Skip to main content

Worldwide Shipping · Secure Payments

At a glance

This stepper motor drivers is a good fit for everyday home and hobby use. Main specs: model series MACH3 Interfacer; output pulse 100K; linkage control Supports up to 4- axis.

Key Highlights

  • Rechargeable over USB
  • Model Series: MACH3 Interfacer
  • Output pulse: 100K
  • Linkage control: Supports up to 4- axis

Ideal For

  • Robots and moving models
  • Automation projects
  • Replacement for a worn motor

Buying Tip

Read the full specifications and the package contents list below to make sure it does what you need.

Specifications

Model SeriesMACH3 Interfacer
Output pulse100K
Linkage controlSupports up to 4- axis
Compatibilitywindows 7/8/10
SupportedAutomatic Knife
Shipping Weight0.14 kg
Shipping Dimensions18 × 13 × 1 cm

Overview

The Two Trees USB Interface MACH3 Motion Control Card Flying Carving Card +USB Cable+CD is listed in our stepper motor drivers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model Series: MACH3 Interfacer (confirm your cable or board uses the same connector)
  • Output pulse: 100K
  • Linkage control: Supports up to 4- axis (confirm your cable or board uses the same connector)
  • Compatibility: windows 7/8/10
  • Supported: Automatic Knife (confirm your cable or board uses the same connector)
  • Shipping Weight: 0.14 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 18 × 13 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is Two Trees USB Interface MACH3 Motion Control Card Flying Carving Card +USB Cable+CD. If you're tired of needing a parallel port and an outdated PC to run Mach3, this is the solution you've been waiting for! Our newest interface board runs through any standard USB port for communication. You simply need to install the card's plugin for Mach3 and follow the setup instructions. This Mach3 USB Controller will run Mach3 through a standard USB port on a PC. You can use Windows 10 and older Windows version 32-bit or 64-bit.

Connection Diagram:


Features and Specifications:

  1. Supports up to 4- axis linkage control. The fourth axis can be set as driven axis
  2. Output pulse 100K , using the smallest error interpolation algorithm, high precision machining
  3. USB interface for any PC compatible computer with USB interface for netbooks, laptops, desktops, and tablets
  4. Compatible in windows 7/8/10.
  5. Drive-free design, to better compatible with a variety of hardware and software environment
  6. Support auto-zero
  7. The driven shaft automatically adjusts to zero
  8. Support automatic knife
  9. Support emergency stop input
  10. Support limit switch access
  11. Support spindle control (PWM mode and relay mode)
  12. Provides 4 channels with optocoupler isolation digital signal input
  13. Provides up to 12 digital signal input
  14. provides 4 channels with optocoupler isolation relay output
  15. Support hand wheel interface
  16. Anti-jamming design, the import of industrial components assembly, high reliability

Package Includes:

1 x Two Trees USB Interface MACH3 Motion Control Card Flying Carving Card +USB Cable+CD

Quick specs

Model Series
MACH3 Interfacer
Output pulse
100K
Linkage control
Supports up to 4- axis
Compatibility
windows 7/8/10
Supported
Automatic Knife
Shipping Weight
0.14 kg
See all specifications