
1 / 2 · Click to enlarge
At a glance
This stepper motor drivers is a good fit for makers, students and electronics hobbyists. Main specs: model series Heat Sink, TMC Series; voltage rating (v) 4.75 to 36VDC; model no. / name TMC2208. Check that your power source supplies 4.75 to 36VDC before connecting it.
Key Highlights
- Model Series: Heat Sink, TMC Series
- Voltage Rating (V): 4.75 to 36VDC
- Model No. / Name: TMC2208
Ideal For
- Robots and moving models
- Automation projects
- Replacement for a worn motor
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model Series | Heat Sink, TMC Series |
|---|---|
| Voltage Rating (V) | 4.75 to 36VDC |
| Model No. / Name | TMC2208 |
| Color | Black |
| Input Voltage (VDC) | 4.75 to 36 |
| Size (mm) | 20x15x11 |
| Interface | Stepper driver |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 6 × 6 × 2 cm |
Overview
The TMC2208 Stepper Motor Driver Module Ultra-quiet 256 Subdivisions with Heat Sink is listed in our stepper motor drivers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model Series: Heat Sink, TMC Series
- Voltage Rating (V): 4.75 to 36VDC (match this to your power supply; too high a voltage can damage the part)
- Model No. / Name: TMC2208
- Color: Black
- Input Voltage (VDC): 4.75 to 36 (match this to your power supply; too high a voltage can damage the part)
- Size (mm): 20x15x11 (measure your mounting space before ordering)
- Interface: Stepper driver (confirm your cable or board uses the same connector)
- Shipping Weight: 0.05 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features: 1. Subdivision up to 256; 2. No loss of synchronization when driving with high load; 3. Logic interface level: 3-5V; 4. Input voltage range: 4.75-36V DC; 5. Subdivision mode can Select 2, 4, 8, 16 subdivisions; 6. StealthChop2 can drive the motor to work in extremely quiet conditions, and can control the motor sound below 10dB decibels, and the noise is much lower than the traditional current control method; 7. Traditional stepper In motor drive solutions, there will be an excess current, or current dead zone, when the current crosses zero. At this time, there is no current in the motor coil. This is a major factor causing motor vibration. SpreadCycle ensures that the stepper motor has a smooth transition without dead zone current when it passes through the point. It uses several TMC2208 stepper motor driver chips with almost no jitter; 8. SpreadCycle PWM new wave mode automatically configures a magnetic field between slow and fast attenuators. hysteresis attenuation function. The average current reflects the configured normal current. There will be no transition period when the sine wave crosses the zero point, which reduces the fluctuations of current and torque and makes the current waveform closer to the sine wave. Compared with the traditional constant chopper type, SpreadCycle PWM chopper The motor under wave mode control runs much more smoothly and smoothly.
Package Includes:
1 x TMC2208 stepper motor driver module ultra-quiet 256 subdivisions with heat sinkQuick specs
- Model Series
- Heat Sink, TMC Series
- Voltage Rating (V)
- 4.75 to 36VDC
- Model No. / Name
- TMC2208
- Color
- Black
- Input Voltage (VDC)
- 4.75 to 36
- Size (mm)
- 20x15x11













