
1 / 4 · Click to enlarge
AI Summary
This ULN2003A driver module amplifies microcontroller signals to control small stepper motors like the 28BYJ-48. Its XH-5P socket and 4-way indicators make setup quick and monitoring easy.
Key Highlights
- ULN2003A chip amplifies control signals for stepper motors
- Operates from 5 to 12VDC for flexible project power
- 4-way signal indicator shows input status at a glance
- XH-5P socket connects directly to 28BYJ-48 stepper
- Compact 18mm width and 3g weight for tight spaces
- All pins have input leads for easy wiring
Ideal For
- Arduino hobbyists and makers
- Students learning motor control
- Robot builders using small stepper motors
- DIY camera slider and automation projects
- Educators creating electronics workshops
Buying Tip
Pair this module with a 28BYJ-48 stepper motor and ensure your power supply matches the motor's voltage rating for reliable operation.
Elecvora expert review
Our verdict
A simple, low-cost solution for driving small stepper motors with microcontroller signals. It is well-suited for beginners and compact projects where space and budget are tight.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very affordable and widely available
- Easy to use with clear input leads and socket
- Compact and lightweight
- Onboard indicators help troubleshooting
Cons
- Limited to small stepper motors like 28BYJ-48
- No onboard voltage regulation; requires external supply
- PCB colour may vary from images
Best for
Small robotics and automation projects using 28BYJ-48 motors
Not ideal for
High-power or larger stepper motors requiring higher current
Specifications
| Model Series | ULN Series |
|---|---|
| Voltage Rating (V) | 5 to 12VDC |
| Width (mm) | 18 |
| Weight (g) | 3 |
| Shipping Weight | 0.05 kg |
| Shipping Dimensions | 4 × 3 × 2 cm |
What's in the box
- 1 x ULN2003A Driver Module Stepper Motor Driver (Blue)
Frequently Asked Questions
What stepper motors can this module drive?
What power supply voltage does it need?
Can I use it with Arduino?
Does it come with a stepper motor?
What are the signal indicators for?
How do I control the motor's speed and position?
Overview
The ULN2003A Driver Module is a small, lightweight stepper motor driver board that uses the ULN2003A chip to amplify control signals from a microcontroller. It is commonly used to drive small stepper motors such as the 28BYJ-48, converting pulse signals into precise angular movement. The board is compact, easy to use, and suitable for a wide range of DIY electronics projects.
Key Features
- ULN2003A driver chip: Provides reliable amplification of low-current control signals.
- 4-way signal indicator: LEDs show the status of each input channel for easy monitoring.
- XH-5P socket: Allows direct connection of a 28BYJ-48 stepper motor without additional wiring.
- Input leads: All pins are broken out for simple hookup to your controller.
- Compact size: At only 18mm wide and 3g, it fits into space-constrained builds.
Specifications Explained
Voltage rating (5 to 12VDC): The module accepts a wide range of input voltages, making it compatible with common 5V logic systems and 12V power supplies. Ensure your motor is rated for the voltage you apply.
Width (18mm) and weight (3g): The small footprint and low weight mean the module can be mounted on small chassis or inside tight enclosures without adding noticeable bulk.
Model series (ULN Series): Indicates the use of the ULN2003A Darlington transistor array, a standard choice for driving inductive loads like stepper motor coils.
Compatibility and Requirements
The module is designed to work with the 28BYJ-48 stepper motor via its XH-5P socket. It requires a separate power supply within the 5 to 12VDC range and control signals from a microcontroller (such as Arduino). No additional drivers are needed for basic operation. Note that the PCB colour may vary depending on the manufacturer.
Typical Uses
- Driving 28BYJ-48 stepper motors in robotics and automation projects
- Camera sliders and pan-tilt mechanisms
- Small CNC or 3D printer accessories
- Educational kits and Arduino experiments
- Automated desk toys and displays
What's in the Box
1 x ULN2003A Driver Module Stepper Motor Driver (Blue PCB).

Quick specs
- Model Series
- ULN Series
- Voltage Rating (V)
- 5 to 12VDC
- Width (mm)
- 18
- Weight (g)
- 3
- Shipping Weight
- 0.05 kg
- Shipping Dimensions
- 4 × 3 × 2 cm
















