
1 / 4 · Click to enlarge
At a glance
Made by SparkFun, this bluetooth and nrf modules is a good fit for makers, students and electronics hobbyists. Main specs: voltage rating 3.3; input voltage (v) 3.3V@600mA; processor ARM Cortex-M4 CPU BT 5.0 STACK. Check that your power source supplies 3.3 before connecting it.
Key Highlights
- Wireless connection
- Small and easy to carry or mount
- Voltage Rating: 3.3
- Input Voltage (V): 3.3V@600mA
- Processor: ARM Cortex-M4 CPU BT 5.0 STACK
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Voltage Rating | 3.3 |
|---|---|
| Input Voltage (V) | 3.3V@600mA |
| Processor | ARM Cortex-M4 CPU BT 5.0 STACK |
| Connector Type | 2 pole JST PH |
| Flash Memory | 1MB |
| RAM | 256 kB |
| Interface | I2C |
| Length (mm) | 50 |
| Width (mm) | 25 |
| Weight (g) | 3 |
| Shipping Weight | 0.006 kg |
| Shipping Dimensions | 7 × 4 × 1 cm |
Overview
The SparkFun DEV-15025 Pro nRF52840 Mini - Bluetooth Development Board, made by SparkFun, is listed in our bluetooth and nrf modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Voltage Rating: 3.3 (match this to your power supply; too high a voltage can damage the part)
- Input Voltage (V): 3.3V@600mA (match this to your power supply; too high a voltage can damage the part)
- Processor: ARM Cortex-M4 CPU BT 5.0 STACK (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Connector Type: 2 pole JST PH (confirm your cable or board uses the same connector)
- Flash Memory: 1MB (more memory leaves room for larger programs and buffers)
- RAM: 256 kB (more memory leaves room for larger programs and buffers)
- Interface: I2C (confirm your cable or board uses the same connector)
- Length (mm): 50 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Nordic Semiconductor nRF52840 Mini is a breakout and development board for the nRF52840, a powerful combination of ARM Cortex-M4 CPU and 2.4GHz Bluetooth radio from SparkFun. With the nRF52840 at the heart of your project, you'll have access to an almost limitless number of project possibilities in a surprisingly small package.
Most of the critical I/O pins, including GPIO and those required for power, are separated on our mini development board for the nRF52840, which has a footprint that is nearly identical to the Arduino Pro Mini (except those covered by the Qwiic Connector). It has a USB interface (which takes advantage of the nRF52840's native USB support) that can be used to program, power, and communicate with the chip, allowing it to be used for any purpose (UART, I2C, SPI) that the Arduino Pro Mini can. A Raytac MDBT50Q-P1M module is included in the Pro nRF52840 Mini. This module connects the nRF52840 to a trace antenna, fits the IC into an FCC-approved footprint, and includes many of the decoupling and timing mechanisms that a bare nRF52840 design would require. A LiPo battery charger, a Qwiic connector, an on/off switch, a reset switch, and a user LED/button are also included onboard.
Applications:
- Smart home (such as door locks, lighting) sensors and controllers
- Industrial IoT sensors and controllers
- Health/fitness sensor and monitor device
- Wearables with wireless secure payment
Features:
- Low power requirements, ultra-low peak, average and idle mode power consumption.
- Be compatible with a large installed base of mobile phones, tablets, and computers.
- Fully coverage of BLE software stack.
- BLE & RF transmission switching helps products fit all operation systems and most hardware.
Package Includes:
1 x SparkFun Pro nRF52840 Mini - Bluetooth Development BoardQuick specs
- Voltage Rating
- 3.3
- Input Voltage (V)
- 3.3V@600mA
- Processor
- ARM Cortex-M4 CPU BT 5.0 STACK
- Connector Type
- 2 pole JST PH
- Flash Memory
- 1MB
- RAM
- 256 kB



















