
1 / 4 · Click to enlarge
AI Summary
A single-axis TB6600 stepper driver that runs from 9 to 42VDC and delivers up to 4A to 42, 57 and 86 frame motors. Six DIP switches set micro-stepping and current, while opto-isolated inputs keep control signals clean.
Key Highlights
- Single-axis driver for two-phase and four-phase stepper motors
- Wide 9 to 42VDC input range with up to 4A output
- Micro-step settings from 1 up to 32 for fine resolution
- Six DIP switches for current and micro-step selection
- Opto-isolated signal inputs for better noise immunity
- Semi-enclosed casing for tougher workshop environments
Ideal For
- CNC router and engraver builders adding a driven axis
- Arduino and microcontroller users working on motion projects
- Makers driving 42, 57 or 86 frame stepper motors
- Workshops upgrading to adjustable micro-stepping
- DIY automation and positioning stage projects
Buying Tip
Check your motor's rated current and wire it for the correct coil configuration before setting the DIP switches, and confirm your power supply stays within 9 to 42VDC.
Elecvora expert review
Our verdict
The TB6600 is a straightforward, adjustable single-axis driver that covers a useful voltage and current range for hobby and small-shop CNC work. Its DIP-switch setup and isolated inputs make it approachable without extra configuration software.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 9 to 42VDC input range
- Adjustable current up to 4A peak
- Micro-step options up to 32
- Opto-isolated signal inputs
- Simple DIP-switch configuration
Cons
- Requires a separate DC power supply
- No wiring or motor included
- Settings must be matched manually to the motor
Best for
CNC and motion projects needing one adjustable stepper axis
Not ideal for
Users wanting a plug-and-play, fully enclosed controller kit
Specifications
| Model Series | CNC Oriented, TB Series |
|---|---|
| Voltage Rating (V) | 9 to 42VDC |
| Current Rating (A) | 5 |
| Input Voltage (VDC) | 9 ~ 42 |
| Control Signal Voltage (V) | 3.3 to 24 |
| Output Power (W) | 160 |
| Supply Current | 0 to 5 |
| Output Current (A) | 3.3 to 24 |
| Micro Step | 1, 2A, 2B, 8, 16, 32 |
| Operating Temperature (°C) | -10 to 50 |
| Length (mm) | 100 |
| Width (mm) | 70 |
| Weight (g) | 150 |
| Shipping Weight | 0.2 kg |
| Shipping Dimensions | 13 × 8 × 5 cm |
What's in the box
- 1 x Two Trees TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
Frequently Asked Questions
What motors can this driver control?
What power supply do I need?
Can I use it with an Arduino?
How do I change the current and micro-step settings?
Is the driver protected from electrical noise?
What is included with the driver?
Overview
The Two Trees TB6600 is a compact single-axis stepper motor driver for CNC routers, engravers and other motion projects. It takes a 9 to 42VDC supply and controls two-phase stepping motors through a standard pulse and direction interface. Because the control inputs accept 3.3 to 24V signals, it can be paired with Arduino boards and other microcontrollers that output a digital pulse.
Key Features
- H-bridge bipolar constant current drive
- Output current selectable up to 4A peak
- Micro-step modes including 1, 2A, 2B, 8, 16 and 32
- Six DIP switches for current and micro-step setup
- High-speed optocoupler isolation on all signal terminals
- Offline retention and automatic half-current lock functions
- Semi-enclosed casing for demanding environments
Specifications Explained
The 9 to 42VDC input range covers a broad set of power supplies, so you can match voltage to the motor and machine rather than the driver. Current is adjustable, with a peak output of 4A, which suits many common stepper motors. Higher micro-step values such as 16 or 32 produce smoother, quieter movement and finer positioning, while lower values keep torque and speed higher. The 3.3 to 24V control signal range means the driver tolerates different logic levels from your controller. Rated output power is 160W, and the unit operates between -10 and 50°C.
Compatibility and Requirements
The driver is intended for 42, 57 and 86 type two-phase and four-phase hybrid stepper motors, including 4-wire, 6-wire and 8-wire versions. It needs a separate DC power supply within the 9 to 42V range and a controller that provides pulse and direction signals. Wiring and DIP switch settings must be matched to the motor before use.
Typical Uses
Common applications include CNC machine axes, engraving machines, automated positioning stages and DIY motion projects built around Arduino or similar controllers. The single-axis format makes it easy to add one driven axis at a time.
What's in the Box
One Two Trees TB6600 stepper motor driver controller is included. Power supply, motor and signal wiring are not included.
Quick specs
- Model Series
- CNC Oriented, TB Series
- Voltage Rating (V)
- 9 to 42VDC
- Current Rating (A)
- 5
- Input Voltage (VDC)
- 9 ~ 42
- Control Signal Voltage (V)
- 3.3 to 24
- Output Power (W)
- 160













