
1 / 2 · Click to enlarge
At a glance
This smartelex adjustable module is a good fit for makers, students and electronics hobbyists. Main specs: output voltage 1.8A; switching frequency Typical: 1MHz, Maximum: 1.5MHz; conversion efficiency 0.96. Check that your power source supplies 1.8A before connecting it.
Key Highlights
- Small and easy to carry or mount
- Adjustable settings
- Output Voltage: 1.8A
- Switching frequency: Typical: 1MHz, Maximum: 1.5MHz
- Conversion efficiency: 0.96
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Output Voltage | 1.8A |
|---|---|
| Switching frequency | Typical: 1MHz, Maximum: 1.5MHz |
| Conversion efficiency | 0.96 |
| Operating Temperature (°C) | -50 to 85 |
| Length (mm) | 22 |
| Width (mm) | 17 |
| Output Ripple | <30mV |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 3.5 × 3 × 1.5 cm |
Overview
The SmartElex Mini MP1584 DC-DC 3A Adjustable Buck Module is listed in our smartelex adjustable module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Output Voltage: 1.8A (match this to your power supply; too high a voltage can damage the part)
- Switching frequency: Typical: 1MHz, Maximum: 1.5MHz (make sure the rest of your system works at this frequency)
- Conversion efficiency: 0.96
- Operating Temperature (°C): -50 to 85
- Length (mm): 22 (measure your mounting space before ordering)
- Width (mm): 17 (measure your mounting space before ordering)
- Output Ripple: <30mV
- Shipping Weight: 0.05 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The SmartElex Mini MP1584 DC-DC 3A Adjustable Buck Module is ultra small adjustable 0.8V to 20V output DC to DC step-down Buck converter that uses an MP1584EN high frequency switching regulator and integrated high voltage power MOSFET. It features a soft start, thermal shutdown, and under-voltage lockout (UVLO) to protect the module from operating at insufficient supply voltage. Small size, lightweight, low internal power consumption, and wide input voltage range of 4.5V to 28V make this module suitable for a variety of different applications where small size and lightweight voltage conversion is needed, including RC cars and airplanes, quadcopters, robotics, Arduino modules, and DIY devices.
Applications:
- DIY 8051 / AVR / ARM / PIC / Arduino / Raspberry-Pi projects
- Robotics
- Breadboard power supply
- Manual speed adjustment of small DC motors
- Power Supply for RC project planes, cars, helicopters
- Universal Battery Elimination Circuit (UBEC) for 2S-6S lipo battery pack
- Receiver/servo power supply
- Communications equipment power supply
- Mobile equipment power supplies
Features :
- Wide 4.5V to 28V Operating Input Range
- High-Efficiency Pulse Skipping Mode for Light Load
- Ceramic Capacitor Stable
- Internal Soft-Start
- Internally Set Current Limit without a Current Sensing Resistor
Package Includes :
1 x SmartElex Mini MP1584 DC-DC 3A Adjustable Buck ModuleQuick specs
- Output Voltage
- 1.8A
- Switching frequency
- Typical: 1MHz, Maximum: 1.5MHz
- Conversion efficiency
- 0.96
- Operating Temperature (°C)
- -50 to 85
- Length (mm)
- 22
- Width (mm)
- 17














