
1 / 4 · Click to enlarge
AI Summary
A tiny 5V Bluetooth 4.0 stereo receiver board that adds wireless audio to DIY and modified speakers. Its 7-pin 2.54 mm header and LED status output make wiring simple in compact builds.
Key Highlights
- Bluetooth 4.0 stereo audio receiver on a 30 x 20 x 3 mm board
- Runs from a 5 VDC supply for simple project power
- 7-pin output header with 2.54 mm through-hole spacing
- LED status port shows pairing state with fast or slow flashing
- Weighs only about 2 g, ideal for small enclosures
- Includes module, LED, two capacitors and one resistor
Ideal For
- DIY speaker builders adding wireless audio
- Hobbyists repairing or upgrading old powered speakers
- Makers building compact Bluetooth audio projects
- Electronics students learning audio module wiring
- Repair technicians fitting Bluetooth into custom enclosures
Buying Tip
Confirm your project has a stable 5 VDC supply and check the 7-pin output pinout against your amplifier before soldering the module in place.
Elecvora expert review
Our verdict
A practical little board for anyone who wants to add Bluetooth audio to a DIY speaker without spending much. It is basic and requires your own wiring and power setup, but the small size and included indicator parts make it a sensible starting point.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very compact 30 x 20 x 3 mm footprint
- Simple 5 VDC power requirement
- Standard 2.54 mm through-hole output spacing
- LED status port with clear fast and slow flashing states
- Includes LED, capacitors and resistor
Cons
- Requires soldering and your own wiring
- Needs a separate 5 VDC power source
- Capacitor values may differ from product images
Best for
DIY speaker and audio project builders
Not ideal for
Users wanting a plug-and-play finished speaker
Specifications
| Operating Voltage (VDC) | 5 |
|---|---|
| Bluetooth Version | 4 |
| Dimensions (L x W x H) mm | 30 x 20 x 3 |
| Weight (g) | 2 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 3 × 2 cm |
What's in the box
- 1 x Stereo Wireless Speaker Bluetooth Module
- 1 x LED
- 2 x Capacitors
- 1 x Resistor
Frequently Asked Questions
What voltage does this Bluetooth receiver module need?
How do I know when a device is connected?
What is included with the module?
Can I use it with any speaker?
What is the pin spacing on the output header?
How should I care for the module?
Overview
This stereo wireless audio receiver module is a small add-on board for people who want to give an existing speaker a Bluetooth connection. At 30 x 20 x 3 mm and roughly 2 g, it is small enough to tuck inside a compact speaker housing or a custom DIY enclosure. The board is built around a Bluetooth 4.0 receiver and provides a 7-pin output interface with 2.54 mm through-hole spacing, which makes it straightforward to solder wires or header pins for your own wiring layout.
Power comes from a 5 VDC supply, so the module fits projects that already run on a regulated 5 V rail. A dedicated LED status port is provided; the LED flashes quickly while no Bluetooth device is connected and slows down once a connection is established, giving you a simple visual cue without extra circuitry.
Key Features
- Bluetooth 4.0 stereo audio reception for wireless playback
- Compact 30 x 20 x 3 mm board that suits tight spaces
- 5 VDC operating voltage
- 7-pin output interface with 2.54 mm through-hole spacing
- LED status port for connection feedback
- Lightweight design at about 2 g
Specifications Explained
Bluetooth 4.0
Bluetooth 4.0 is the wireless standard used by this receiver. It handles the wireless link between your phone, tablet or other source and the module, which then feeds stereo audio to your speaker electronics.
5 VDC Operating Voltage
The board expects a 5 VDC supply. Check that your project's power rail matches this before connecting the module, and make sure the supply can deliver the current your build needs.
7-Pin 2.54 mm Output Header
The output interface uses seven pins on a 2.54 mm pitch. That spacing is common in hobby electronics, so standard header pins and jumper wires can be used during testing and soldering.
LED Status Port
The status port drives an LED to indicate the Bluetooth state. Fast flashing means the module is not connected; slow flashing means a device has paired successfully. The included resistor is used in series with the LED.
Compatibility and Requirements
This module is intended for DIY speaker modification and similar audio projects. It requires a 5 VDC power source and a speaker or amplifier stage that accepts the audio output from the 7-pin interface. The LED indicator requires the supplied LED and resistor, wired to the status port and ground. No Bluetooth profile, codec or range figures are specified beyond Bluetooth 4.0, so plan your build around the listed basics.
Typical Uses
- Converting an old powered speaker into a Bluetooth-capable one
- Adding wireless audio to a custom DIY speaker enclosure
- Small audio projects where board space is limited
- Learning and prototyping Bluetooth audio wiring
What's in the Box
- 1 x Stereo Wireless Speaker Bluetooth Module
- 1 x LED
- 2 x Capacitors
- 1 x Resistor
Note: the capacitor components supplied may differ from the ones shown in product images in terms of voltage range and capacitance.
Quick specs
- Operating Voltage (VDC)
- 5
- Bluetooth Version
- 4
- Dimensions (L x W x H) mm
- 30 x 20 x 3
- Weight (g)
- 2
- Shipping Weight
- 0.005 kg
- Shipping Dimensions
- 5 × 3 × 2 cm













