
1 / 3 · Click to enlarge
AI Summary
The SmartElex FT232H Breakout adds SPI, I2C, UART, JTAG and digital GPIO to your computer over USB. It is a versatile 3.3V interface board with USB C and JST-SH connectors for quick prototyping and debugging.
Key Highlights
- FTDI FT232H chip for USB to serial and multi-protocol bridging
- Supports SPI, I2C, UART and JTAG protocols
- UART speeds up to 12 Mbps and SPI up to 30 Mbps
- Digital GPIO pins for LEDs, switches and buttons
- USB C and JST-SH connectors for flexible cabling
- Operates at 3.3V logic level
Ideal For
- Electronics hobbyists and makers
- Firmware and embedded developers
- Test engineers needing protocol analysis
- Students learning serial communication
- DIY enthusiasts adding USB to projects
Buying Tip
Confirm that your target devices use 3.3V logic to avoid damage, and remember you will need a USB C cable and appropriate drivers for your operating system.
Elecvora expert review
Our verdict
The SmartElex FT232H Breakout packs a lot of protocol flexibility into a small, well-connected board. It is a solid choice for anyone needing a reliable USB-to-serial or USB-to-GPIO bridge.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Supports multiple protocols including SPI, I2C, UART and JTAG
- High-speed SPI and UART interfaces
- USB C and JST-SH connectors add convenience
- Compact and powered directly from USB
Cons
- 3.3V logic only, may require level shifting for 5V systems
- Drivers and software setup can be non-trivial for beginners
Best for
Developers and hobbyists needing a versatile USB interface for serial protocols
Not ideal for
Those requiring 5V logic compatibility out of the box
Specifications
| Item Type | Breakout |
|---|---|
| USB | USB 2.0 Full-Speed |
| Supported protocols | SPI, I2C, UART, JTAG |
| UART | Up to 12 Mbps. |
| SPI | Up to 30 Mbps. |
| Operating Voltage | 3.3V |
| Shipping Weight | 0.016 kg |
| Shipping Dimensions | 09 × 06 × 03 cm |
What's in the box
- 1 x SmartElex FT232H Breakout - General Purpose USB to GPIO, SPI, I2C - USB C & JST-SH
Frequently Asked Questions
What protocols does the FT232H Breakout support?
What is the operating voltage?
Do I need to install drivers?
What connectors are available?
What is included in the package?
Can I use this with a Raspberry Pi or Arduino?
Overview
The SmartElex FT232H Breakout is a general-purpose USB interface board built around the FTDI FT232H chip. It functions as a standard USB-to-serial converter and adds a multi-protocol synchronous serial engine, allowing it to communicate using SPI, I2C, UART and JTAG. A set of digital GPIO pins is also available for simple input and output tasks. The board is designed for 3.3V operation and provides both USB C and JST-SH connectors, making it easy to integrate into existing setups.
Key Features
- Multi-protocol support: SPI, I2C, UART and JTAG in one board.
- High-speed interfaces: UART up to 12 Mbps and SPI up to 30 Mbps.
- Digital GPIO: Read switches or buttons and drive LEDs.
- Modern connectors: USB C for host connection and JST-SH for compact wiring.
- 3.3V logic: Compatible with many common sensors and peripherals.
Specifications Explained
USB 2.0 Full-Speed: Provides a reliable 12 Mbps link to the host computer, sufficient for all supported protocols. UART up to 12 Mbps: Ideal for high-speed serial communication with microcontrollers or debug ports. SPI up to 30 Mbps: Enables fast data transfer to displays, memory chips and other SPI devices. Operating voltage 3.3V: The board uses 3.3V logic, so ensure connected devices are compatible or use level shifting where necessary.
Compatibility and Requirements
The FT232H Breakout requires a host computer with a USB port and appropriate drivers for the FTDI chip. It operates at 3.3V logic levels; connecting 5V devices directly may require level shifting. The board supports SPI, I2C, UART and JTAG protocols as listed. No additional power supply is needed as it is powered from the USB bus.
Typical Uses
- Adding SPI or I2C capabilities to a PC for sensor interfacing.
- Debugging UART ports on microcontrollers and embedded systems.
- JTAG programming and boundary scan testing.
- Controlling LEDs, reading buttons and switches via GPIO.
- Rapid prototyping of serial protocol communications.
What's in the Box
1 x SmartElex FT232H Breakout - General Purpose USB to GPIO, SPI, I2C - USB C & JST-SH.
Quick specs
- Item Type
- Breakout
- USB
- USB 2.0 Full-Speed
- Supported protocols
- SPI, I2C, UART, JTAG
- UART
- Up to 12 Mbps.
- SPI
- Up to 30 Mbps.
- Operating Voltage
- 3.3V
















