Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A complete ATmega32A development board with an on-board USBASP programmer and 12 MHz crystal. It lets you load HEX files over Micro USB and prototype AVR projects without extra programming hardware.

Key Highlights

  • On-board USBASP programmer for direct HEX file loading via Micro USB
  • 40-pin DIP socket for ATmega32A microcontroller
  • 12 MHz crystal and 32 KB flash, 1024 bytes EEPROM
  • CH340 USB-to-serial for communication with a computer
  • 16x2 LCD and servo motor connectors on board
  • 12V, 5V and GND buses for external peripherals

Ideal For

  • Students learning AVR microcontroller programming
  • Hobbyists prototyping ATmega32 projects
  • Engineers evaluating the ATmega32A capabilities
  • Makers building small control or display systems
  • Classrooms demonstrating embedded concepts

Buying Tip

Remember to order a 40-pin ATmega32A microcontroller and a 9-12 VDC power adapter separately, as neither is included with the board.

Elecvora expert review

Our verdict

The SmartElex ATmega32 Development Board packs the essentials for AVR development into a compact, well-labeled board. The integrated USBASP programmer and CH340 serial interface remove the need for extra adapters, making it a convenient choice for learning and rapid prototyping.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • On-board USBASP programmer simplifies firmware loading
  • CH340 USB-to-serial enables easy computer communication
  • Generous port extensions with clear pin labeling
  • Includes LCD and servo connectors for quick peripherals

Cons

  • Microcontroller and power adapter are not included
  • Servo connector limited to 300 mA
  • Requires driver installation for USBASP and CH340 on some systems

Best for

AVR learners and hobbyists who want an all-in-one ATmega32 development board

Not ideal for

Projects requiring high-current servo control or a pre-soldered microcontroller

Specifications

Item TypeProgrammer, Development Board
Additional Specs.Programmer
ArchitectureAdvanced RISC Architecture
Clock Speed12 MHz
ColorBlack
EEPROM1024Bytes
Flash Memory32 KB
Input Voltage (V)12V
MicrocontrollerATMEGA32A
Operating Voltage (VDC)9 ~ 12
PWM Output Pins4
Weight (g)41
Dimensions (L x W x H) mm100 x 61 x 15
Shipping Weight0.043 kg
Shipping Dimensions12 × 8 × 4 cm

What's in the box

  • 1 x SmartElex ATmega32 Development Board

Frequently Asked Questions

Does the board include the ATmega32A microcontroller?
No, the package includes only the development board. You need to purchase a 40-pin DIP ATmega32A separately and insert it into the on-board socket.
How do I program the board?
Connect the Micro USB port labeled for the on-board USBASP programmer to your computer. Use AVRDUDE or a compatible GUI to load your HEX file directly; no external programmer is needed.
What power supply does the board require?
The board accepts 9 to 12 VDC through the DC jack. The on-board 78M05 regulator provides 5V for the microcontroller and peripherals.
Can I connect a servo motor directly?
Yes, there is a dedicated servo connector, but it can supply only up to 300 mA. For larger servos, use an external power source connected to the 5V or 12V bus.
What is the CH340 USB port used for?
The CH340 provides USB-to-serial communication, allowing the ATmega32 to exchange data with a computer or another serial device. Drivers may be required on some operating systems.
Are the user LEDs and switches assigned to specific pins?
The two user LEDs and two user switches are connected through jumpers, so you can route them to the port pins of your choice.

Overview

The SmartElex ATmega32 Development Board is a general-purpose AVR platform built around the ATmega32A microcontroller. It provides a 40-pin DIP socket for the MCU, an on-board USBASP programmer, and a Micro USB port for serial communication via the CH340 chip. This means you can program the board and communicate with it using standard USB cables, without needing a separate programmer or serial adapter. The board is intended for evaluation, demonstration and prototyping of ATmega32 applications.

Key Features

  • On-board USBASP programmer: Load HEX files directly through the Micro USB port.
  • ATmega32A socket: Supports the 40-pin DIP package for easy replacement.
  • 12 MHz crystal: Provides a stable clock reference for the microcontroller.
  • CH340 USB-to-serial: Enables serial communication with a computer or another serial device.
  • User I/O: Two user LEDs and two user switches, each connected through jumpers to select port pins.
  • Display and servo headers: On-board 16x2 LCD connector and a servo motor connector (up to 300 mA).
  • Power flexibility: On-board 78M05 regulator accepts 9 to 12 VDC through the DC jack, with power status LED and on-off switch.
  • Port access: All four ports are extended with detailed pin labeling for easy identification.

Specifications Explained

The ATmega32A is an 8-bit microcontroller with an advanced RISC architecture, 32 KB of flash memory and 1024 bytes of EEPROM. The 12 MHz clock speed determines instruction timing, and the four PWM output pins support basic motor or LED control. The board operates from a 9 to 12 VDC input, which is regulated to 5V on board. The 12V, 5V and GND buses make it simple to power external modules. Physical dimensions are 100 x 61 x 15 mm and weight is 41 g, so the board is compact enough for benchtop use and light enough for integration into small projects.

Compatibility and Requirements

The board is designed for the ATmega32A in a 40-pin DIP package. Programming requires a Micro USB cable connected to a computer; the on-board USBASP handles firmware loading. Serial communication uses the CH340 USB-to-serial interface, which may require drivers on some operating systems. Power can be supplied through the DC jack with 9 to 12 VDC. The servo connector is limited to 300 mA, so avoid connecting high-current servos directly.

Typical Uses

This board is suitable for learning AVR programming, testing ATmega32 peripherals, building small control systems, and prototyping projects that need an LCD, user buttons, LEDs or servo control. It is also useful for demonstrating microcontroller concepts in classrooms or labs.

What's in the Box

Package includes: 1 x SmartElex ATmega32 Development Board. Micro USB cables, power supply and ATmega32A microcontroller are not included unless otherwise stated.

pin Description

Quick specs

Item Type
Programmer, Development Board
Additional Specs.
Programmer
Architecture
Advanced RISC Architecture
Clock Speed
12 MHz
Color
Black
EEPROM
1024Bytes
See all specifications