
1 / 5 · Click to enlarge
AI Summary
The SkyRC T400Q is a four-channel balance charger that delivers 100W and 12A per channel for LiPo, LiHV, LiFe, LiIon, NiMH, NiCd and Pb batteries. Its quad independent circuits let you charge four packs at once, cutting preparation time significantly.
Key Highlights
- Four independent channels, each up to 100W and 12A
- Supports LiPo, LiHV, LiFe, LiIon, NiMH, NiCd and Pb
- AC 100-240V or DC 11-18V input for home or field use
- Built-in XT60 connectors with anti-reversal design
- Blue backlit 2x16 LCD for clear status monitoring
- Compact vertical tower saves valuable bench space
Ideal For
- FPV drone pilots with multiple LiPo packs
- RC car and truck racers preparing several battery sets
- Airplane and helicopter hobbyists using mixed chemistries
- Boat and crawler enthusiasts needing fast turnaround
- Workshop users with limited bench space
Buying Tip
Check that your batteries have XT60 connectors or plan to use adapters, and confirm your DC power supply can deliver enough current if you charge at high rates on all four channels.
Elecvora expert review
Our verdict
The SkyRC T400Q is a practical four-channel charger that saves time for hobbyists with multiple battery types. Its 100W per channel output and wide chemistry support make it a versatile bench companion.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Four independent 100W channels for simultaneous charging
- Supports seven battery chemistries including LiHV and Pb
- AC/DC input adds flexibility for home and field use
- Compact vertical design saves bench space
Cons
- Discharge power is limited to 10W, so discharging is slow
- Batteries and adapters are not included
- No DC power supply included for field charging
Best for
RC hobbyists who need to charge multiple packs quickly at home or at the track
Not ideal for
Those who primarily need high-power discharging or a single-channel high-wattage charger
Specifications
| Charge Current Range (A) | 0.1 to 12 |
|---|---|
| Dischage Current Range (A) | 0.1 to 2.0 |
| Input Voltage (VAC) | 100-240V 50/60Hz |
| Input Voltage (VDC) | 11-18V |
| Display Type | 2x16 with blue light LCD |
| Charging Power (W) | 100W X 4 |
| Dimensions (L x W x H) mm | 186 × 103 × 209mm |
| Channel | 4 |
| Discharging Power (W) | 10 |
| Body Material | Plastic |
| Input Type | AC/DC Both |
| Battery Type | LiPo/LiHV/LiFe/LiIon: 1-6S NiMH/NiCd: 1-15S Pb: 2-20V |
| Charge Voltage(V) | NiMH/NiCd: Delta peak detection. LiPo: 4.18-4.25V/S, LiFe: 3.58-3.7V/S, Pb: 1.8-2.0V/SLiIon: 4.08-4.2V/S, LiHV: 4.25-4.35V/S |
| Discharge cut-off voltage(V) | NiMH/NiCd: 0.1-1.1V/S, LiPo:3.0-3.3V/S, LiFe:2.6-2.9V/SLiIon: 2.9-3.2V/S, LiHV: 3.1-3.4V/S |
| Balance Current(mA) | 500mA Max. |
| Operating Temperature (°C) | 0°C-40°C |
| Operating humidity | 0%-75% |
| Storage Temperature (°C) | 10℃-70℃ |
| Storage Humidity | 0%-75% |
| Weight (g) | 1610g |
| Shipping Weight | 1.962 kg |
| Shipping Dimensions | 28 × 25 × 15 cm |
What's in the box
- 1 x SkyRC T400Q 4x100W Quad Balance Charger/Discharger
- 1 x Instruction Manual
- 1 x AC Power Cord
Frequently Asked Questions
Can I charge four different battery types at the same time?
What input power does the T400Q require?
Does the charger include battery connectors?
What is the maximum charge current per channel?
Can I discharge batteries with this charger?
What is included in the box?
Overview
The SkyRC T400Q is a multi-chemistry balance charger and discharger built for RC enthusiasts who need to prepare multiple battery packs quickly. Its four independent charging circuits can each deliver up to 100W and 12A, giving a total output of 400W. This means you can charge four batteries simultaneously, whether they are small receiver packs or large 6S LiPo packs, without waiting for one channel to finish before starting another.
The charger supports the most common battery chemistries: LiPo, LiHV, LiFe, LiIon, NiMH, NiCd and Pb (lead-acid). Each channel operates independently, so you can mix chemistries and charge different battery types at the same time. The vertical tower design takes up about the same footprint as two battery packs, freeing up bench space for building and repairs.
Key Features
- Quad charging performance: Four independent channels, each up to 100W and 12A, for a total of 400W.
- Multi-chemistry support: Charge LiPo, LiHV, LiFe, LiIon (1-6S), NiMH/NiCd (1-15S) and Pb (2-20V).
- Dual input: Built-in AC power supply (100-240V 50/60Hz) or DC input (11-18V) for field use.
- Integrated XT60 connectors: Anti-reversal design for reliable connection.
- Clear display: Blue backlit 2x16 LCD shows charging status at a glance.
- Portable handle: Easy to carry to the track or flying field.
Specifications Explained
Charge current range 0.1-12A per channel lets you safely charge small packs at low currents or larger packs at higher rates, within the battery manufacturer’s recommendations. Discharge current range 0.1-2.0A and discharge power 10W allow you to discharge packs for storage or testing, though discharging is slower than charging. Balance current up to 500mA helps keep cells in a pack balanced during charging, which is important for lithium batteries.
The charge voltage per cell is adjustable within safe ranges for each chemistry: LiPo 4.18-4.25V, LiFe 3.58-3.7V, LiIon 4.08-4.2V, LiHV 4.25-4.35V, Pb 1.8-2.0V, and NiMH/NiCd use delta-peak detection. Discharge cut-off voltages are also configurable per chemistry to protect your packs from over-discharge. The charger operates in 0-40°C and 0-75% humidity, and weighs 1610g.
Compatibility and Requirements
The T400Q works with batteries equipped with compatible connectors; the built-in XT60 connectors on the charger require batteries with XT60 plugs or appropriate adapters (not included). For AC operation, simply connect the included AC power cord to a 100-240V wall outlet. For DC operation, you need a power supply or battery with 11-18V output (not included). Always ensure the battery’s chemistry and cell count are within the charger’s supported ranges.
Typical Uses
This charger is ideal for RC car, boat, plane, FPV and drone pilots who need to charge multiple packs quickly. It suits hobbyists who use a mix of battery types, such as LiPo for drones and NiMH for transmitters, and want a single charging station. The compact tower design makes it a good fit for home workshops with limited bench space.
What's in the Box
- 1 x SkyRC T400Q 4x100W Quad Balance Charger/Discharger
- 1 x Instruction Manual
- 1 x AC Power Cord
Quick specs
- Charge Current Range (A)
- 0.1 to 12
- Dischage Current Range (A)
- 0.1 to 2.0
- Input Voltage (VAC)
- 100-240V 50/60Hz
- Input Voltage (VDC)
- 11-18V
- Display Type
- 2x16 with blue light LCD
- Charging Power (W)
- 100W X 4



















