
1 / 2 · Click to enlarge
At a glance
Made by SmartElex, this smartelex battery charger modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Lipo Charger; charging current 500; battery type 3.7V LiPo/Li-Ion.
Key Highlights
- Item Type: Lipo Charger
- Charging Current: 500
- Battery Type: 3.7V LiPo/Li-Ion
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Lipo Charger |
|---|---|
| Charging Current | 500 |
| Battery Type | 3.7V LiPo/Li-Ion |
| Input | microUSB |
| Output | JST Connector |
| Display Resolution (pixel) | 1280x800 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 5 × 3 × 2 cm |
Overview
The SmartElex Lipo Charger Basic-microUSB, made by SmartElex, is listed in our smartelex battery charger modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Lipo Charger (check which plug or cable it needs)
- Charging Current: 500 (check which plug or cable it needs)
- Battery Type: 3.7V LiPo/Li-Ion (note the battery type so you can order spares or the right charger)
- Input: microUSB
- Output: JST Connector (confirm your cable or board uses the same connector)
- Display Resolution (pixel): 1280x800 (measured diagonally; compare with the space you have before ordering)
- Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 5 × 3 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Charges 3.7V single-cell LiPo and Li-Ion batteries.
- Fixed 500mA charge rate for efficient charging.
- micro-USB connector for easy power input.
- JST-type connector for battery connection.
- Status LED to indicate charging progress.
- Compact form factor with a mounting hole for easy installation.
Package Includes:
1 x SmartElex Lipo Charger Basic-microUSB
1 x Connecting Wire
Quick specs
- Item Type
- Lipo Charger
- Charging Current
- 500
- Battery Type
- 3.7V LiPo/Li-Ion
- Input
- microUSB
- Output
- JST Connector
- Display Resolution (pixel)
- 1280x800



















