
1 / 4 · Click to enlarge
AI Summary
The SparkFun OpenLog Artemis is an open-source data logger that auto-detects Qwiic sensors and writes readings to microSD as plain CSV text. Its deep-sleep draw of about 18 µA makes long unattended logging sessions practical.
Key Highlights
- Open-source logger auto-detects and configures Qwiic sensors
- Logs to microSD as plain comma-separated text files
- 14-bit ADC samples at up to 1900 Hz, 2 V maximum
- Logging from 500 readings per second to one every 24 hours
- Deep sleep current around 18 µA with regulator shut down
- USB-C setup at 115200 bps with built-in LiPo charger
Ideal For
- Engineers running long-term sensor data studies
- Makers building Qwiic-based logging projects
- Students learning data acquisition and serial interfaces
- Field researchers collecting GPS or environmental readings
- Developers recording serial output from embedded devices
Buying Tip
Order a microSD card formatted to FAT32 (or exFAT with firmware 1.11+) plus a USB-C cable at the same time, since neither is included.
Elecvora expert review
Our verdict
The OpenLog Artemis removes most of the friction from sensor logging: it auto-detects Qwiic hardware, writes readable CSV files and sleeps at very low current. It suits anyone who wants reliable data capture without writing firmware, provided they supply their own card, cable and power source.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Automatic Qwiic sensor detection and configuration
- Plain CSV output on microSD, easy to analyse
- Wide logging range from 500 Hz to once per day
- Very low deep-sleep current for long deployments
- Onboard LiPo charger and backed-up RTC
Cons
- microSD card, USB-C cable and battery are not included
- Analog inputs are limited to 2 V maximum
- Advanced use requires reading the open-source documentation
Best for
Makers and engineers who need unattended sensor or serial logging with minimal coding
Not ideal for
Users wanting a finished, enclosed logger with battery and storage bundled
Specifications
| Item Type | Other IoT Boards |
|---|---|
| Operating Voltage (VDC) | 3.3-6.5V |
| USB Voltage | 5 V |
| USB | Type C |
| Analog To Digital Port | 14-bit, up to 1900Hz, 2V max |
| Current consumption | ~20mA (Run) ~80µA (Sleep) ~18µA (Deep Sleep - regulator shut down) |
| Length (mm) | 33 |
| Weight (g) | 5.3 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 7 × 5 × 1 cm |
What's in the box
- 1 x SparkFun OpenLog Artemis
Frequently Asked Questions
What sensors can the OpenLog Artemis log?
What microSD card formats are supported?
How is the board powered?
How much current does it draw?
What comes in the package?
How do I connect to configure it?
Overview
The SparkFun OpenLog Artemis, part number DEV-16832, is an open-source data logger for capturing sensor and serial data with minimal setup. It arrives preprogrammed, so you can connect a USB-C cable, open a terminal at 115200 bps and start working. Readings are streamed to the terminal and simultaneously written to a microSD card as clear, comma-separated text files that open directly in a spreadsheet or analysis script.
The board automatically detects, configures and logs Qwiic sensors, and it can also record IMU, GPS and various pressure, humidity and distance sensors. Configuration happens over a simple serial interface, so no custom firmware is required for basic logging.
Key Features
- Automatic detection and configuration of Qwiic sensors
- microSD logging in FAT16, FAT32 and, from firmware 1.11, exFAT
- 14-bit ADC with sampling up to 1900 Hz and a 2 V maximum input
- Logging rates from 500 readings per second down to one every 24 hours
- Very low power operation: about 20 mA running, 80 µA sleeping and 18 µA in deep sleep with the regulator shut down
- Built-in MCP73831 single-cell LiPo charger and an RTC with 1 mAh battery backup
Specifications Explained
The 3.3–6.5 V operating range gives you flexibility in how you power the board, while the USB-C port expects 5 V. The 14-bit ADC is the heart of analog logging: 14-bit resolution captures fine changes in a signal, 1900 Hz suits fast-changing inputs, and the 2 V maximum means analog sources above that level need attention before connection.
Power figures matter for unattended deployments. At roughly 20 mA while running, the board is modest, but sleep and deep sleep draw of about 80 µA and 18 µA respectively let it stretch a small battery across long gaps between readings. The RTC with 1 mAh backup keeps time consistent, and the onboard MCP73831 charger lets a single-cell LiPo be recharged through the board.
Physically the logger measures 33 mm in length and weighs just 5.3 g, so it fits into small enclosures and lightweight builds.
Compatibility and Requirements
Use a microSD card formatted as FAT16 or FAT32 up to 32 GB, or exFAT with firmware version 1.11 or later. Qwiic sensors connect through the board's Qwiic interface and are detected automatically. You will need a USB-C cable and a serial terminal set to 115200 bps for configuration and live output.
Typical Uses
- Long-duration environmental logging with pressure, humidity or distance sensors
- Motion and orientation capture using IMU data
- GPS track and position logging
- Recording serial output from other devices
- Student and maker projects that need CSV data without firmware work
What's in the Box
One SparkFun OpenLog Artemis board. microSD card, USB-C cable and battery are not included.

Quick specs
- Item Type
- Other IoT Boards
- Operating Voltage (VDC)
- 3.3-6.5V
- USB Voltage
- 5 V
- USB
- Type C
- Analog To Digital Port
- 14-bit, up to 1900Hz, 2V max
- Current consumption
- ~20mA (Run) ~80µA (Sleep) ~18µA (Deep Sleep - regulator shut down)



















