Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SKYRC, this skyrc charger/discharger and accessories is a good fit for RC and FPV hobbyists. Main specs: charge current range (a) 0.1 to 12; dischage current range (a) 0.1 to 2.0; charging power (w) 100W X 2. Check that your power source supplies 100 ~ 240 before connecting it.

Key Highlights

  • Charge Current Range (A): 0.1 to 12
  • Dischage Current Range (A): 0.1 to 2.0
  • Charging Power (W): 100W X 2

Ideal For

  • Building or repairing a model
  • Upgrading flight performance
  • Spares for the field

Buying Tip

Match the battery chemistry, voltage and connector to your device, and charge it only with a charger made for that chemistry.

Specifications

Charge Current Range (A)0.1 to 12
Dischage Current Range (A)0.1 to 2.0
Input Voltage (VAC)100 ~ 240
Input Voltage (VDC)11 ~ 18
Charging Power (W)100W X 2
Discharging Power (W)10
Nominal Capacity (mAh)NiMH/NiCd:100-50000mAh LiPo/LiIon/LiFe/LiHV:100-50000mAh Pb: 100-50000mAh
Drain Current (Id) (A)500
Li-ion/Po cell count1 ~ 6
NiCd/NiMH cell count1 ~ 15 Cells
Pb battery voltage2 ~ 20
Dimensions (L x W x H) mm178 × 135 × 96
Input TypeAC/DC Both
Balance Current(mA)500mA
Battery TypeLiPo/LiHV/LiFe/LiIon: 1-6cells NiMH/NiCd: 1-15cells Pb: 2-20V
Channel2
Shipping Weight0.98 kg
Shipping Dimensions22 × 20 × 12 cm

Overview

The SkyRC T200 2×100W Dual Channel LiPo / LiFe / LiIon / NiMH / NiCd / Pb Balance Charger, made by SKYRC, is listed in our skyrc charger/discharger and accessories range and suits RC and FPV hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Charge Current Range (A): 0.1 to 12 (quoted range is usually line-of-sight; walls and interference shorten it)
  • Dischage Current Range (A): 0.1 to 2.0 (quoted range is usually line-of-sight; walls and interference shorten it)
  • Input Voltage (VAC): 100 ~ 240 (match this to your power supply; too high a voltage can damage the part)
  • Input Voltage (VDC): 11 ~ 18 (match this to your power supply; too high a voltage can damage the part)
  • Charging Power (W): 100W X 2 (check which plug or cable it needs)
  • Discharging Power (W): 10 (check which plug or cable it needs)
  • Nominal Capacity (mAh): NiMH/NiCd:100-50000mAh LiPo/LiIon/LiFe/LiHV:100-50000mAh Pb: 100-50000mAh
  • Drain Current (Id) (A): 500 (your supply must deliver at least this much current)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SKYRC T200 1-6S LiPo/LiFe/LiIon Dual Balance Charger is a 200W AC/DC charger that comes ready to charge in the most compact design yet while taking up minimal space in the pit area. Only taking up about as much bench space as a pair of battery packs, the charger delivers dedicated 100W integrated power per each of the two complete charging circuits. Inside the case, there’s enough transformer power to fill two batteries simultaneously at up to 12 amps each, that you can pump life into everything from a receiver pack to a 6S LiPo or 15S NiMH or NiCD. All the programmability you expect of a modern higher-level charger is built in! With each charging channel programmed and operating independently, SkyRC T200 allows you to charge two batteries simultaneously, and it will intelligently and automatically charge the packs at once to their maximum capacity. To the top of it, the cells being charged do not even necessarily have the same configuration or be of the same chemical type. The juice box comes with the charging algorithm for the most common battery chemistries: LiPo, Li-Ion, LiHV, LiFe, NiMH, NiCD, and Pb (lead-acid). With the standard factor of the XT60 interface, plugging prevents reverse polarity and ensures super-solid connection. The charger allows users to change the end voltage (for the expert user only). With the universal-voltage input circuit, you don't need hassle finding a voltage converter between 110V and 220V while traveling around!

Features:

  1. 2 independent charging channels.
  2. 2 x 100W charging power and maximum 12.0A charging current.
  3. 10 Battery memories.
  4. High-contrast LCD display.
  5. Easy operation.
  6. XT-60 connector on charging output.
  7. XH balancer connector.
  8. Various security monitoring.

Package Includes:

1 XSKYRC T200 1-6S LiPo/LiFe/LiIon Dual Balance Charger.

1 x . Power Cord with EMC Ferrite Core

1 x Instruction Manual

Quick specs

Charge Current Range (A)
0.1 to 12
Dischage Current Range (A)
0.1 to 2.0
Input Voltage (VAC)
100 ~ 240
Input Voltage (VDC)
11 ~ 18
Charging Power (W)
100W X 2
Discharging Power (W)
10
See all specifications