Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SparkFun OpenLog Artemis is a preprogrammed data logger that automatically records serial and Qwiic sensor data to a micro-SD card. Just connect a sensor and power it up—no coding required.

Key Highlights

  • Artemis module with Cortex-M4F Apollo3 microcontroller
  • Automatically logs Qwiic sensor and serial data to micro-SD
  • USB-C for configuration and firmware upload
  • On-board RTC with battery backup for time-stamped data
  • Four 14-bit ADC channels up to 1900Hz sampling
  • Wide 3.3V to 6.5V input with low-power sleep modes

Ideal For

  • Makers and hobbyists who need to log sensor data without coding
  • Environmental researchers deploying long-term sensor nodes
  • Students learning about data acquisition and microcontrollers
  • Engineers prototyping with Qwiic sensors
  • Anyone needing time-stamped CSV data from serial devices

Buying Tip

Remember that this version does not include an IMU, so choose it if you already have a motion sensor or do not need motion data.

Elecvora expert review

Our verdict

The SparkFun OpenLog Artemis is a highly practical data logger that removes the need for coding, making it accessible for beginners while offering enough flexibility for advanced users. Its wide voltage range, low power consumption, and automatic Qwiic sensor detection make it a reliable choice for field data collection.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • No coding required for basic logging
  • Automatic detection of Qwiic sensors
  • Low power consumption for long deployments
  • On-board RTC with battery backup
  • USB-C and LiPo charger simplify power and setup

Cons

  • Does not include an IMU in this version
  • Requires a micro-SD card and power source (not included)
  • Configuration via serial terminal may be less intuitive for some

Best for

Users who need a simple, reliable way to log sensor data to CSV without programming.

Not ideal for

Those who need built-in motion sensing or a plug-and-play display interface.

Specifications

Item TypeOther IoT Boards
Model No. / NameArtemis Module (Cortex-M4F based Apollo3 micro-controller)
Operating Voltage3.3V to 6.5V
ColorRed
Current consumption20mA (Run) ~80µA (Sleep) ~18µA (Deep Sleep - regulator shut down)
Shipping Weight0.005 kg
Shipping Dimensions10 × 5 × 1 cm

What's in the box

  • 1 x SparkFun OpenLog Artemis (without IMU)

Frequently Asked Questions

Do I need to write code to use the OpenLog Artemis?
No, the board comes preprogrammed to automatically log data from Qwiic sensors and serial devices. You can configure it via a serial terminal without writing any code.
What sensors are compatible with the OpenLog Artemis?
It works with Qwiic-enabled sensors and any device that outputs serial data. The board automatically detects and configures Qwiic sensors.
What is the maximum micro-SD card size supported?
The OpenLog Artemis supports micro-SD cards up to 32GB, formatted as FAT32 or FAT16.
Can I power the OpenLog Artemis with a battery?
Yes, it has a built-in MCP73831 single-cell LiPo charger, so you can connect a LiPo battery for portable operation.
Does this version include an IMU?
No, this version is supplied without an IMU. You can add an external Qwiic IMU if needed.
How do I configure the OpenLog Artemis?
Connect via USB-C, open a serial terminal at 115200bps, and press any key to access the configuration menu. Settings can be adjusted and are saved to the board.

Overview

The SparkFun OpenLog Artemis is a ready-to-use, open-source data logger that takes the hassle out of capturing sensor data. Built around the Artemis module with a Cortex-M4F based Apollo3 microcontroller, it comes preprogrammed to automatically detect, configure, and log data from Qwiic sensors and serial devices. Whether you are monitoring environmental conditions, recording GPS tracks, or capturing analog voltages, the OpenLog Artemis writes everything to a CSV file on a micro-SD card—no coding required.

This version is supplied without an IMU, making it a flexible starting point for projects where you want to choose your own motion sensor or skip motion sensing entirely.

Key Features

  • Artemis module with Cortex-M4F based Apollo3 microcontroller for efficient processing.
  • Automatic logging of Qwiic sensor and serial data to micro-SD (FAT32/FAT16 up to 32GB).
  • USB-C connectivity for configuration and firmware upload via the Artemis Firmware Upload GUI.
  • On-board RTC with 1mAhr battery backup so every data point is time-stamped.
  • Four 14-bit ADC channels on the board edge, capable of logging up to 2V at rates up to 1900Hz on one channel or 1000Hz on all four.
  • Built-in MCP73831 single-cell LiPo charger for portable operation.
  • Qwiic I2C port with power control for easy sensor connections.
  • SWD 2x5 header for advanced debugging and programming.

Specifications Explained

The operating voltage range of 3.3V to 6.5V gives you flexibility in power sources, from a single LiPo cell to higher-voltage supplies. Current consumption is remarkably low: about 20mA in run mode, 80µA in sleep, and just 18µA in deep sleep when the regulator is shut down, which is ideal for long-term battery-powered deployments. The 14-bit ADC resolution means you can capture fine voltage changes, and the maximum 2V input (with 3.3V comparison) suits many analog sensors. The RTC backup battery keeps the clock running even when main power is removed, ensuring consistent time stamps across logging sessions.

Compatibility and Requirements

The OpenLog Artemis works with Qwiic-enabled devices and serial-output sensors. It supports micro-SD cards formatted in FAT32 or FAT16 up to 32GB. Configuration is done over USB-C by opening a terminal at 115200bps; the logging output is streamed to both the terminal and the micro-SD card. Pressing any key opens the configuration menu. A single-cell LiPo battery can be connected and charged via the on-board charger. Note that this version does not include an IMU.

Typical Uses

  • Long-term environmental data logging with Qwiic sensors.
  • GPS track recording and serial data capture.
  • Analog voltage monitoring with the 14-bit ADC.
  • Field research and remote sensor nodes.
  • Rapid prototyping where data needs to be captured without coding.

What's in the Box

  • 1 x SparkFun OpenLog Artemis (without IMU)

Quick specs

Item Type
Other IoT Boards
Model No. / Name
Artemis Module (Cortex-M4F based Apollo3 micro-controller)
Operating Voltage
3.3V to 6.5V
Color
Red
Current consumption
20mA (Run) ~80µA (Sleep) ~18µA (Deep Sleep - regulator shut down)
Shipping Weight
0.005 kg
See all specifications