
1 / 3 · Click to enlarge
AI Summary
A compact 15A, 500W brushless motor controller board for 15–36V three-phase motors with Hall drive and PWM or voltage speed control. Built-in overload, locked-rotor and over-current protection make it a practical driver for balanced cars and small motion projects.
Key Highlights
- 15A continuous current rating with 500W power capacity
- Wide 15–36V DC input range for flexible builds
- Hall sensor drive for three-phase brushless motors
- Voltage or PWM speed regulation options
- Overload, locked-rotor and over-current protection
- Compact 62 x 42.5 x 17 mm board weighing 29 g
Ideal For
- Makers building balanced cars and self-balancing platforms
- Robotics hobbyists needing a compact three-phase driver
- Electronics students prototyping brushless motor control
- Technicians replacing a small 15–36V motor driver
- DIY builders working with Hall-equipped brushless motors
Buying Tip
Check that your motor is a three-phase brushless type and that your supply stays within 15–36V before wiring, and be prepared to tune the board's resistance and capacitance if starting or speed stability is poor.
Elecvora expert review
Our verdict
A neat, lightweight brushless driver for modest 15–36V projects, with useful protection and both voltage and PWM speed control. It is best treated as an adjustable board that may need tuning to match a specific motor rather than a plug-and-play unit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact 62 x 42.5 x 17 mm board at just 29 g
- 15A and 500W rating suits moderate brushless motors
- Hall drive plus voltage or PWM speed control
- Overload, locked-rotor and over-current protection
Cons
- Not guaranteed to drive every sensorless three-phase motor directly
- May require resistance and capacitance adjustment for smooth starting
- No motor or wiring accessories included
Best for
Balanced car builds and small brushless motor projects within 15–36V
Not ideal for
High-power motors exceeding 15A or 500W, or users wanting plug-and-play operation without tuning
Specifications
| Current Rating (A) | 15 |
|---|---|
| Voltage Rating (V) | 15 to 36 |
| Operating Temperature (°C) | -40 ~ +85 |
| Size (mm) | 62 x 42.5 x 17 |
| Current Capacity (A) | 15 |
| Power Capacity (W) | 500 |
| Length (mm) | 60 |
| Weight (g) | 29 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 7 × 5 × 1 cm |
What's in the box
- 1 x DC15V–36V 15A 500W brushless motor controller board
Frequently Asked Questions
What type of motor does this controller drive?
What input voltage and current does it need?
How is motor speed controlled?
What happens if the motor starts poorly or runs unevenly?
What protection features are included?
What is included with the controller?
Overview
This brushless motor controller board is a compact driver for three-phase motors operating from a 15–36V DC supply. It is rated at 15A and 500W, and includes Hall drive for motors fitted with Hall sensors. The board measures approximately 62 x 42.5 x 17 mm and weighs only 29 g, so it suits builds where space and weight are tight, such as balanced cars and small robotic platforms.
Speed can be controlled either by varying the input voltage or by feeding a PWM signal from a single-chip microcomputer. Protection features cover overload, locked rotor and over-current conditions, helping to reduce the risk of damage during stalls or heavy loads.
Key Features
- 15A, 500W rating: handles moderate-power three-phase brushless motors.
- 15–36V DC input: works across common hobby and small-vehicle battery voltages.
- Hall drive: supports motors equipped with Hall position sensors.
- Dual speed control: voltage regulation or PWM input from a microcontroller.
- Protection set: overload, locked-rotor and over-current protection.
- Compact footprint: 62 x 42.5 x 17 mm at 29 g.
Specifications Explained
The 15A current rating defines the continuous load the board is built to handle, while the 500W figure reflects the power it can deliver within the 15–36V range. The wide voltage window means the same board can be used with different DC supplies as long as they stay inside that range.
An operating temperature range of -40 to +85°C covers typical indoor and outdoor electronics environments. The small 62 x 42.5 x 17 mm dimensions and 29 g weight make mounting straightforward in tight enclosures.
Compatibility and Requirements
This controller is intended for three-phase brushless motors and is not guaranteed to drive every sensorless three-phase motor directly. If the motor starts with jitter, runs in reverse, draws excessive no-load current, holds speed poorly or runs inefficiently, the resistance and capacitance on the board can be adjusted to improve the match. A suitable DC supply within 15–36V and a speed-control source, either a variable voltage or a PWM signal, are required. The motor must be compatible with Hall drive if Hall feedback is to be used.
Typical Uses
- Balanced car and self-balancing vehicle projects
- Small robotic drive systems
- Custom brushless motor test rigs
- Prototyping and educational electronics builds
- Repair or replacement of a compact motor driver
What's in the Box
1 x DC15V–36V 15A 500W brushless motor controller board.
Quick specs
- Current Rating (A)
- 15
- Voltage Rating (V)
- 15 to 36
- Operating Temperature (°C)
- -40 ~ +85
- Size (mm)
- 62 x 42.5 x 17
- Current Capacity (A)
- 15
- Power Capacity (W)
- 500













