
1 / 3 · Click to enlarge
AI Summary
A single axis TB6560 driver board that controls one 2 or 4 phase stepper motor up to 3A from a 10–35VDC supply. Adjustable current and semi-flow settings plus optocoupler-isolated inputs make it a practical building block for CNC routers and precision mechanisms.
Key Highlights
- Single axis TB6560AHQ driver rated 3A at 10 to 35VDC
- 6N137 high-speed optocoupler isolation on input signals
- Adjustable current level and automatic semi-flow decay settings
- Excitation modes: full step, half step, 1/8 step and 1/16 step
- Thick fine-toothed heatsink for sustained heat dissipation
- Setup instructions printed directly on the board
Ideal For
- CNC router builders wiring a single axis
- Hobbyists driving 42, 57 or 86 frame steppers under 3A
- Makers pairing a driver with an Arduino-class controller
- Small workshops building precision positioning mechanisms
- Anyone replacing or adding one axis of stepper control
Buying Tip
Check your motor's rated current before ordering: this board is limited to 3A, so motors above that rating need a different driver.
Elecvora expert review
Our verdict
A tidy, well-protected single axis driver for small CNC builds, with isolation and on-board settings that make tuning straightforward. It is a sensible choice when one motor needs a compact, cooled driver within the 3A limit.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Optocoupler isolation protects the control side
- Adjustable current and semi-flow settings on board
- Selectable microstepping up to 1/16
- Finned heatsink supports longer runs
- Setup instructions printed on the PCB
Cons
- Single axis only, so multi-axis builds need several boards
- Not suitable for motors drawing more than 3A
- Requires a separate DC supply and signal source
Best for
Hobbyist CNC routers and single axis positioning projects within 3A
Not ideal for
Multi-axis systems needing one integrated controller or motors above 3A
Specifications
| Model Series | CNC Oriented, TB Series |
|---|---|
| Voltage Rating (V) | 10 to 35VDC |
| Current Rating (A) | 3 |
| Length (mm) | 50 |
| Width (mm) | 75 |
| Weight (g) | 72 |
| Shipping Weight | 0.078 kg |
| Shipping Dimensions | 9 × 6 × 5 cm |
What's in the box
- 1 x TB6560 Driver Board
Frequently Asked Questions
What voltage supply does this board need?
Which stepper motors can I use?
How many axes can one board control?
Can I change the step resolution?
What comes in the package?
How do I keep the board cool?
Overview
The TB6560 Driver Board is a single axis stepper motor controller built around the TB6560AHQ chip. It sits between your CNC controller or microcontroller and one stepper motor, translating step and direction signals into controlled coil current. With a 10 to 35VDC input range and a 3A output rating, it suits the 42, 57 and 86 frame motors commonly found on small routers, engravers and positioning mechanisms.
Input signals pass through 6N137 high-speed optocouplers, which keep the control side electrically separated from the motor side and help preserve step accuracy at higher pulse rates. The compact board measures roughly 50 by 75 mm and weighs about 72 g, so it fits neatly into a control enclosure.
Key Features
- TB6560AHQ chip with low-voltage shutdown, overheat stop and overcurrent protection circuits.
- Adjustable current level to match the rating of your motor.
- Automatic semi-flow with selectable semi-flow mode and semi-flow current settings.
- Excitation modes of synchronizing, half step, 1/8 step and 1/16 step, up to 16 segments.
- Thick fine-toothed heatsink for effective heat dissipation during longer runs.
- Printed setup instructions on the board itself.
Specifications Explained
Voltage (10–35VDC): the board needs a DC supply inside this window. Stay within it, since the chip includes low-voltage shutdown protection.
Current (3A): this is the maximum output. Use motors rated at or below 3A; the board is not intended for motors drawing more than that.
Adjustable current and semi-flow: the current setting lets you dial the drive level to your motor, while semi-flow reduces holding current when the motor is idle, which keeps things cooler.
Microstepping: selecting finer steps such as 1/8 or 1/16 gives smoother motion and finer resolution than full or half step.
Compatibility and Requirements
The board works with 2 phase, 4 wire and 6 wire stepper motors rated within 3A, including 42, 57 and 86 frame sizes. Motors above 3A are not supported. You will need a suitable DC power supply within the 10 to 35VDC range and a step and direction signal source such as a CNC controller or microcontroller.
Typical Uses
- Single axis motion on a CNC router or engraving machine
- Driving one stepper in a precision mechanical system
- Bench projects pairing a driver board with an Arduino-class controller
- Retrofits and small builds where one axis needs independent control
What's in the Box
1 x TB6560 Driver Board.
Quick specs
- Model Series
- CNC Oriented, TB Series
- Voltage Rating (V)
- 10 to 35VDC
- Current Rating (A)
- 3
- Length (mm)
- 50
- Width (mm)
- 75
- Weight (g)
- 72
















