Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by STMicroelectronics, this rfid readers and writers is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name X-NUCLEO-NFC03A1; silicon core number CR95HF; silicon manufacturer STMicroelectronics.

Key Highlights

  • Model No. / Name: X-NUCLEO-NFC03A1
  • Silicon Core Number: CR95HF
  • Silicon Manufacturer: STMicroelectronics

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameX-NUCLEO-NFC03A1
Silicon Core NumberCR95HF
Silicon ManufacturerSTMicroelectronics
CompatibilityFor STM32 Nucelo, Arduino Compatible
Antenna Type13.56 MHz inductive antenna etched on PCB
Shipping Weight0.2 kg
Shipping Dimensions24 × 14 × 6 cm

Overview

The STMICROELECTRONICS Expansion Board, NFC Card Reader, Read/Write, CR95HF, For STM32 Nucelo, Arduino Compatible, made by STMicroelectronics, is listed in our rfid readers and writers range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: X-NUCLEO-NFC03A1
  • Silicon Core Number: CR95HF
  • Silicon Manufacturer: STMicroelectronics
  • Compatibility: For STM32 Nucelo, Arduino Compatible
  • Antenna Type: 13.56 MHz inductive antenna etched on PCB (make sure the rest of your system works at this frequency)
  • Shipping Weight: 0.2 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 24 × 14 × 6 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The X-NUCLEO-NFC03A1 (see Figure 1) is an NFC card reader evaluation board based on CR95HF-VMD5T to enable expansion of the STM32 Nucleo boards. The CR95HF manages frame coding and decoding in Reader mode for standard applications, such as NFC, proximity, and vicinity standards. The CR95HF embeds an analog front end to provide the 13.56 MHz air interface. The CR95HF supports ISO/IEC 14443 Type A and B, ISO/IEC 15693 (single or double subcarrier), and ISO/IEC 18092 communication protocols, besides being MIFARE® Classic compatible(a). It also supports the detection, reading, and writing of NFC Forum Type 1, 2, 3, and 4 tags.

Note: For more technical details go through the datasheet in  the attachment section 


Features:

  1. NFC (Near Field Communication) card reader evaluation board based on CR95HF, designed for expansion of STM32 Nucleo boards
  2. Reader/Writer modes supported
  3.  47 mm x 34 mm, four turns, 13.56 MHz inductive antenna etched on PCB and associated tuning circuit • RF communication – ISO/IEC 14443 (A and B) – ISO/IEC 15693 – ISO/IEC 18092 – MIFARE® Classic compatible
  4. Equipped with Arduino™ UNO R3 connector
  5.  Four general-purpose LEDs
  6.  Scalable solution, capable of cascading multiple boards for larger systems

Package Includes:

1 x STMicroelectronics Expansion Board NFC Card Reader, Read/Write, CR95HF, For STM32 Nucelo, Arduino Compatible

Quick specs

Model No. / Name
X-NUCLEO-NFC03A1
Silicon Core Number
CR95HF
Silicon Manufacturer
STMicroelectronics
Compatibility
For STM32 Nucelo, Arduino Compatible
Antenna Type
13.56 MHz inductive antenna etched on PCB
Shipping Weight
0.2 kg
See all specifications