Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dual H-bridge module based on the DRV8833 IC that drives two DC motors or one stepper from 2.7–10.8 V. It offers 1.2 A continuous per channel with 2 A peaks and works with 3 V or 5 V logic inputs.

Key Highlights

  • Dual H-bridge drives two DC motors or one bipolar stepper
  • Wide 2.7 V to 10.8 V motor supply range
  • 1.2 A continuous, 2 A peak per channel
  • Paralleled outputs deliver 2.4 A continuous to one motor
  • 3 V and 5 V compatible logic inputs
  • Reverse-voltage, over-current and over-temperature protection

Ideal For

  • Makers building small wheeled robots
  • RC hobbyists needing compact motor control
  • Students learning about H-bridge drivers
  • Engineers prototyping stepper or DC motor systems

Buying Tip

Check that your motor’s continuous current draw stays within 1.2 A per channel, or parallel the outputs if you need up to 2.4 A for a single motor.

Elecvora expert review

Our verdict

A compact and well-protected dual motor driver that is easy to integrate into low-voltage projects. It offers a good balance of current capability and simplicity for its size.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 2.7–10.8 V operating range
  • 1.2 A continuous per channel with 2 A peaks
  • Paralleling for higher single-motor current
  • 3 V and 5 V logic compatible
  • Reverse-voltage and thermal protection

Cons

  • Current limiting requires adding sense resistors
  • Pin headers need soldering
  • Not suitable for motors drawing more than 1.2 A continuous per channel without paralleling

Best for

Small robots and low-voltage motor projects

Not ideal for

High-power motors or applications needing more than 2.4 A continuous

Specifications

Model SeriesDRV Series
Voltage Rating (V)2.7 to 10.8VDC
Current Rating (A)1.2 to 2
Width (mm)18
Weight (g)5
Shipping Weight0.01 kg
Shipping Dimensions9 × 7 × 2 cm

What's in the box

  • 1 x DRV8833 2-Channel DC Motor Driver Module
  • 12 x Pin Headers

Frequently Asked Questions

Can I drive two motors independently with this module?
Yes, the dual H-bridge design allows independent bidirectional control of two brushed DC motors.
What is the maximum motor supply voltage?
The module operates from 2.7 V to 10.8 V DC. Do not exceed 10.8 V.
How much current can each channel handle?
Each channel supports 1.2 A continuous and up to 2 A peak for short durations.
Can I drive a stepper motor with this board?
Yes, it can drive one bipolar stepper motor using both channels.
Does the module include current limiting?
Current limiting is optional and requires adding sense resistors, which are not included.
What is included in the package?
You receive one DRV8833 2-Channel DC Motor Driver Module and 12 pin headers.

Overview

The DRV8833 2-Channel DC Motor Driver Module is a ready-to-use breakout board for the DRV8833 dual H-bridge IC. It provides bidirectional control for two brushed DC motors or one bipolar stepper motor, making it a versatile building block for small robotics and automation projects. The board accepts a motor supply from 2.7 V to 10.8 V and is populated with SMD components, including an FET for reverse-battery protection.

Key Features

  • Dual H-bridge: independently drive two DC motors or a single stepper.
  • Current capability: 1.2 A continuous per channel, with 2 A peaks for short bursts.
  • Paralleling option: combine outputs to deliver 2.4 A continuous (4 A peak) to one motor.
  • Logic-friendly inputs: compatible with 3 V and 5 V systems, no separate logic supply needed.
  • Integrated protection: under-voltage lockout, over-current and over-temperature shutdown, plus reverse-voltage protection.
  • Optional current limiting: add sense resistors (not included) to enable it.

Specifications Explained

The 2.7–10.8 V rating means the module suits small motors and low-voltage battery packs commonly used in portable projects. Continuous current of 1.2 A per channel covers many hobby motors, while the 2 A peak rating allows brief surges during startup or load spikes. Paralleling the two channels doubles the continuous current to 2.4 A for a single motor, useful when you need more torque from one drive. The compact 18 mm width and 5 g weight make it easy to fit into tight builds. Because the inputs accept 3 V and 5 V logic, you can connect it directly to most microcontrollers without level shifting.

Compatibility and Requirements

The module requires a DC motor supply within 2.7–10.8 V and logic-level control signals from your microcontroller. It works with 3 V and 5 V logic. No external logic voltage is needed. To use current limiting, you must add sense resistors, which are not included. The package includes the driver module and pin headers for soldering.

Typical Uses

This driver is well suited to small wheeled robots, RC vehicles, camera sliders, and other projects needing compact bidirectional motor control. It can also drive a bipolar stepper in light-duty positioning tasks. Its protection features make it a forgiving choice for beginners and a reliable component for experienced makers.

What's in the Box

  • 1 x DRV8833 2-Channel DC Motor Driver Module
  • 12 x Pin Headers

Quick specs

Model Series
DRV Series
Voltage Rating (V)
2.7 to 10.8VDC
Current Rating (A)
1.2 to 2
Width (mm)
18
Weight (g)
5
Shipping Weight
0.01 kg
See all specifications