Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SpeedyBee TX800 is a 5.8GHz FPV video transmitter with selectable 25–800mW output and MMCX connectivity. Its compact 20x20 mount and 5.6g weight make it a practical choice for racing and freestyle builds.

Key Highlights

  • Selectable output: PIT, 25mW, 200mW, 400mW, 800mW
  • MMCX antenna connector for secure, low-loss link
  • 20x20 mounting with M4 PCB holes and M3 heat sink holes
  • Ultra-light 5.6g without antenna
  • Built-in microphone for audio feedback
  • Wide 3.7–5V input voltage range

Ideal For

  • FPV racing pilots building lightweight 5-inch quads
  • Freestyle drone enthusiasts who need adjustable power
  • Pilots upgrading to an MMCX antenna system
  • Builders looking for a compact 20x20 VTX
  • FPV beginners who want Pit Mode for safe bench testing

Buying Tip

Check that your flight controller or PDB can supply 3.7–5V at up to 750mA, and confirm your antenna uses an MMCX connector before buying.

Elecvora expert review

Our verdict

The SpeedyBee TX800 offers a practical mix of adjustable power, MMCX connectivity, and a lightweight design that suits most FPV builds. Its Pit Mode and microphone add useful functionality without complicating installation.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Five power levels including PIT and 800mW
  • Compact and light at 5.6g
  • MMCX connector for secure antenna mounting
  • Built-in microphone
  • Flexible mounting options

Cons

  • Requires soldering for power and video connections
  • Antenna not included? Actually included, but MMCX may require adapter for SMA antennas
  • No smart audio or tramp protocol mentioned in specs

Best for

FPV pilots who need a reliable, adjustable VTX for racing or freestyle quads

Not ideal for

Pilots who prefer plug-and-play VTX units with no soldering

Specifications

Item TypeTransmitter
Frequency (GHz)5.8
Output Power (W)PIT/25mW/200mW/400mW/800mW
Working Current (mA)5V@250~750mA
Input Voltage (V)3.7-5V
Impedance (Ω)75
Antenna Connector TypeMMCX
Weight (g)5.6 (without antenna)
Size (mm)28mm*28mm@20*20
Mounting Hole Diameter (mm)M4 holes on the PCB; M3 holes on the metal heat sink
Shipping Weight0.017 kg
Shipping Dimensions6.5 × 5 × 2.3 cm

What's in the box

  • 1 x SpeedyBee TX800 5.8GHz Video Transmitter
  • 1 x MMCX antenna
  • 1 x MMCX to SMA Cable
  • 1 x 1.0mm 4pin Cable

Frequently Asked Questions

What is the maximum output power of the TX800?
The TX800 can output up to 800mW, with selectable settings for PIT, 25mW, 200mW, and 400mW.
What input voltage does the TX800 require?
It accepts 3.7–5V and draws 250–750mA at 5V, depending on the power setting.
Does the package include an antenna?
Yes, a MMCX antenna is included, along with an MMCX to SMA cable and a 4-pin cable.
Can I use the TX800 with a 1S battery?
Yes, the 3.7–5V input range supports a 1S LiPo directly, but ensure the current draw does not exceed your battery's capability.
What is Pit Mode used for?
Pit Mode reduces transmission power to a minimum so you can power up your quad in the pit area without interfering with other pilots.
What mounting pattern does the TX800 use?
It has 20x20 mounting holes on the PCB, plus M4 holes on the PCB and M3 holes on the metal heat sink for alternative mounting.

Overview

The SpeedyBee TX800 is a 5.8GHz video transmitter designed for FPV pilots who need flexible power output in a small package. It supports PIT, 25mW, 200mW, 400mW, and 800mW settings, so you can match transmission power to your flying environment and local regulations. The MMCX connector keeps the antenna interface compact and secure, while the 20x20 mounting pattern fits many modern frames.

Weighing just 5.6g without the antenna, the TX800 adds minimal weight to racing and freestyle quads. A built-in microphone captures onboard audio, and Pit Mode lets you power up without interfering with other pilots on the flight line.

Key Features

  • Adjustable power: Five output levels from PIT to 800mW give you control over range and interference.
  • MMCX connector: A popular compact antenna interface that stays put during crashes and tight builds.
  • Lightweight design: At only 5.6g, it helps keep your quad agile.
  • Smart features: Pit Mode and a built-in microphone are included for convenience and safety.
  • Flexible mounting: M4 holes on the PCB and M3 holes on the metal heat sink provide multiple installation options.

Specifications Explained

Frequency: 5.8GHz is the standard band for FPV video, offering a good balance of range and antenna size.

Output power: PIT mode transmits at very low power for bench testing or pit-area use. The 25mW setting is ideal for close-range flying or indoor use, while 200mW and 400mW suit most outdoor freestyle and racing. The 800mW setting provides maximum range for long-range or open-area flights.

Input voltage: The 3.7–5V range means the TX800 can be powered directly from a 1S LiPo or a 5V regulator on your flight controller. Working current is 250–750mA at 5V, depending on power output.

Antenna connector: The MMCX connector is smaller and lighter than SMA, making it a good fit for compact builds. Ensure your antenna has a matching MMCX plug.

Mounting: The 28x28mm board with 20x20 mounting holes fits many standard frames. M4 holes on the PCB and M3 holes on the heat sink give you options for secure installation.

Compatibility and Requirements

The TX800 requires a 3.7–5V power source and an MMCX antenna. It is designed to work with standard FPV cameras and flight controllers that provide a video input and power output. Always verify the voltage and current capabilities of your power source before connecting.

Typical Uses

This transmitter is suitable for FPV racing quads, freestyle drones, and other 5.8GHz FPV setups where adjustable power and a compact footprint are important. Use PIT mode when on the bench or in the pit area, and switch to higher power for outdoor flights.

What's in the Box

  • 1 x SpeedyBee TX800 5.8GHz Video Transmitter
  • 1 x MMCX antenna
  • 1 x MMCX to SMA Cable
  • 1 x 1.0mm 4pin Cable

Quick specs

Item Type
Transmitter
Frequency (GHz)
5.8
Output Power (W)
PIT/25mW/200mW/400mW/800mW
Working Current (mA)
5V@250~750mA
Input Voltage (V)
3.7-5V
Impedance (Ω)
75
See all specifications