
1 / 2 · Click to enlarge
At a glance
Made by STMicroelectronics, this pic programmers and debuggers is a good fit for everyday home and hobby use. Main specs: item type Debugger; model no. / name MICROCHIP Evaluation Kit, ATSAMD10 MCU; regulator 3.3V.
Key Highlights
- Small and easy to carry or mount
- Item Type: Debugger
- Model No. / Name: MICROCHIP Evaluation Kit, ATSAMD10 MCU
- Regulator: 3.3V
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Debugger |
|---|---|
| Model No. / Name | MICROCHIP Evaluation Kit, ATSAMD10 MCU |
| Regulator | 3.3V |
| External target clk | 8MHz |
| Compatibility | Arduino shield compatible foot prints |
| Supported | Programming and debugging the ATSAMD10 Xplained Mini. The target microcontroller is the ATSAMD10. The mEDBG FW is running on the ATmega32U4 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 9 × 7 × 4 cm |
Overview
The MICROCHIP Evaluation Kit, ATSAMD10 MCU, Smart Xplained Mini, Fully Integrated On-Board Debugger, Auto-ID, made by STMicroelectronics, is listed in our pic programmers and debuggers range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Debugger
- Model No. / Name: MICROCHIP Evaluation Kit, ATSAMD10 MCU (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Regulator: 3.3V
- External target clk: 8MHz (make sure the rest of your system works at this frequency)
- Compatibility: Arduino shield compatible foot prints
- Supported: Programming and debugging the ATSAMD10 Xplained Mini. The target microcontroller is the ATSAMD10. The mEDBG FW is running on the ATmega32U4 (look up this chip to confirm it runs the firmware or libraries you plan to use)
- Shipping Weight: 0.03 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 9 × 7 × 4 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
hardware platform to evaluate the Atmel ATSAMD10 microcontroller. The evaluation kit comes with a fully integrated debugger that provides seamless integration with Atmel Studio 6.2 (and later version). The kit provides access to the features of the ATSAMD10 enabling easy integration of the device in a custom design Note: For more info refer to datasheet in attachment section
Features:
- ATSAMD10 MCU: At the core of the MICROCHIP Evaluation Kit is the ATSAMD10 MCU, a low-power, 32-bit microcontroller based on the ARM Cortex-M0+ core. With its efficient performance and wide range of peripherals, the ATSAMD10 MCU is ideal for cost-sensitive applications in automotive, industrial, and consumer electronics.
- Fully Integrated On-Board Debugger: The MICROCHIP Evaluation Kit comes with a fully integrated on-board debugger, eliminating the need for an external debugger or programmer. This built-in debugger allows for seamless programming, debugging, and real-time monitoring of your application, simplifying the development process.
- Smart Xplained Mini: The MICROCHIP Evaluation Kit, ATSAMD10 is compatible with the Smart Xplained Mini platform, providing additional flexibility and expandability. The Smart Xplained Mini adds various expansion capabilities, enabling easy connection to other peripherals, sensors, or external modules for testing and prototyping.
- Small size, easy to use & high performance
- Advanced Security Features
- Low voltage, low power consumption.
- Enhanced User Interfaces
- Best for DIY projects
Packages Includes:
1 x MICROCHIP Evaluation Kit ATSAMD10 MCU Smart Xplained Mini, Fully Integrated On-Board Debugger, Auto-IDQuick specs
- Item Type
- Debugger
- Model No. / Name
- MICROCHIP Evaluation Kit, ATSAMD10 MCU
- Regulator
- 3.3V
- External target clk
- 8MHz
- Compatibility
- Arduino shield compatible foot prints
- Supported
- Programming and debugging the ATSAMD10 Xplained Mini. The target microcontroller is the ATSAMD10. The mEDBG FW is running on the ATmega32U4


















