful wiring is needed for connections
  • No enclosure included; board must be mounted

Best for

DIY audio builders and car audio enthusiasts wanting adjustable low-pass filtering

Not ideal for

Users seeking a plug-and-play finished subwoofer crossover with enclosure and power supply

Specifications

Shipping Weight0.01 kg
Shipping Dimensions6 × 5 × 4 cm

What's in the box

  • 1 x Single Power 10-24V Overweight Subwoofer Front Stage Plate Low Pass Filter Board
  • 2 x Gasket
  • 2 x Knob Cap

Frequently Asked Questions

What power supply does this board need?
It operates from a single DC supply between 10V and 24V. The power indicator LED shows when the board is powered.
Can I use a stereo input?
Yes, the board accepts mono or stereo audio input and outputs a mono signal for a subwoofer amplifier.
What is the adjustable frequency range?
The low-pass crossover can be adjusted from 22Hz to 300Hz using the sealed potentiometer.
Can I replace the operational amplifier?
Yes, the board has an IC socket that allows replacement or upgrading with compatible operational amplifiers.
What is included in the package?
You receive the filter board, two gaskets, and two knob caps. Power supply and wiring are not included.
How do I mount the board?
Use the four mounting holes with 3.2mm diameter, spaced 70 × 24mm apart. The PCB is 78 × 32mm.

Overview

The Single Power 10-24V Overweight Subwoofer Front Stage Plate Low Pass Filter Board is a compact pre-amplifier module that cleans up the signal going to your subwoofer amplifier. It filters out higher frequencies and passes only the low bass range, helping your subwoofer reproduce deep notes without unwanted midrange or treble content. The board runs from a single DC 10V to 24V supply and accepts either mono or stereo audio input, producing a mono subwoofer output.

Built on a 1.6mm FR-4 fiberglass PCB, the module measures 78 × 32mm and includes mounting holes spaced 70 × 24mm with 3.2mm diameter. A power indicator LED shows when the board is active, and the replaceable operational amplifier socket lets you try compatible op-amps without soldering directly to the chip.

Key Features

  • Adjustable crossover: Tune the low-pass frequency from 22Hz to 300Hz to suit your subwoofer and room.
  • Single power supply: Operates from DC 10V to 24V, simplifying integration into existing audio projects.
  • Flexible input: Connect mono or stereo sources; the output is mono for subwoofer duty.
  • Durable controls: Fully sealed potentiometers resist dust and wear for long-term reliability.
  • Secure connections: Pure copper screw terminals hold wires firmly and make rewiring easy.
  • Clean signal: High signal-to-noise ratio and strong anti-interference design support stable bass output.

Specifications Explained

The 22Hz–300Hz frequency range covers the entire typical subwoofer band, letting you set the filter to match the natural roll-off of your main speakers. The 10V–24V input gives headroom for common DC supplies, and the onboard LED confirms power. The 78 × 32mm board with 70 × 24mm mounting hole spacing fits neatly into small enclosures or custom plates. The IC socket is useful if you want to experiment with different op-amps later; just ensure any replacement is compatible with the circuit.

Compatibility and Requirements

This board requires a DC power source between 10V and 24V. It accepts mono or stereo line-level audio input and outputs a mono signal intended for a subwoofer amplifier. The operational amplifier socket allows replacement with compatible op-amps. No other compatibility details are specified.

Typical Uses

Use this module in DIY subwoofer builds, car audio systems, home theater bass upgrades, or any project where you need to extract low frequencies from a full-range signal. It is also suitable for adding a subwoofer output to an existing amplifier that lacks one.

What's in the Box

  • 1 x Single Power 10-24V Overweight Subwoofer Front Stage Plate Low Pass Filter Board
  • 2 x Gasket
  • 2 x Knob Cap

Quick specs

Shipping Weight
0.01 kg
Shipping Dimensions
6 × 5 × 4 cm
See all specifications