Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SparkFun, this plastic push button switch is a good fit for everyday home and hobby use. Main specs: manufacturer SparkFun; voltage rating (v) 2.3 to 5.5; item type Power Switch. Check that your power source supplies 2.3 to 5.5 before connecting it.

Key Highlights

  • Manufacturer: SparkFun
  • Voltage Rating (V): 2.3 to 5.5
  • Item Type: Power Switch

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerSparkFun
Voltage Rating (V)2.3 to 5.5
Item TypePower Switch
Operating Voltage2.3V to 5.5V
Operating Temperature (°C)-40°C to +85°C
I2C speed400kHz Fast I2C Bus
ConnectivityIN/OUT Qwiic Connection Ports, IN/OUT I2C Pull-Up Resistors
Board Dimensions25.4mm x 25.4mm
Weight (g)2.40g
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The SparkFun PRT-26784 PRT-26784 Qwiic Power Switch, made by SparkFun, is listed in our plastic push button switch range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: SparkFun
  • Voltage Rating (V): 2.3 to 5.5 (match this to your power supply; too high a voltage can damage the part)
  • Item Type: Power Switch
  • Operating Voltage: 2.3V to 5.5V (match this to your power supply; too high a voltage can damage the part)
  • Operating Temperature (°C): -40°C to +85°C
  • I2C speed: 400kHz Fast I2C Bus (make sure the rest of your system works at this frequency)
  • Connectivity: IN/OUT Qwiic Connection Ports, IN/OUT I2C Pull-Up Resistors (confirm your cable or board uses the same connector)
  • Board Dimensions: 25.4mm x 25.4mm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SparkFun PRT-26784 Qwiic Power Switch  gives you the power to manage your Qwiic devices more efficiently. Many Qwiic boards, especially high-power ones like our high-accuracy GNSS boards, draw significant current even in standby mode. With the QPS, you can selectively turn off these devices to conserve energy and extend your battery life. However, the QPS offers even more functionality; it includes I2C bus isolation, allowing you to mix 100kHz and 400kHz I2C devices on the same bus without conflict. Isolate slower devices to avoid slowing down communication with faster ones. For added flexibility, the QPS also provides two extra GPIO pins that can be used as inputs or outputs to control other components in your project. It works seamlessly with the SparkFun Qwiic Mux, enabling you to control and power multiple devices, even those sharing the same I2C address. Our Arduino Library makes integrating the QPS into your projects easy, with comprehensive examples for power switching, bus isolation, and GPIO control. Enhance your Qwiic projects with the SparkFun Qwiic Power Switch and take control of your power management! The SparkFun Qwiic Connect System is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.

Features:

  1. Provides Bidirectional Voltage Translation with no Direction Pin
  2. Low 3.5-Ω ON-state Resistance Between Input and Output Ports Provides Less Signal Distortion
  3.  Open-drain I 2C I/O ports (SCL1, SDA1, SCL2, and SDA2)
  4.  5-V Tolerant I 2C I/O Ports to Support Mixed-mode Signal Operation
  5. High-impedance SCL1, SDA1, SCL2, and SDA2 pins for EN = Low
  6.  Lockup-free Operation for Isolation when EN = Low
  7. Flow-through Pinout for Ease of Printed-circuit board Trace Routing
  8. Latch-up Performance Exceeds 100 mA Per JESD 78, Class II

Applications:
  1. I 2C, SMBus, PMBus, MDIO, UART, low-speed SDIO, GPIO, and other two-signal interfaces
  2.  Servers
  3.  Routers (Telecom Switching Equipment)
  4. Personal Computers
  5.  Industrial Automation

Package Includes:

1 x SparkFun PRT-26784 Qwiic Power Switch

Quick specs

Manufacturer
SparkFun
Voltage Rating (V)
2.3 to 5.5
Item Type
Power Switch
Operating Voltage
2.3V to 5.5V
Operating Temperature (°C)
-40°C to +85°C
I2C speed
400kHz Fast I2C Bus
See all specifications