
1 / 3 · Click to enlarge
AI Summary
A compact MC33063A-based DC-DC boost converter that raises a 3V-40V input to a fixed 15V output at up to 1.5A. Its filtered, low-ripple output and built-in overload and short-circuit protection make it easy to power sensitive electronics from a low-voltage source.
Key Highlights
- Fixed 15V output from a 3V to 40V DC input range
- Delivers up to 1500 mA for moderately demanding loads
- Filtered output keeps ripple low for sensitive circuits
- Overload and short-circuit protection built in
- Operates from -40°C to +85°C in harsh environments
- Compact 8-pin DIP or SOIC package for easy integration
Ideal For
- Makers building custom power rails on breadboard or perfboard
- Electronics students learning switch-mode boost conversion
- Embedded developers powering 15V sensors and analog circuits
- Robot and RC builders needing a 15V rail from a lower-voltage pack
- Field-instrument designers working in wide temperature ranges
Buying Tip
Confirm your load draws well under 1.5A at 15V and that your input source stays within 3V to 40V, since the output is fixed and cannot be trimmed.
Elecvora expert review
Our verdict
A tidy, well-specified boost stage for anyone who needs a fixed 15V rail from a low-voltage source without designing a converter from scratch. The filtered output and built-in protection make it friendly to sensitive electronics, provided you respect the 1.5A ceiling.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 3V to 40V input range covers many battery and supply options
- Filtered output suits microcontrollers, sensors and analog circuits
- Overload and short-circuit protection add safety during prototyping
- Wide -40°C to +85°C rating suits outdoor and enclosure use
Cons
- Output is fixed at 15V with no adjustment
- Achievable current depends on input voltage and thermal conditions
- Inductor and capacitors must be selected separately for best performance
Best for
Makers and engineers who need a compact fixed 15V boost rail from a 3V to 40V source
Not ideal for
Projects needing an adjustable output or sustained currents beyond 1.5A
Specifications
| Model No. / Name | Boost Converter Module |
|---|---|
| Output Current (mA) | upto 1500 |
| Input Voltage Range (DC) | 3V to 40V |
| Switching frequency | 100 |
| Operating Temperature (°C) | -40 to +85 |
| Package | 8-pin DIP or SOIC |
| Shipping Weight | 0.2 kg |
| Shipping Dimensions | 10 × 7 × 3 cm |
Frequently Asked Questions
What input voltage does this boost module accept?
What is the output of the module?
Is the output filtered?
Does it have protection against faults?
What inductor and capacitors should I use?
What is included with the module?
Overview
The SmartElex MC33063A Boost Module is a step-up DC-DC converter that takes a lower DC input and raises it to a regulated 15V rail. It is built on the MC33063A switching regulator IC, a long-established part that keeps the design simple and the footprint small. Input can range from 3V to 40V, and the module can supply up to 1.5A at its output, so it covers a wide spread of battery-powered and benchtop projects.
The board provides a filtered output that smooths the switching ripple, which matters when the 15V rail feeds microcontrollers, sensors or analog stages that dislike noise. Protection against overload and short circuits is included, and the module is rated to keep working between -40°C and +85°C.
Key Features
- Wide input range: accepts 3V to 40V DC, so many battery packs and low-voltage supplies can drive it.
- Fixed 15V output: no adjustment needed for designs that expect a 15V rail.
- Up to 1.5A output current: enough headroom for small motors, relay boards, sensor clusters and logic circuits.
- Filtered, low-ripple output: cleaner DC for noise-sensitive electronics.
- Protection circuitry: overload and short-circuit safeguards help prevent damage during wiring mistakes.
- Compact package: supplied in an 8-pin DIP or SOIC form factor for straightforward integration.
Specifications Explained
Input voltage (3V to 40V DC): the lower limit means even a partly discharged multi-cell pack can start the converter; the upper limit gives margin when feeding it from a 12V or 24V supply. The input must always stay below the 15V output for boost operation to make sense.
Output current (up to 1500 mA): this is the maximum the module is rated to deliver. In practice, the achievable current depends on the input voltage and the heat the board can shed, so leave some margin in continuous loads.
Switching frequency (100): the module switches at a fixed frequency, which sets the size of the inductor and capacitors used around it.
Operating temperature (-40°C to +85°C): the module is specified for cold outdoor enclosures as well as warm equipment cases.
Package (8-pin DIP or SOIC): the controller is available in either through-hole or surface-mount form, which helps when matching an existing PCB layout.
Compatibility and Requirements
The module needs a DC source within the 3V to 40V window and a load that can accept a fixed 15V rail. For best results, pair it with an inductor in the 100µH to 220µH range and output capacitors of roughly 100µF to 470µF, as recommended for this circuit. Because the output is fixed, there is no trimmer to adjust; check that your device expects 15V before connecting it.
Typical Uses
- Raising a low-voltage battery pack to 15V for portable instruments
- Powering 15V sensors, op-amp circuits and small relay boards
- Prototyping on breadboard or perfboard where a compact boost stage is needed
- Educational projects demonstrating switch-mode power conversion
- Adding a 15V rail inside a robot or RC build that already carries a lower-voltage pack
What's in the Box
Package contents are not confirmed for this listing. Please check the product packaging or contact us before ordering if you need to know exactly what is included.

Quick specs
- Model No. / Name
- Boost Converter Module
- Output Current (mA)
- upto 1500
- Input Voltage Range (DC)
- 3V to 40V
- Switching frequency
- 100
- Operating Temperature (°C)
- -40 to +85
- Shipping Weight
- 0.2 kg



















