
1 / 3 · Click to enlarge
AI Summary
A compact adjustable CC/CV module that turns solar or wind input into a regulated 1.25-25V output for DIY battery charging and LED driving. Two potentiometers let you set voltage and current, with onboard LEDs showing charge status.
Key Highlights
- Adjustable 1.25-25V output with constant current and constant voltage modes
- 3A rated operating current with constant-current range up to 2A
- Onboard LEDs for constant current, charging and full charge
- Compact 38 x 49mm board weighing only 23g
- Solderable connections for direct PCB or wiring integration
- Suits solar, wind, battery charging and LED driver projects
Ideal For
- Makers building small solar or wind charging setups
- Hobbyists assembling DIY battery chargers
- Electronics learners practising soldered power projects
- Builders needing an adjustable constant-current LED driver
- Prototypers regulating low-power DC sources
Buying Tip
Set the constant-current potentiometer before connecting a battery, and add a series diode at the input since the board has no reverse polarity protection.
Elecvora expert review
Our verdict
A genuinely useful little board for controlled charging and constant-current work, provided you accept its limits and add the missing input protection yourself. It is best treated as a building block for soldered DIY projects rather than a plug-and-play charger.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 1.25-25V adjustable output covers many battery voltages
- Adjustable constant-current limit up to 2A for controlled charging
- Clear red and blue status indicators
- Very compact and light at 38 x 49mm and 23g
- Output short circuit protection built in
Cons
- No input reverse polarity protection; a series diode is required
- Heat sink not included and needed above 15W
- IC variant is shipped at random
Best for
DIY solar, wind and battery charging projects with soldered connections
Not ideal for
Users wanting a ready-to-use plug-in charger with no assembly
Specifications
| Item Type | Power Supply Module |
|---|---|
| Output Voltage | 1.25 ~ 25 |
| Length (mm) | 38 |
| Width (mm) | 49 |
| Weight (g) | 23 |
| Max. Operating Current (A) | 3 |
| Shipping Weight | 0.027 kg |
| Shipping Dimensions | 9 × 9 × 3 cm |
What's in the box
- 1 x Solar/Wind energy Charging CC/CV Power Supply Module
Frequently Asked Questions
What output voltage range does this module provide?
Can I use it to charge a 12V battery?
Does it protect against reversed input polarity?
What is included in the package?
How much current can it handle?
Which IC will my module have?
Overview
This CC/CV power supply module is a compact adjustable board for DIY power and charging builds. It regulates an input from sources such as solar panels or wind generators into a stable constant-current, constant-voltage output. The output voltage is adjustable from 1.25V to 25V, and the board is rated for 3A operating current. At just 38 x 49mm and 23g, it is easy to fit into small enclosures, prototype chassis and custom projects.
Key Features
- Non-isolated buck-boost constant-current, constant-voltage charging module
- Adjustable output from 1.25V to 25V
- 3A rated operating current, with a constant-current range of 0 to 2A
- Three onboard indicators: constant current (red), charging (red) and full charge (blue)
- Output short circuit protection
- Solderable connections for direct PCB mounting or wired installation
Specifications Explained
Output voltage (1.25-25V): the wide adjustable range lets you target common battery and load voltages, from small cells up to 24V packs, using the same board.
Current (3A rated, 0-2A constant current): the module is rated at 3A operating current, while the constant-current limit is adjustable up to 2A. That makes it useful for controlled charging where you want to cap the current delivered to a battery.
Indicators: the red constant-current and charging LEDs show when the board is limiting current or actively charging, and the blue LED signals a full charge. This gives you visual feedback without extra meters.
Size and weight: at 38 x 49mm and 23g, the board adds very little bulk to a build.
Potentiometer direction: turn clockwise to increase and counterclockwise to decrease the set value.
Compatibility and Requirements
The module has no input reverse polarity protection, so a diode should be connected in series at the input port if polarity mistakes are possible. Connections are made by soldering, and the board can be soldered directly to a PCB. If your project draws more than 15W, a heat sink should be installed; a heat sink is not included. When using solar as the supply, the input power should be about 1.1 times the output power. The product ships with one of two IC variants (LM2577S or XL6019E1) that share the same working behaviour, and the variant is selected at random.
Typical Uses
- Charging 4V, 6V, 12V, 14V and 24V battery packs
- Nickel-cadmium and nickel-metal hydride battery chargers
- Solar panel and wind generator voltage regulation
- High-power constant-current LED driver
- DIY power adapter and car power supply projects
What's in the Box
1 x Solar/Wind energy Charging CC/CV Power Supply Module. A heat sink and input diode are not included.
Quick specs
- Item Type
- Power Supply Module
- Output Voltage
- 1.25 ~ 25
- Length (mm)
- 38
- Width (mm)
- 49
- Weight (g)
- 23
- Max. Operating Current (A)
- 3













