Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SparkFun Dual Monster Moto Shield VNH3ASP30 is a dual motor driver shield for Arduino that handles two brushed DC motors at 14A continuous and 30A peak per channel. It provides robust protection and current sensing for demanding robotics projects.

Key Highlights

  • Dual VNH3ASP30 full-bridge motor drivers for high-current applications
  • 14A continuous and 30A peak current per channel
  • Operates from 12 to 16VDC for motors and logic
  • PWM frequency up to 20kHz for smooth speed control
  • Current sensing output for Arduino analog pin monitoring
  • Integrated overcurrent, thermal, and battery protection

Ideal For

  • Robotics enthusiasts building high-current motor projects
  • Arduino users needing a robust dual motor driver shield
  • CNC and automation hobbyists
  • Educators teaching motor control with Arduino

Buying Tip

Remember to order 5mm screw terminals separately if you plan to use them, and consider a heat sink for continuous loads above 6A.

Elecvora expert review

Our verdict

The SparkFun Dual Monster Moto Shield VNH3ASP30 offers a significant upgrade over standard L298-based shields, providing higher current capacity and robust protection. It is a solid choice for Arduino users who need to drive two powerful brushed DC motors.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • High current handling (14A continuous, 30A peak per channel)
  • Integrated current sensing and comprehensive protection features
  • Arduino shield form factor for easy integration
  • Screw terminal friendly pitches for larger wires

Cons

  • Screw terminals not included
  • May require additional cooling for sustained high-current use
  • Limited to brushed DC motors, not brushless

Best for

Arduino-based robotics and automation projects with high-current brushed DC motors

Not ideal for

Projects requiring brushless motor control or those without an Arduino-compatible board

Specifications

Item TypeDual Motor Driver
Current Rating (A)14
Voltage Rating (V)12 to 16
Model No. / NameVNH3ASP30
Operating Voltage (VDC)12 ~ 16
Peak Current (A)14
Continuous Discharge Current (A)30
No. of Channels2
Battery Protect. Mode (Y/N)Yes
Overcurrent Protect. (Y/N)Yes
Thermal Protection (Y/N)Yes
PWM frequency20 KHz
LED IndicatorYes
Cooling FanNo
Arduino Shield (Y/N)Yes
Dimensions (L x W x H) mm60 x 54 x 12
Weight (g)19
Shipping Weight0.022 kg
Shipping Dimensions5 × 4 × 1 cm

What's in the box

  • 1 x Dual Monster Moto Shield VNH3ASP30 DC Motor Driver
  • Accessory (as shown in the image)

Frequently Asked Questions

What is the maximum continuous current per channel?
Each channel can handle up to 14A continuous, with a peak of 30A for short durations.
What input voltage does the shield require?
The motor power supply should be between 12 and 16VDC. The logic side is powered by the Arduino.
Are screw terminals included?
No, the 5mm screw terminals are not included. You can purchase them separately or solder wires directly to the board.
Can I use this shield with a 3.3V Arduino?
The shield is designed for 5V Arduino boards. Using it with 3.3V logic may require level shifting, which is not covered in the specifications.
How does current sensing work?
The CS pin outputs approximately 0.13V per amp of output current, which can be read by an Arduino analog pin.
What protections are built in?
The shield includes overcurrent protection, thermal shutdown, and undervoltage/overvoltage shutdown.

Overview

The SparkFun Dual Monster Moto Shield VNH3ASP30 is a high-power motor driver shield for Arduino and compatible boards. It replaces the traditional L298 H-bridge with two VNH3ASP30 full-bridge drivers, allowing you to control two brushed DC motors at high currents. Whether you are building a robot, a CNC machine, or an automated vehicle, this shield provides the muscle needed for demanding motor loads.

Key Features

  • Dual-channel control: Independently drive two brushed DC motors with direction and speed control.
  • High current capacity: Each channel supports 14A continuous and 30A peak current.
  • Wide operating voltage: Works with motor supply voltages from 12 to 16VDC.
  • PWM speed control: Supports PWM frequencies up to 20kHz for smooth, quiet operation.
  • Current sensing: Analog output proportional to motor current (approximately 0.13V per amp) for feedback to your Arduino.
  • Comprehensive protection: Includes overcurrent, thermal shutdown, and battery protection modes.
  • Arduino shield format: Plugs directly onto standard Arduino boards for easy integration.
  • Screw terminal ready: VIN and motor outputs are pitched for 5mm screw terminals (not included) for secure high-current connections.

Specifications Explained

Current rating: The 14A continuous rating means the shield can handle sustained current draw from motors without overheating, while the 30A peak rating covers brief surges during startup or heavy loads. Voltage range: The 12 to 16VDC operating range is suitable for many common DC motors and battery packs. PWM frequency: Up to 20kHz, which is above the audible range for most people, reducing motor noise. Current sense: The CS pins output a voltage proportional to the motor current, allowing you to monitor and limit current in your code. Protection features: Overcurrent, thermal, and battery protection help prevent damage under fault conditions.

Compatibility and Requirements

This shield is designed for Arduino boards with the standard shield footprint. It requires a motor power supply of 12 to 16VDC connected to the VIN terminals. Note that 5mm screw terminals are not included and must be purchased separately if you want to use them; alternatively, wires can be soldered directly to the board. For high-demand applications, additional cooling (heat sink or fan) may be necessary. The shield communicates with the Arduino via INA, INB, and PWM pins for each motor, and the CS pins can be connected to analog inputs.

Typical Uses

This motor driver is well-suited for robotics projects such as differential-drive robots, sumo bots, and automated guided vehicles. It is also useful for CNC routers, camera sliders, and other motorized mechanisms that require precise speed and direction control. The high current capability makes it a good choice for driving gearmotors and larger brushed DC motors.

What's in the Box

Package includes: 1 x Dual Monster Moto Shield VNH3ASP30 DC Motor Driver and accessory (as shown in the image). Screw terminals and other accessories are not included unless specified.

O2YGJ9k

Quick specs

Item Type
Dual Motor Driver
Current Rating (A)
14
Voltage Rating (V)
12 to 16
Model No. / Name
VNH3ASP30
Operating Voltage (VDC)
12 ~ 16
Peak Current (A)
14
See all specifications