Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SmartElex BS312 is a low-power pyroelectric PIR motion sensor that outputs a digital high/low signal from a 2.2–3.7 V supply. Its 120° sensing angle and up to 12 m detection range make it a compact choice for battery-powered motion detection.

Key Highlights

  • Pyroelectric PIR element with digital high/low output
  • Wide 120° horizontal sensing angle
  • Up to 12 m detection range with SB-F-02 lens
  • Ultra-low power draw under 12 µA
  • Compact 28 × 20 mm board with 3×4 mm window
  • Runs from 2.2 to 3.7 V supplies

Ideal For

  • IoT developers building battery-powered motion nodes
  • Makers adding motion detection to microcontroller projects
  • Security system installers needing a compact PIR input
  • Automation engineers prototyping occupancy sensing
  • Students learning digital PIR interfacing

Buying Tip

Check that your supply rail stays within 2.2–3.7 V and plan for the SB-F-02 lens to achieve the full 12 m detection range.

Elecvora expert review

Our verdict

The SmartElex BS312 packs a useful PIR front end into a very small board with genuinely low standby current. It is a practical choice for digital motion sensing where space and power are tight.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Sub-12 µA draw suits battery-powered designs
  • Digital output removes analog signal conditioning
  • Wide 120° angle and up to 12 m range with lens
  • Compact 28 × 20 mm footprint

Cons

  • Requires a supply within 2.2–3.7 V
  • Full detection range depends on the supplied lens
  • No onboard sensitivity adjustment is documented

Best for

Low-power IoT and automation projects needing simple digital motion detection

Not ideal for

Applications requiring adjustable sensitivity or operation above 3.7 V

Specifications

Item TypeMotion Sensor
Model No. / NameBS312
Voltage Rating (V)2.2 to 3.7
Sensor TypePyroelectric PIR
Signal OutputHigh/Low digital output
Detection Distance (mm)Up to 12 m (with SB-F-02 lens)
Sensing Angle120° (horizontal)
Power Consumption<12 µA
Window Size3×4 mm
Length (mm)28
Width (mm)20
Shipping Weight0.01 kg
Shipping Dimensions7 × 5 × 2 cm

What's in the box

  • 1 × SmartElex BS312 PIR Motion Sensor
  • 1 × Fresnel lens
  • 1 × 3-pin interface cable

Frequently Asked Questions

What supply voltage does the BS312 need?
The module operates from 2.2 to 3.7 V. Keep the supply within this range to avoid damaging the sensor.
What type of output does it provide?
It gives a digital high/low signal, so it can connect directly to a microcontroller input pin without an external ADC.
How far can it detect motion?
Detection distance is up to 12 m when the SB-F-02 lens is fitted. Actual range depends on mounting height, angle, and environmental conditions.
What is included with the sensor?
The package contains one BS312 PIR motion sensor, one Fresnel lens, and one 3-pin interface cable.
Is it suitable for battery-powered devices?
Yes. Its power consumption is below 12 µA, which makes it appropriate for low-power and battery-operated designs.
How should I care for the module?
Keep the sensing window and lens clean and free of dust, and avoid exposing the board to moisture or excessive heat. Handle it by the edges to prevent static damage.

Overview

The SmartElex BS312 is a pyroelectric infrared motion sensor module built for embedded and battery-powered projects. It detects human movement by sensing changes in infrared radiation and converts that signal into a digital high/low output through an integrated intelligent control circuit. The module operates from 2.2 to 3.7 V and consumes less than 12 µA, making it well suited to always-on sensing in low-power designs.

Key Features

  • Pyroelectric PIR sensing element for human motion detection
  • Digital high/low signal output for direct connection to microcontrollers
  • 120° horizontal sensing angle for broad coverage
  • Detection distance up to 12 m with the SB-F-02 lens
  • Ultra-low power consumption below 12 µA
  • Electromagnetic shielding enclosure for stable operation
  • Compact 28 × 20 mm board with a 3×4 mm sensing window

Specifications Explained

Voltage rating (2.2 to 3.7 V): The module runs directly from common 3.3 V logic supplies and single-cell lithium batteries, so it can share a rail with most low-power microcontrollers without an extra regulator.

Digital high/low output: Instead of an analog signal, the BS312 gives a simple logic-level change when motion is detected, which simplifies firmware and reduces external components.

Detection distance up to 12 m: With the SB-F-02 Fresnel lens fitted, the sensor can pick up human movement across a room or along a corridor, depending on mounting height and orientation.

120° horizontal sensing angle: A single module covers a wide field of view, reducing the number of sensors needed for a given area.

Power consumption below 12 µA: Standby current is low enough for coin-cell and battery-powered devices that must run for extended periods.

3×4 mm sensing window: The small window pairs with the supplied lens to focus infrared energy onto the pyroelectric element.

Compatibility and Requirements

The BS312 works with any host that can supply 2.2 to 3.7 V and read a digital high/low signal. It is intended for use with the included SB-F-02 Fresnel lens and 3-pin interface cable. No additional signal-conditioning circuitry is required for basic motion detection.

Typical Uses

  • Battery-powered IoT motion nodes
  • Motion-triggered lighting and automation
  • Security and alarm systems
  • Embedded human-presence detection
  • Smart home and building automation prototypes

What's in the Box

  • 1 × SmartElex BS312 PIR Motion Sensor
  • 1 × Fresnel lens
  • 1 × 3-pin interface cable

Quick specs

Item Type
Motion Sensor
Model No. / Name
BS312
Voltage Rating (V)
2.2 to 3.7
Sensor Type
Pyroelectric PIR
Signal Output
High/Low digital output
Detection Distance (mm)
Up to 12 m (with SB-F-02 lens)
See all specifications