Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact Feather-footprint development board built on the RP2040 microcontroller, with 16MB flash, 264KB SRAM and a Qwiic connector. The onboard JST battery connector with charging circuit and fuel gauge makes portable, battery-powered projects straightforward.

Key Highlights

  • RP2040 microcontroller running at up to 133 MHz
  • 16 MB flash memory and 264 KB SRAM
  • Feather footprint with 18 GPIO pins
  • Qwiic connector for quick I2C sensor hookup
  • JST single-cell battery connector with charging circuit and fuel gauge
  • Onboard WS2812 addressable RGB LED and SD card slot

Ideal For

  • Makers building compact sensor and data-logging projects
  • Embedded developers prototyping with the RP2040
  • Students learning microcontroller programming
  • Engineers adding Qwiic modules to a small board
  • Hobbyists creating battery-powered portable gadgets

Buying Tip

Check that your project needs the Feather footprint and Qwiic ecosystem before buying, since the board ships without a USB cable or battery.

Elecvora expert review

Our verdict

The Thing Plus RP2040 balances a small Feather footprint with unusually generous 16 MB flash and useful onboard extras like Qwiic and battery charging. It is a practical choice for portable, sensor-heavy builds where you want to avoid extra wiring.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 16 MB flash gives ample room for firmware and data
  • Qwiic connector simplifies I2C sensor hookup
  • Battery connector includes charging circuit and fuel gauge
  • Compact 90 x 25 mm board with four mounting holes

Cons

  • No USB cable or battery included
  • Requires soldering for header pins and non-Qwiic wiring
  • Limited to the interfaces and memory the RP2040 provides

Best for

Makers and developers building compact, battery-powered RP2040 projects

Not ideal for

Users who need an all-in-one kit with cable and battery included

Specifications

Item TypeDevelopment Board
Microcontroller ChipRP2040
Flash Memory16 MB
SRAM264 KB
Max. Clock Frequency (MHz)133
Length (mm)90
Width (mm)25
Weight (g)7.81
Shipping Weight0.01 kg
Shipping Dimensions9 × 5 × 1 cm

What's in the box

  • 1 x SparkFun Thing Plus - RP2040

Frequently Asked Questions

What microcontroller does this board use?
It uses the Raspberry Pi Foundation's RP2040 microcontroller, running at a maximum clock frequency of 133 MHz.
How much memory is available?
The board includes 16 MB of flash memory and 264 KB of SRAM in six banks.
Can I connect I2C sensors easily?
Yes. The onboard Qwiic connector lets you attach compatible I2C modules without soldering.
How is the board powered?
It can run from USB or from a single-cell battery connected to the JST connector, which has an onboard charging circuit and fuel gauge.
What is included in the box?
The package contains one SparkFun Thing Plus - RP2040 board. A USB cable and battery are not included.
Does it have mounting holes?
Yes, the board provides four mounting holes sized for 4-40 screws.

Overview

The SparkFun Thing Plus - RP2040 is a small development board built around the Raspberry Pi Foundation's RP2040 microcontroller. It follows the Thing Plus and Feather footprint, giving you 18 GPIO pins on a board that measures just 90 mm by 25 mm and weighs 7.81 g. Despite its size, it carries 16 MB of flash memory and 264 KB of SRAM, so firmware and data have plenty of room.

SparkFun has added practical extras for real projects: a microSD card slot, a JST single-cell battery connector with a charging circuit and fuel gauge sensor, an addressable WS2812 RGB LED, JTAG plated through-holes and the signature Qwiic connector for solder-free I2C modules.

Key Features

  • RP2040 microcontroller with a maximum clock frequency of 133 MHz
  • 16 MB flash and 264 KB SRAM in six banks
  • 18 GPIO pins on the Thing Plus / Feather footprint
  • Qwiic connector for fast I2C sensor and module connections
  • JST battery connector with charging circuit and fuel gauge
  • SD card slot for removable storage
  • WS2812 RGB LED for status indication
  • JTAG PTH pins and four 4-40 screw mounting holes

Specifications Explained

The 133 MHz RP2040 is the board's processing core, and the 264 KB of SRAM is split across six banks, which gives you working memory for buffers and stacks. The 16 MB flash is notably larger than on many comparable boards, so you can store firmware images, logs or data files without adding external memory. The 90 x 25 mm board outline and 7.81 g weight keep builds light, and the 18 GPIO pins cover digital input and output, SPI, I2C and other common interfaces. Dedicated hardware handles frequently used peripherals, while programmable IO extends support to less common protocols.

Compatibility and Requirements

The board is designed around the RP2040 and its USB 1.1 host and device functionality. It provides four 12-bit ADC channels with an internal temperature sensor, six dedicated IO lines for SPI flash with XIP support, and 30 multifunction GPIO across the RP2040 itself. A single-cell battery connects through the JST connector when you want untethered operation; the charging circuit and fuel gauge are onboard. You will need your own USB cable, battery and any Qwiic or breakout accessories, as these are not included.

Typical Uses

Makers use this board for sensor nodes, data loggers, portable controllers, LED projects and rapid prototyping where the Feather footprint and Qwiic ecosystem speed up assembly. The SD slot and large flash suit projects that record or store data, and the battery connector supports field deployments.

What's in the Box

  • 1 x SparkFun Thing Plus - RP2040

Quick specs

Item Type
Development Board
Microcontroller Chip
RP2040
Flash Memory
16 MB
SRAM
264 KB
Max. Clock Frequency (MHz)
133
Length (mm)
90
See all specifications