
1 / 3 · Click to enlarge
AI Summary
A compact 18-channel light spectroscopy module covering 410nm to 940nm, built around three AS7265x sensors with onboard UV, white and IR LEDs. It connects over Qwiic I2C or 115200bps serial, so you can start measuring without soldering.
Key Highlights
- 18 light frequencies measured from 410nm UV to 940nm IR
- Three AS7265x spectral sensors combined on a single board
- Integrated 405nm UV, 5700K white and 875nm IR illumination LEDs
- Selectable I2C or 115200bps serial interface with AT command set
- Qwiic connectors plus broken-out 0.1 inch pins for breadboards
- Runs from 3.3V at around 5mA with software LED current control
Ideal For
- Makers and students learning practical light spectroscopy
- Electronics developers adding spectral sensing to a project
- Lab and teaching staff building desktop optical experiments
- Product testers comparing surface reflectance and absorption
- Arduino users wanting a Qwiic-ready sensor module
Buying Tip
Confirm your host board runs at 3.3V logic and can use I2C or 115200bps serial before ordering, since the sensor is not 5V tolerant per the stated operating voltage.
Elecvora expert review
Our verdict
A well thought-out module that makes 18-channel light sensing genuinely approachable, with solder-free Qwiic wiring and onboard illumination removing most of the usual setup friction. It is a relative measurement tool rather than a calibrated laboratory instrument, and it is priced and sized accordingly.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 18 channels spanning UV, visible and IR in one board
- Onboard UV, white and IR LEDs with current control
- Qwiic connectors plus breadboard-friendly pins
- Arduino library covers readings and LED control
- Small, light and low power at 3.3V and about 5mA
Cons
- Accuracy of +/-12% limits absolute measurement work
- Requires a 3.3V host and does not include a controller
- Needs consistent sample positioning and lighting for good comparisons
Best for
Makers, students and developers exploring spectral measurement on a desktop
Not ideal for
Users needing a calibrated laboratory-grade photon spectrometer
Specifications
| Model No. / Name | Spectroscopy Sensor |
|---|---|
| Operating Voltage (V) | 3.3 |
| Operating Current (mA) | 5 |
| Interface | I2C |
| Length (mm) | 41.3 |
| Width (mm) | 36 |
| Weight (g) | 5 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
What's in the box
- 1 x SparkFun Triad Spectroscopy Sensor - AS7265x
Frequently Asked Questions
What wavelength range does this sensor cover?
How do I connect it to my board?
What power supply does it need?
Are the illumination LEDs included?
Is a library available?
What comes in the package?
Overview
The SparkFun Triad Spectroscopy Sensor - AS7265x brings practical light spectroscopy to the workbench. Rather than relying on a single detector, the board combines three spectral sensors - the AS72651, AS72652 and AS72653 - so it can characterise light across 18 individual frequencies between 410nm in the ultraviolet and 940nm in the infrared. Onboard 405nm UV, 5700K white and 875nm IR LEDs let you illuminate a surface and observe how it absorbs and reflects those wavelengths.
This is not a laboratory-grade photon spectrometer, and it is not intended to be one. It is an accessible optical inspection tool for measuring and comparing spectral signatures, and it is supplied programmed with the latest firmware from AMS.
Key Features
- 18 channels of light sensing from 410nm to 940nm
- Three AS7265x sensors working as one array
- Integrated UV, white and IR illumination LEDs
- Software control of each LED, including current
- Selectable I2C or 115200bps serial interface
- Qwiic connectors for solder-free I2C wiring
- 0.1 inch spaced pins broken out for breadboard use
- Optional external bulb or illumination control
Specifications Explained
The 3.3V operating voltage and 5mA operating current mean the board draws very little power, so it can share a supply with most microcontroller projects. The I2C interface is the default route for reading measurements, while the serial mode uses an AT command set at 115200bps for setups where I2C is inconvenient.
Sensitivity is specified at 28.6 nW/cm2 per count with an accuracy of +/-12%, which is useful for relative comparisons and material characterisation rather than absolute radiometric calibration. At 41.3mm by 36mm and around 5g, the board is small and light enough to mount in an enclosure or on a test rig.
Compatibility and Requirements
The board needs a 3.3V supply and a host that can talk I2C or serial at 115200bps. Qwiic cables handle the I2C connection without soldering; standard 0.1 inch headers are available if you prefer a breadboard. A fully formed Arduino library is provided for taking readings and controlling the illumination LEDs over the Qwiic I2C interface.
Typical Uses
- Comparing how different materials reflect and absorb light
- Colour and surface analysis in teaching and lab projects
- Building a compact spectrophotometer for desktop experiments
- Adding spectral sensing to environmental or product-testing rigs
- Learning about UV, visible and IR light in one platform
What's in the Box
1 x SparkFun Triad Spectroscopy Sensor - AS7265x.
Quick specs
- Model No. / Name
- Spectroscopy Sensor
- Operating Voltage (V)
- 3.3
- Operating Current (mA)
- 5
- Interface
- I2C
- Length (mm)
- 41.3
- Width (mm)
- 36


















