
1 / 3 · Click to enlarge
At a glance
Made by SparkFun, this advance development boards is a good fit for makers, students and electronics hobbyists. Main specs: item type Development Board; input voltage (v) 3.3; microcontroller chip Arm® Cortex®-M4F Microcontroller. Check that your power source supplies 3.3 before connecting it.
Key Highlights
- Item Type: Development Board
- Input Voltage (V): 3.3
- Microcontroller Chip: Arm® Cortex®-M4F Microcontroller
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Development Board |
|---|---|
| Input Voltage (V) | 3.3 |
| Microcontroller Chip | Arm® Cortex®-M4F Microcontroller |
| Max. Clock Frequency (MHz) | 80 |
| SRAM | 512 KB |
| Interface Type | I2C |
| USB | USB Type-C |
| Length (mm) | 70 |
| Width (mm) | 24 |
| Weight (g) | 8 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 9.5 × 6 × 1 cm |
Overview
The SparkFun DEV-17273 QuickLogic Thing Plus - EOS S3, made by SparkFun, is listed in our advance development boards range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Development Board
- Input Voltage (V): 3.3 (match this to your power supply; too high a voltage can damage the part)
- Microcontroller Chip: Arm® Cortex®-M4F Microcontroller (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Max. Clock Frequency (MHz): 80 (make sure the rest of your system works at this frequency)
- SRAM: 512 KB
- Interface Type: I2C (confirm your cable or board uses the same connector)
- USB: USB Type-C
- Length (mm): 70 (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The SparkFun DEV-17273 QuickLogic Thing Plus is a small form factor system ideal for enabling the next generation of low-power Machine Learning (ML) devices. The QuickLogic Thing Plus is powered by QuickLogic’s EOS S3, the first FPGA-enabled Arm Cortex©-M4F MCU to be fully supported with Zephyr RTOS and FreeRTOS. Unlike other development boards which are based on proprietary hardware and software tools, the QuickLogic Things Plus is based on 100% open-source hardware, compatible with the Feather form factor, and is built around 100% open source software (with support for FreeRTOS, Zephyr, Minden, Docker, and SymbiFlow).
Between the onboard LiPo battery connector and charging circuitry, wake-on-sound PDM microphone, and low-power, three-axis accelerometer, this Thing Plus board is ideal for wearable, voice, gesture sensing applications. The strong firmware support for the microphone and accelerator makes it easy to move sensor data into the embedded FPGA. From there, you can use SensiML, TensorFlow Lite, or other tools to train and run embedded machine learning algorithms specific to your application. The board also includes a Qwiic connector to quickly interface with an ecosystem of 150+ I2C-compatible boards such as sensors, RFID readers, displays, keypads, and relays.
Features:
- Single Cell LiPo battery
- On-board charging circuitry - Microchip MCP73831/2
- Standard LiPo JST connector
- SWD programming connector for use with USB-TTL converter
- USB data signals are tied to eFPGA programmable logic
- UART available via I/O headers
Package Includes:
1 x SparkFun QuickLogic Thing Plus - EOS S3Quick specs
- Item Type
- Development Board
- Input Voltage (V)
- 3.3
- Microcontroller Chip
- Arm® Cortex®-M4F Microcontroller
- Max. Clock Frequency (MHz)
- 80
- SRAM
- 512 KB
- Interface Type
- I2C



















