
1 / 3 · Click to enlarge
AI Summary
The SmartElex Battle Relay is a 5V-triggered RC switch that controls loads up to 10A at 125VAC or 7A at 240VAC. It offers full electrical isolation, dual-channel operation, and screw terminals for easy, reliable connections.
Key Highlights
- 5V trigger voltage for direct RC receiver connection
- Switches up to 10A at 125VAC or 7A at 240VAC
- Dual-channel design can drive two brushed motors independently
- Full electrical isolation between receiver and load
- Status and power LEDs simplify operation and troubleshooting
- Wear-resistant screw terminals for secure load wiring
Ideal For
- RC hobbyists building nitro vehicles needing glow plug control
- RC aircraft, boat, and car modellers adding high-power lighting
- BattleBot and RC combat builders controlling auxiliary weapons
- Makers and DIY enthusiasts automating small appliances
- Automotive tinkerers switching non-critical electronics
Buying Tip
Confirm your receiver channel outputs a 5V signal and that your load stays within 10A at 125VAC or 7A at 240VAC before connecting.
Elecvora expert review
Our verdict
The SmartElex Battle Relay is a straightforward, well-isolated RC switch that handles typical hobby loads without fuss. Its dual-channel design and clear LED indicators make it a practical choice for modellers who need reliable remote switching.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Full electrical isolation protects receiver electronics
- Dual-channel capability for independent or mixed motor control
- Screw terminals simplify load connections
- Status and power LEDs aid setup and troubleshooting
- Compact and lightweight for model installations
Cons
- Load ratings are modest for high-current applications
- Requires a receiver channel and suitable 5V supply
- No mounting hardware included
Best for
RC modellers and makers switching moderate AC or DC loads remotely
Not ideal for
Applications requiring more than 10A at 125VAC or 7A at 240VAC
Specifications
| Trigger Voltage (VDC) | 5 |
|---|---|
| Switching Voltage (VAC) | 240@7A, 125@10A |
| Operating Voltage (VDC) | 4.8 ~ 5.8, 4.8 ~ 5.2 |
| Length (mm) | 58 |
| Width (mm) | 25 |
| Weight (g) | 19 |
| Shipping Weight | 0.022 kg |
| Shipping Dimensions | 6 × 5 × 3 cm |
What's in the box
- 1 x SmartElex Battle Relay
Frequently Asked Questions
What trigger voltage does the SmartElex Battle Relay need?
Can I use this relay with a 6V receiver battery?
What is the maximum load I can switch?
Does the relay provide isolation from my receiver?
How many channels does the relay have?
What is included in the package?
Overview
The SmartElex Battle Relay is a radio-controlled relay module designed to let you switch higher-power devices from a standard RC transmitter channel. It accepts a 5V trigger signal from your receiver and uses it to operate relay contacts rated for 10A at 125VAC or 7A at 240VAC. Because the relay provides full electrical isolation, your receiver and radio system are protected from the load circuit. The module is compact, lightweight, and fitted with screw terminals for the load connections, making it suitable for a wide range of hobby and automation tasks.
Key Features
- 5V trigger voltage: Connects directly to a receiver channel without extra level shifting.
- High switching capacity: Handles up to 10A at 125VAC or 7A at 240VAC, enough for many lighting, heating, and small motor loads.
- Dual-channel operation: Can drive two brushed motors independently or be mixed for combined control.
- Full electrical isolation: Keeps your receiver electronics separated from the switched load.
- Status and power LEDs: Provide clear visual feedback on power and relay state.
- Screw terminals: Wear-resistant connections that are easy to wire and secure.
Specifications Explained
The trigger voltage of 5VDC means the relay is intended for receivers and control systems that output a standard 5V signal. The operating voltage range of 4.8 to 5.8VDC (or 4.8 to 5.2VDC depending on the channel) gives some tolerance for typical RC receiver power supplies. The contact ratings tell you the maximum load the relay can switch: 10A at 125VAC and 7A at 240VAC. These ratings are for resistive loads at room temperature, so always check that your device falls within them. The module measures 58mm by 25mm and weighs only 19g, so it adds very little bulk to a model. Typical current draw from the receiver is around 30mA, which is modest for most RC systems.
Compatibility and Requirements
To use the SmartElex Battle Relay you need a radio receiver with a spare channel that can output a 5V signal, and a power source within the 4.8 to 5.8VDC operating range. The relay is designed for loads that do not exceed 10A at 125VAC or 7A at 240VAC. No microcontroller or transistor knowledge is required because the module accepts the receiver signal directly. Ensure that the load you connect is compatible with the relay contact ratings and that all wiring is securely fastened under the screw terminals.
Typical Uses
This relay is commonly used for controlling glow plugs in RC nitro vehicles, switching high-powered lighting systems on large RC aircraft, boats, and cars, and operating auxiliary weapons in RC combat models. It can also be used for domestic appliance control and home automation projects, as well as non-critical automotive electronics such as glow wire. The dual-channel capability makes it suitable for driving two brushed motors independently or for mixed control applications.
What's in the Box
1 x SmartElex Battle Relay.

Quick specs
- Trigger Voltage (VDC)
- 5
- Switching Voltage (VAC)
- 240@7A, 125@10A
- Operating Voltage (VDC)
- 4.8 ~ 5.8, 4.8 ~ 5.2
- Length (mm)
- 58
- Width (mm)
- 25
- Weight (g)
- 19


















